熵产控制体方法对压气机近零间隙流动损失的演变规律

以澄清近零间隙流动结构及流动损失随间隙的变化规律为目标,提出熵产控制体分析方法,可精确量化流场任意位置的局部不可逆损失.数值模拟发现,间隙在0.4%叶高范围内(称近零间隙)效率水平最高且出现一对应峰值效率最高的最佳非零间隙.熵产控制体分析表明:通道内总熵产随间隙变化规律与效率一致;间隙变化对动叶端区20%~80%弦长范围内的熵产改变最为明显,主导了总熵产的变化;间隙变化时熵产改变的流动区域不同,这是由于动叶端区主导损失的流动结构发生改变造成的.进一步结合流场结构,探讨近零间隙流动损失演变的可能原因:间隙为零时壁面剪切力是造成损失的主导因素;最佳间隙时流动均匀,损失最小.      

RLV再入混合制导方法研究

提出可重复使用跨大气层飞行器（RLV）再入混合制导方法，该方法将再入轨道在线生成技术、基于阻力加速度飞行剖面的跟踪制导技术和数值预测制导技术有机结合。其中再入轨道在线生成能够向轨道预测制导算法提供初值，以加快轨道预测制导算法收敛速度；轨道跟踪控制器控制再入吸热，使再入轨道满足再入走廊约束；而数值预测制导算法则对再入轨道进行快速预报，生成合适的制导指令，将RLV导向目标。给出了RLV再入混合制导的具体算法，并对Marshall航天中心先进制导与控制项目所提出的九种再入情况进行了初步仿真，结果表明所提出的RLV再入混合制导方案是可行的。     

新一代多光谱扫描仪方案设计

新一代多光谱扫描仪方案设计是以某单位拟议的技术要求为依据开展的。文章简要介绍了方案设计中的设计思想、系统基本原理和关键技术原理等。该遥感器已于1999年10月完成原理样机研制,获得了满意的结果。     

加热圆管流动热阻力及熵产的数值分析

本文利用数值计算方法,对圆管加热流动的热阻力和熵产进行了综合分析研究。以空气加热圆管为例,通过联立求解流体力学基本方程和熵产方程,获得了热阻力、熵产及其随加热量、管长而变化的关系。数值分析结果表明,加热流动中的热阻力与熵产二者之间存在着对应相关的关系。     

基于能量优化的无人机机动轨迹生成方法

基于能量优化的无人机机动能够使无人机在不失去决定性位置优势的情况下获取相对于对手的能量优势，足够的能量优势可转换为有效的位置优势，有利于无人机在空战中随时改出当前机动并投入下一机动动作，对于无人机获取空战胜利至关重要。开展了基于能量优化的无人机机动轨迹生成方法研究，通过在无人机机动飞行包线内设计合适的机动指令，使得无人机能量性能指标最优。以上升转弯机动为例进行了机动轨迹生成的详细设计，并与常规上升转弯机动轨迹生成结果进行对比，仿真结果显示所设计的机动动作完成时间缩短了28.6%~83.8%，总能量变化减少了64.7%~70.1%，实现了无人机机动飞行的能量优化。     

Experimental study on ceramic membrane technology for onboard oxygen generation

The ceramic membrane oxygen generation technology has advantages of high concentra-tion of produced oxygen and potential nuclear and biochemical protection capability. The present paper studies the ceramic membrane technology for onboard oxygen generation. Comparisons are made to have knowledge of the effects of two kinds of ceramic membrane separation technologies on oxygen generation, namely electricity driven ceramic membrane separation oxygen generation technology (EDCMSOGT) and pressure driven ceramic membrane separation oxygen generation technology (PDCMSOGT). Experiments were conducted under different temperatures, pressures of feed air and produced oxygen flow rates. On the basis of these experiments, the flow rate of feed air, electric power provided, oxygen recovery rate and concentration of produced oxygen are compared under each working condition. It is concluded that the EDCMSOGT is the oxygen generation means more suitable for onboard conditions.     

EPT-200高频声发生器在航天器噪声 环境试验中的应用

文章针对提高目前使用的高声强混响室-2163m3混响室声场的高频性能,对两个EPT-200高频声发生器系统进行分析评估。首先采用开环噪声试验,验证其性能指标是否满足要求;然后采用闭环噪声试验,以考察2163m3混响室声场的高频性能。分析结果表明:EPT-200声发生器性能指标满足要求,并且提高了2163m3混响室的高频性能。     

Analysis of the solar sail deformation based on the point cloud method

The deformation of the solar-sail membrane is an important factor for causing inaccuracies in the solar-sail missions. This paper describes the solar sail under deformation by using a new modelling technique based on point cloud and triangular mesh generation. Two types of deformation, stemming from wrinkling and billowing, are modelled. The changes in the solar radiation pressure force and the moment caused by deformation are calculated and compared to the ideal non-deformed case. The heliocentric spiral trajectory and the orbital angular momentum reversal trajectory are taken as examples to quantify the influence of the deformation from an orbit point of view. Additionally, point cloud simplification, based on the normal vector and bounding box, is utilized to simplify the original deformed-sail model. It involves a reasonable reduction and renewal of the points in the model considering the variation of surface curvature. The simplification and its modelling accuracy are numerically investigated as well as computational efficiency.     

Impact of a novel hybrid accelerometer on satellite gravimetry performance

The state-of-the-art electrostatic accelerometers (EA) used for the retrieval of non-gravitational forces acting on a satellite constitute a core component of every dedicated gravity field mission. However, due to their difficult-to-control thermal drift in the low observation frequencies, they are also one of the most limiting factors of the achievable performance of gravity recovery. Recently, a hybrid accelerometer consisting of a regular EA and a novel cold atom interferometer (CAI) that features a time-invariant observation stability and constantly recalibrates the EA has been developed in order to remedy this major drawback. In this paper we aim to assess the value of the hybrid accelerometer for gravity field retrieval in the context of GRACE-type and Bender-type missions by means of numerical closed-loop simulations where possible noise specifications of the novel instrument are considered and different components of the Earth’s gravity field signal are added subsequently. It is shown that the quality of the gravity field solutions is mainly dependent on the CAI’s measurement accuracy. While a low CAI performance (10^?8 to 10^?9?m/s²/Hz^1/2) does not lead to any gains compared to a stand-alone EA, a sufficiently high one (10^?11?m/s²/Hz^1/2) may improve the retrieval performance by over one order of magnitude. We also show that improvements which are limited to low-frequency observations may even propagate into high spherical harmonic degrees. Further, the accelerometer performance seems to play a less prominent role if the overall observation geometry is improved as it is the case for a Bender-type mission. The impact of the accelerometer measurements diminishes further when temporal variations of the gravity field are introduced, pointing out the need for proper de-aliasing techniques. An additional study reveals that the hybrid accelerometer is – contrary to a stand-alone EA – widely unaffected by scale factor instabilities.     

太赫兹脉冲测量技术及其在计量领域的应用CSCD

本文对国内外太赫兹脉冲的产生和测量技术进行了综述,详细介绍了太赫兹脉冲产生与测量技术的原理和优缺点,以及太赫兹脉冲技术在宽带示波器、超快光电探测器、超快脉冲产生器等仪器设备计量中的应用。