叶片表面喷气对叶栅性能影响的试验研究

航空发动机的不断发展,使涡轮前的温度越来越高.尽管材料科研发展迅速,但仍赶不上温度提高的要求,涡轮叶片必须采用气冷,这就对涡轮气动性能带来了影响.本文介绍了用平面叶栅吹风试验方法研究气膜冷却叶栅在各种工况下对叶栅气动性能的影响,获得了许多有价值的结论.     

平面叶栅尾流板开孔率对跨声速涡轮叶栅流道影响的数值分析

跨声速平面叶栅风洞中通常通过尾流板来改善平面叶栅周期性,针对尾流板的设计需求,利用数值模拟的方法,研究了尾流板在15%、30%、50%开孔率下对实验叶栅的影响。数值分析结果表明:叶栅尾缘激波在自由边界上反射后,返回到叶栅通道中,破坏了叶栅通道的周期性;开槽尾流板减少了反射波对叶栅通道的影响,减弱叶栅尾缘激波的反射波强度,在某特定情况下能使反射波变成膨胀波,从而提高了叶栅通道周期性;尾流板开孔率为15%时能极大地改善平面叶栅通道的周期性,相对于开孔率为50%时叶栅的周期性误差降低约16.43%。      

串联式TBCC发动机风车冲压模态性能模拟

建立了基于部件低转速特性匹配的串联式涡轮基组合循环（TBCC）发动机风车冲压模态性能计算模型,提出了压气机低转速大流量特性扩展方法,由换算扭矩代替等熵效率表示旋转部件特性,解决了低转速部件效率不连续相关问题。分析了冲压外涵面积变化和涡轮功率提取对风车冲压模态性能及部件匹配的影响规律,并基于推力、流量连续准则设计了涡轮模态至冲压模态转换过程（含风车冲压模态）的参数调节规律。计算结果表明:在风车冲压模态下,冲压外涵面积变化对风扇工作状态有显著影响,对压气机影响较小;涡轮可提取功率随着风车转速的减小先增加后降低,比冲随提取功率的增加基本呈线性降低趋势,功率提取位置（高、低压涡轮）对部件匹配有显著影响。      

Influence of leading edge with real manufacturing error on aerodynamic performance of high subsonic compressor cascades

To investigate the influence of real leading-edge manufacturing error on aerodynamic performance of high subsonic compressor blades, a family of leading-edge manufacturing error data were obtained from measured compressor cascades. Considering the limited samples, the leading-edge angle and leading-edge radius distribution forms were evaluated by Shapiro-Wilk test and quantile–quantile plot. Their statistical characteristics provided can be introduced to later related researches. The parameterization design method B-spline and Bezier are adopted to create geometry models with manufacturing error based on leading-edge angle and leading-edge radius. The influence of real manufacturing error is quantified and analyzed by self-developed non-intrusive polynomial chaos and Sobol’ indices. The mechanism of leading-edge manufacturing error on aerodynamic performance is discussed. The results show that the total pressure loss coefficient is sensitive to the leading-edge manufacturing error compared with the static pressure ratio, especially at high incidence. Specifically, manufacturing error of the leading edge will influence the local flow acceleration and subsequently cause fluctuation of the downstream flow. The aerodynamic performance is sensitive to the manufacturing error of leading-edge radius at the design and negative incidences, while it is sensitive to the manufacturing error of leading-edge angle under the operation conditions with high incidences.     

涡轮平面叶栅非轴对称端壁优化设计

开发了一套造型灵活直观、网格生成速度快的涡轮平面叶栅非轴对称端壁优化设计工具,该工具的核心技术是非均匀有理B样条(NURBS)曲面造型和网格变形.在此基础上以商业软件Isight为优化驱动器,以CFX为求解器,搭建了非轴对称端壁优化设计流程.以Pack B涡轮平面叶栅为例,对其进行了非轴对称端壁优化设计.优化后涡轮平面叶栅总压损失系数减小了12.96%.结果表明:涡轮平面叶栅端部的静压分布改变削弱了涡轮平面叶栅通道中马蹄涡、通道涡的强度,提高了涡轮平面叶栅的气动性能.      

