让老师快乐地走进课堂

中职学生自我约束、自我学习能力差,中职教师面临教好书与管好学生的双重压力。通过体制与机制的完善,鼓励教师欣然地面对挑战,教师才会发现教书的乐趣,才会激发求知的欲望,才会参与教学的改革,才会产生对学校强烈的归属感、自豪感和使命感。提升了教师的积极性,老师才会快乐地走进课堂。     

High-temperature tribological behaviors of a Cr-Si co-alloyed layer on TA15 alloy

A Cr-Si co-alloyed layer was successfully deposited on TA15 alloy by the double glow plasma surface technology to improve its poor wear resistance at elevated temperature.The microstructure,composition,and phase structure of the layer were investigated by SEM,EDS,and XRD.The tribological behaviors of the Cr-Si co-alloyed layer at 20 ℃ and 500 ℃ were analyzed in details.The results indicated that the friction coefficient and wear rate of the Cr-Si coalloyed layer at 20 ℃ and 500 ℃ were much lower than those of the substrate,which was due to higher hardness and superior elastic modulus.This layer may become an approach to effectively improving the wear resistance of TA15 alloy at elevated temperature.     

民用客机液压系统逻辑控制单元故障分析及排除

通过采用故障树的分析方法,运用故障机理分析、故障定位及故障复现的故障归零思路,分析了逻辑控制单元的设计规范及其变更,进行了新旧逻辑控制单元的对比试验,检查了逻辑控制单元与飞机的交联信号等,最终定位故障在逻辑控制单元内部元件失效,顺利排除了故障。     

机场竞争力评价指标体系的构建

本文首先分析总结了机场竞争力的形成机理,在此基础上提出了机场竞争力的评价原则,最后,构建了一套包含4个一级指标、16个二级指标和41个三级指标的机场竞争力评价指标体系,旨在通过这套评价体系对机场的竞争力发展水平进行评估,找出机场竞争力发展过程中的优势不足,为机场在市场竞争中提高竞争力水平和核心竞争力提供科学的参考依据.     

Investigation of high-speed abrasion behavior of an abradable seal rubber in aero-engine fan application

Abradable seal rubber has been widely used in aero-engine fans to improve their efficiency by reducing the clearance between rotating and stationary components. To investigate the high-speed scraping behavior between a vulcanized silicone rubber and a Ti-6Al-4V fan blade and evaluate the abradable performance of seal rubber, abrasion tests were conducted at a blade tip velocity of 50–300 m/s with an incursion rate of 100 lm/s. The influences of the blade tip velocity on the wear mechanism and interaction forces were specially analyzed. It is shown that abrasive wear and pattern wear are the predominant wear mechanisms, and pattern wear can be seen as the emergence and propagation of cracks. With an increase of the blade tip velocity, both of the final incursion depth and wear mass loss of seal rubber exhibit growth trends. The gradual changes of rubbing forces with an increase of rubbing time are the characteristic of abrasive wear, and force curves with unstable mutations are a reflection of pattern wear. At a constant incursion rate of 100 lm/s, the maximum values of interaction forces decrease first and then grow with an increase of the blade tip velocity, and the blade tip velocity of 150 m/s becomes the cut-off point between abrasive wear and pattern wear.     

Structural Design and Control Strategy Analysis of Micro/Nano Transmission Platform

A fully flexure micro/nano transmission platform(MNTP)which has five degrees of freedom is designed on the basis of bridge type amplification mechanism.According to the kinematic theory and the elastic beam theory,the theoretical output displacement equation of the platform is derived,and then piezoelectric actuator(PZT)is calibrated.Meanwhile,a full closed-loop control strategy of the platform is established using the feedforward proportional-integral-derivative(PID)compound control algorithm based on the Preisach model.Moreover,the total transfer function of the micro positioning system is derived,and the calculation method of output signal is acquired.Finally,the theoretical output displacement is verified by finite element analysis(FEA)and positioning experiments.     

高校战略人力资源管理系统模型的构建

在战略人力资源管理理论的基础之上,提出了高校战略人力资源管理系统模型构建的方法,分别从系统的目标、运行机制、维度等方面进行了分析。高校战略人力资源管理系统的目标包括社会与经济两个方面的效益实现,运行机制包括激励、学习、约束、牵引与压力等方面,而维度则包括人力资源的招聘、培训、考核、管理、沟通等方面。通过高校战略人力资源管理系统模型的架设,以及针对现阶段高校人员管理方法的探究,缓解我国高等教育人力资源管理方面的压力。     

凹腔火焰稳定器回流区稳焰机理

借助凹腔火焰稳定器模型的数值计算结果研究了高总焓超声速流条件下凹腔火焰稳定器回流区中可能存在的稳焰机制。研究表明,高总焓来流条件下凹腔火焰稳定器回流区中至少存在着三种稳焰机制：回流区燃烧机制、回流区点燃机制和回流区整流机制。三种稳焰机制分别利用了高焓来流条件下回流区的三种不同特性：回流区燃烧机制利用了回流区的混合特性;回流区点燃机制利用了回流区的高温特性;回流区整流机制利用了回流区的阻流特性。计算结果表明,三种稳焰机制都有可能成为凹腔火焰稳定器回流区中起主导作用的稳焰机制。     

星载天线指向精度建模与分析

随着天线定位机构运动日趋复杂以及对定位机构任务要求的不断提高,提高指向精度已成为星载天线机构能力提升的核心。综合考虑卫星姿态控制误差、展开机构误差、双轴驱动机构误差和反射面误差等因素,利用齐次变换矩阵得到天线指向运动学误差等式,从而得到天线指向精度分析的一般方法。以某星载点波束定位机构为例,对各误差源的影响进行了分析,...