机翼/外挂系统的颤振主动抑制研究

 本文对颤振主动抑制控制律进行了研究。研究对象为一小展弦比带外侧导弹的机翼颤振模型,模型具有外侧后缘控制面。依据该模型的全部动力特性和刚度特性,以最优控制为基础,采用动态补偿器方法,设计了两阶控制律。对该控制律进行了风洞实验验证。实验结果表明:颤振临界速度提高了14％以上。理论计算结果与实验结果一致。     

洪都集团企业级信息系统数据备份策略研究

分析了洪都集团当前企业级信息系统数据备份系统中存在的问题,结合目前的主流数据备份策略,提出了基于SAN(存储局域网)的高速、可靠、安全的洪都集团新的企业级信息系统数据备份策略。     

网上考试系统的设计与实现

本文讨论了一种新的考试方法———网上考试 ,并讨论了一种基于B/S系统实现网上考试的思路和设计方法 ,并对实现网上考试系统的部分关键技术进行了分析     

民机数据总线信号综合测试仪

介绍的民机数据总线信号测试仪综合了当前民机上主要采用的ARINC429、ARINC419、CSDB和RS232等数字式航空数据总线规范的接口，具有和这些总线接口设备通讯的能力，可以灵活方便地应用于机载设备检测，装机交联实验当中。     

TiAl合金不同钛铝比层片组织的稳定性

对钛铝比为１．１７４、１．１０５和１．０４１的（ＴｉＡｌ）－２．５Ｖ－１Ｃｒ（ａｔ％）合金层片组织在１３２３Ｋ热暴露中的组织变化进行了观察和分析。发现钛铝比对ＴｉＡｌ合金层片组织的稳定性和失稳分解机理有重要影响，钦铝比适当大于１：１（如１．１０５）的合金可以得到稳定性更好的层片组织。     

短纤维增强复合材料纤维和界面层残余热应力分析

基于应力传递的剪滞理论，详细分析推导了纤维中的残余热正应力和界面层中的剪应力解析公式，并与已有的理论公式进行了比较。同时分析了纤维与基体脱粘的原因及热残余应力主要影响因素，主要包括：纤维和界面层材料的弹性模量，界面层的厚度以及纤维的长径比等。通过分析得出：纤维中的压应力和界面层中的剪应力都随着界面层的厚度及其弹性模量的增大而增大；纤维长径比的大小对纤维中的压应力和界面层中的剪应力大小及分布的影响很小。     

槽外聚能式超声波法清除燃油总管内腔积碳

为了克服用传统方法清除燃油总管内腔积碳的不彻底性，提出了槽外聚能式超声波清洗法。首先着重介绍了应用槽外聚能式超声波清洗技术清除发动机燃油总管内腔积碳的基本原理然后介绍了燃油总管专用超声波清洗机的开发与研制，以及超声波清洗工艺的研究过程，最终确定了槽外聚能式超声波清洗法清除燃油总管内腔积碳的清洗液配方和工艺路线。并成功应用于某大修机的生产过程。     

基于FW-H方程的旋翼气动声学计算研究

由流体力学N S方程导出的非齐次波动方程———FfowcsWilliams Hawkings方程(简称FW H方程),可以精确地描述在静止流体中运动的物体与流体相互作用的发声问题。以FW H方程为理论模型,将旋翼桨叶运动发声问题等效为包含桨叶的任意运动控制面(声源面)的声辐射问题,并在旋翼绕流Euler方程数值模拟的基础上,在时域内计算了悬停旋翼和前飞旋翼的声场。应用于UH 1H和AH 1/OLS两种旋翼模型的气动声学计算表明:计算结果与噪声实验值符合良好;所研制的程序不仅能够较准确地计算单极子噪声和偶极子噪声,而且具有较强的跨音速四极子噪声预测能力。     

Deep Impact: Working Properties for the Target Nucleus – Comet 9P/Tempel 1

In 1998, Comet 9P/Tempel 1 was chosen as the target of the Deep Impact mission (A’Hearn, M. F., Belton, M. J. S., and Delamere, A., Space Sci. Rev., 2005) even though very little was known about its physical properties. Efforts were immediately begun to improve this situation by the Deep Impact Science Team leading to the founding of a worldwide observing campaign (Meech et al., Space Sci. Rev., 2005a). This campaign has already produced a great deal of information on the global properties of the comet’s nucleus (summarized in Table I) that is vital to the planning and the assessment of the chances of success at the impact and encounter. Since the mission was begun the successful encounters of the Deep Space 1 spacecraft at Comet 19P/Borrelly and the Stardust spacecraft at Comet 81P/Wild 2 have occurred yielding new information on the state of the nuclei of these two comets. This information, together with earlier results on the nucleus of comet 1P/Halley from the European Space Agency’s Giotto, the Soviet Vega mission, and various ground-based observational and theoretical studies, is used as a basis for conjectures on the morphological, geological, mechanical, and compositional properties of the surface and subsurface that Deep Impact may find at 9P/Tempel 1. We adopt the following working values (circa December 2004) for the nucleus parameters of prime importance to Deep Impact as follows: mean effective radius = 3.25± 0.2 km, shape – irregular triaxial ellipsoid with a/b = 3.2± 0.4 and overall dimensions of ∼14.4 × 4.4 × 4.4 km, principal axis rotation with period = 41.85± 0.1 hr, pole directions (RA, Dec, J2000) = 46± 10, 73± 10 deg (Pole 1) or 287± 14, 16.5± 10 deg (Pole 2) (the two poles are photometrically, but not geometrically, equivalent), Kron-Cousins (V-R) color = 0.56± 0.02, V-band geometric albedo = 0.04± 0.01, R-band geometric albedo = 0.05± 0.01, R-band H(1,1,0) = 14.441± 0.067, and mass ∼7×10¹³ kg assuming a bulk density of 500 kg m⁻³. As these are working values, {i.e.}, based on preliminary analyses, it is expected that adjustments to their values may be made before encounter as improved estimates become available through further analysis of the large database being made available by the Deep Impact observing campaign. Given the parameters listed above the impact will occur in an environment where the local gravity is estimated at 0.027–0.04 cm s⁻² and the escape velocity between 1.4 and 2 m s⁻¹. For both of the rotation poles found here, the Deep Impact spacecraft on approach to encounter will find the rotation axis close to the plane of the sky (aspect angles 82.2 and 69.7 deg. for pole 1 and 2, respectively). However, until the rotation period estimate is substantially improved, it will remain uncertain whether the impactor will collide with the broadside or the ends of the nucleus.     

芳纶纤维／环氧复合材料界面超声连续改性处理

运用超声技术在芳纶/环氧复合材料制备过程中对其界面进行改性处理,分析了超声处理过程中纤维与树脂之间浸润性的变化趋势以及超声作用对复合材料界面性能和力学性能的影响。结果表明:超声是通过改善纤维与树脂之间的浸润性,提高复合材料的界面性能及力学性能。