流动参数对合成射流控制叶栅流动分离的影响

采用大涡模拟方法、结构化网格建立了低压高负荷透平Pak B叶栅的非稳态数值分析模型,研究了不同流动参数对合成射流控制叶栅流动分离的影响.控制前随着雷诺数的减小和气流攻角的增大,叶栅流动分离区域变大,在气流攻角为5°下发生分离未在尾缘前再附的情况.合成射流控制后,不同流动参数下的流动分离都得到了有效的控制,并且在射流偏角为30°时,合成射流控制效果最好.合成射流使叶栅吸力面的流动分离位置推迟,再附位置前移,分离泡尺寸减小,叶栅吸力面的逆压梯度段缩短,吸力面边界层表面的剪切层在向下游迁移的过程中,没有发生充分的抬升,避免了大尺度涡旋的形成,并且很快地黏附于壁面,进而有效地控制了流动分离.      

Modified energy cascade model adapted for a multicrop Lunar greenhouse prototype

Models are required to accurately predict mass and energy balances in a bioregenerative life support system. A modified energy cascade model was used to predict outputs of a multi-crop (tomatoes, potatoes, lettuce and strawberries) Lunar greenhouse prototype. The model performance was evaluated against measured data obtained from several system closure experiments. The model predictions corresponded well to those obtained from experimental measurements for the overall system closure test period (five months), especially for biomass produced (0.7% underestimated), water consumption (0.3% overestimated) and condensate production (0.5% overestimated). However, the model was less accurate when the results were compared with data obtained from a shorter experimental time period, with 31%, 48% and 51% error for biomass uptake, water consumption, and condensate production, respectively, which were obtained under more complex crop production patterns (e.g. tall tomato plants covering part of the lettuce production zones). These results, together with a model sensitivity analysis highlighted the necessity of periodic characterization of the environmental parameters (e.g. light levels, air leakage) in the Lunar greenhouse.     

内并联型TBCC进气道方案设计及验证

提出了一种带可变几何泄流腔的内并联型涡轮基组合循环(TBCC)进气道设计方案.介绍了进气道的总体设计思路,给出了进气道的设计马赫数、转级马赫数及飞行轨迹,对不同来流条件下进气道的工作方式以及全马赫数范围进气道型面调整的安排进行了论述,确定了进气道主要气动参数与型面参数的选取原则.通过数值模拟和高速风洞试验的手段,对进气道设计方案的可行性进行了验证.数值模拟结果表明:当Ma₀≤2.5时,进气道的总压恢复系数均在0.8以上,当2.5<Ma₀≤4.5时,进气道的总压恢复系数均在0.3以上,符合进气道总体方案的要求;冲压模态下,冲压通道的出口马赫数均小于0.4,出口静压均大于0.5个标准大气压,均能满足冲压燃烧室的燃烧需求.风洞试验结果表明:模态转换过程中,进气道涡轮通道具有良好的进/发匹配特性,且进气道涡轮/冲压通道具有良好的相容性能.研究结果可为我国开展组合动力研究提供方案参考和技术储备.      

基于复合疲劳试验的涡轮叶片振动应力反推法

提出了一种利用复合疲劳试验和外场故障数据反推涡轮叶片实际振动应力的方法.该方法针对与故障叶片同批次的叶片,开展数个振动应力水平下的单件试验和某一特定振动应力水平下的成组试验,利用极大似然法推导出叶片的概率-应力-寿命曲线(P-S-N);最后基于99.87%存活率下的概率-应力-寿命曲(P_99.87%-S-N),结合叶片的外场故障统计结果,反推出叶片实际工作中振动应力的范围和可能的最大振动应力.      

火箭引射模态下主火箭总压与RBCC发动机的匹配性

基于传统的"等压面假设"理论,建立了RBCC发动机主火箭的引射性能分析模型,研究了主火箭总压与RBCC发动机的匹配性。研究结果表明,若隔离段通道面积比小于0.65,在主火箭总压较低条件下,隔离段内二次流容易达到壅塞,无法进一步提高空气流量;在地面静止状态下,随主火箭总压增加,空气流量逐步增大,等压面上形成Fabri壅塞后,进一步增加主火箭总压,反而会降低空气流量;在火箭引射模态下,RBCC发动机的工作状态可细分为引射作用占主导地位的进气道亚临界状态和临界状态、冲压作用占主导地位的进气道超临界状态,其分界马赫数分别约为0.7和1.5。