A novel intelligent adaptive control of laser-based ground thermal test

Laser heating technology is a type of potential and attractive space heat flux simulation technology, which is characterized by high heating rate, controlled spatial intensity distribution and rapid response. However, the controlled plant is nonlinear, time-varying and uncertainty when implementing the laser-based heat flux simulation. In this paper, a novel intelligent adaptive controller based on proportion–integration–differentiation(PID) type fuzzy logic is proposed to improve the performance of laser-based ground thermal test. The temperature range of thermal cycles is more than 200 K in many instances. In order to improve the adaptability of controller,output scaling factors are real time adjusted while the thermal test is underway. The initial values of scaling factors are optimized using a stochastic hybrid particle swarm optimization(H-PSO)algorithm. A validating system has been established in the laboratory. The performance of the proposed controller is evaluated through extensive experiments under different operating conditions(reference and load disturbance). The results show that the proposed adaptive controller performs remarkably better compared to the conventional PID(PID) controller and the conventional PID type fuzzy(F-PID) controller considering performance indicators of overshoot, settling time and steady state error for laser-based ground thermal test. It is a reliable tool for effective temperature control of laser-based ground thermal test.     

高超声速飞行器防热瓦结构的变厚度轻量化设计方法

针对非均匀气动加热条件下三维复杂防热瓦结构的轻量化需求,基于变厚度设计理念,发展了一种基于网格变形技术（ASD）和热固耦合分析相结合的防热瓦结构优化方法。优化结果表明,基于网格变形技术能够快速有效地解决优化过程中的网格自动更新问题,避免了网格重新划分的耗费及复杂结构网格重构的困难,并得到了光滑柔顺的厚度形状曲线;相比等厚设计,变厚度设计可以有效考虑载荷的非均匀效应,并极大地减轻结构重量;优化后可以更充分发挥防热瓦结构各层材料的承载能力。     

燃油加温系统的设计和研制

简要介绍了SB101高空台燃油加温系统的用途、设计方案、设计技术要求、工作原理、主要设备和调试结果。     

Climatology of extreme upper atmospheric heating events

We use a trio of empirical models to estimate the relative contributions of solar extreme ultraviolet heating, Joule heating and particle heating to the global energy budget of the earth’s upper atmosphere. Daily power values are derived from the models for the three heat sources. The SOLAR2000 solar irradiance specification model provides estimates of the daily extreme EUV solar power input. Geomagnetic power comes from a combination of satellite-derived electron precipitation power and an empirical model of Joule power derived from hemispherically integrated estimates of high-latitude heating, which we discuss in this paper. From 1975 to mid-2002, the average daily contributions were electrons: 51 GW, Joule: 95 GW and solar: 784 GW. Joule and particle heating combine to provide more than 17% of the total global upper atmospheric heating. For the top 10% and 1% of heating events, contributions rise to 20% and 25%, respectively. In the top 15 heating events, geomagnetic power contributed more than 50% of the total power budget. During three events, the Joule power alone exceeded solar power.     

Thermal protection mechanism of heat pipe in leading edge under hypersonic conditions

Sharp local structure, like the leading edge of hypersonic aircraft, confronts a severe aerodynamic heating environment at a Mach number greater than 5. To eliminate the danger of a material failure, a semi-active thermal protection system is proposed by integrating a metallic heat pipe into the structure of the leading edge. An analytical heat-balance model is established from traditional aerodynamic theories, and then thermal and mechanical characteristics of the structure are studied at Mach number 6–8 for three refractory alloys, Inconel 625, C-103, and T-111. The feasibility of this simple analytical method as an initial design tool for hypersonic aircraft is assessed through numerical simulations using a finite element method. The results indicate that both the isothermal and the maximum temperatures fall but the von Mises stress increases with a longer design length of the leading edge. These two temperatures and the stress rise remarkably at a higher Mach number. Under all investigated hypersonic conditions, with a 3 mm leading edge radius and a0.15 m design length, the maximum stress exceeds the yield strength of Inconel 625 at Mach numbers greater than 6, which means a material failure. Moreover, both C-103 and T-111 meet all requirements at Mach number 6–8.     

Energization of Plasma Species by Intermittent Kinetic Alfvén Waves

We propose a new phase-mixing sweep model of coronal heating and solar wind acceleration based on dissipative properties of kinetic Alfvén waves (KAWs). The energy reservoir is provided by the intermittent ∼1 Hz MHD Alfvén waves excited at the coronal base by magnetic restructuring. These waves propagate upward along open magnetic field lines, phase-mix, and gradually develop short wavelengths across the magnetic field. Eventually, at 1.5–4 solar radii they are transformed into KAWs. We analyze several basic mechanisms for anisotropic energization of plasma species by KAWs and find them compatible with observations. In particular, UVCS (onboard SOHO) observations of intense cross-field ion energization at 1.5–4 solar radii can be naturally explained by non-adiabatic ion acceleration in the vicinity of demagnetizing KAW phases. The ion cyclotron motion is destroyed there by electric and magnetic fields of KAWs.     

烧蚀外形计算的一种自动调节人工粘性项的差分格式

在再入端头烧蚀外形计算中,通过对物形参数的自动滤波处理,构造出了一种附加人工粘性项三层显式差分格式。这种格式在外形变化波动区达一阶精度,在外形变化平稳区达二阶精度。数值试验表明,这种格式在保障外形计算精度和增大时间步长、节省计算机时都是有效的。     

激光加工技术在工业生产中的应用

激光加工技术在工业生产中的应用愈来愈广泛，激光切割和激光表面淬火的研究和应用也很广泛，根据这两项较成熟的技术提出激光加热切削，进而改变材料的切削加工性。     

热色液晶定量测热显示技术

简要介绍了热色液晶定量测热显示技术的特点和实施方法。给出了在等熵压缩管炮风洞中进行的测热实验的初步分析结果。     

零件近净成形新工艺——差温无模锻造热力耦合有限元模拟分析

以AIS1045钢圆柱体在环形加热源局部加热下的差温无模锻造为例，利用热力耦合有限元方法模拟其成形过程。模拟结果表明，差温无模锻造作为零件近净成形的一种新工艺是可行的。差温无模锻造成形的关键是要获得和控制金属坯料内部适宜的不均匀分布温度场，加热环和冷却环的适当组合可以获得成形所需的温度分布花样。在快速变形方式下，变形前的温度分布花样基本上决定了金属的流动模式，变形过程的持续加热对其影响甚微；在慢速变形方式下，变形过程的持续加热对金属的流动模式产生一定的影响。