挠性高稳定度卫星载荷扰动力矩补偿研究

有效载荷或星上运动部件相对卫星平台转动引入的扰动力矩严重影响卫星平台的姿态稳定度和指向精度.为满足卫星姿态高稳定度要求,采用正余弦细分驱动原理对帆板驱动机构(SADA)细分,并利用力矩补偿机构补偿有效载荷运动所引入的扰动力矩.此外,针对补偿机构自身存在的摩擦力矩设计补偿控制律,以改善其力矩输出性能.仿真算例表明设计方案有效.     

捕获轨迹系统并联机构地面标定方法

捕获轨迹系统（CTS）是一种先进的预测外挂物投放轨迹的试验系统，普遍采用六自由度（6-DoF）串联机构作为其运动机构，串联机构因惯性力大和关节累积误差大使其定位精准度不足。相比串联机构，并联机构具有惯性力小和关节误差不累积等优点。采用6-PTRT并联机构作为CTS试验系统的六自由度运动机构，在空间受限的风洞环境中对CTS并联机构进行地面标定：提出动平台位姿的测量和计算方法，建立包含直线驱动平台安装夹角修正的标定模型，并基于非线性最小二乘法辨识结构参数。辨识后CTS并联机构的位移定位准度优于0.1 mm，姿态定位准度优于0.05°，最后以CTS并联机构和常规攻角机构进行8#标模的对比风洞试验。风洞试验结果表明，CTS并联机构的风载定位准度满足测力试验精准度要求。     

空间展开机构初步原理分析与方案构想

文章论述了空间精密展开机构的特点及设计原理，并对展开机构的支撑形式以及关键部件进行了分析及提出构想。     

大口径长焦距空间相机热门机构方案研究

相机热门是大口径高分辨率空间相机的关键部件。文章概要介绍了空间相机热门机构的组成、工作原理及设计要点。     

一种二自由度球形五杆并联机构的运动学分析

应用螺旋理论分析一种二自由度球形五杆并联机构的运动螺旋及其反螺旋，在此基础上分析了其自由度。建立其位置正、反解方程，并进行验证。应用螺旋理论建立了其一阶影响系数矩阵。     

ESO-based event-triggered attitude control of spacecraft with unknown actuator faults

An event-triggered control strategy based on extended state observer (ESO) is proposed for the attitude tracking problem of small plug-and-play spacecraft with uncertain inertia parameters, external disturbances, and actuator faults. A simplified controller is developed based on the angular velocity and the general disturbances estimated by the provided ESO using the information of the system inputs and the angular velocities. In the designed event-triggered sampling mechanism, a state-dependent event-triggered strategy determines the triggering instant of the controller to reduce the frequency of information transmission between the controller and the actuator. In comparison with the previous literature, this paper considers uncertain inertia parameters, external disturbances, and actuator faults as general disturbances estimated by ESO, especially for the actuator faults. The inputs of ESO are the error of the angular velocities, which can simplify the controller design. Moreover, the designed ESO can effectively attenuate the influence of measured noises generated by the gyroscopes. The proposed event-triggered policy balances the performance of event-triggering and the control stability performance, which reduces the final state convergence regions without increasing more triggering times compared to existing studies. Furthermore, the investigated policy achieves Zeno-free triggering. Numerical simulations verify theoretical results.     

基于灰色预测的加速试验机理一致性判定方法

确定失效机理一致性条件是保证加速试验正确性的前提之一.由于现有的一致性判定方法只能利用加速试验数据,不能指导加速试验设计,因此需要一种基于强化试验数据的一致性判定方法.针对工程中强化试验数据少的特点,选取可以处理少数据的灰色预测,给出了一致性判定的新方法及流程.该方法通过将灰色预测中的GM(1,1)和等维新息模型相结合,找出强化试验数据的趋势改变点,在加速试验之前得到机理一致性变化的条件.通过在加速度计中的应用案例,验证了该方法的可行性.     

喷嘴式隔板与纵向肋式隔板阻尼效应分析

利用声学模型和单喷嘴声学模拟试验研究了喷嘴式隔板的耗散机理;用数值方法分析了纵向肋式隔板周围的涡流;用声学理论研究了纵向肋式隔板的声场。研究结果表明:选取合适的管间隙将会使喷嘴式隔板具有更好的稳定性作用;肋片周围是涡流产生的主要区域;肋高对燃烧室声学特性的影响远大于肋长。     

A novel approach of testability modeling and analysis for PHM systems based on failure evolution mechanism

Prognostics and health management (PHM) significantly improves system availability and reliability, and reduces the cost of system operations. Design for testability (DFT) developed concurrently with system design is an important way to improve PHM capability. Testability modeling and analysis are the foundation of DFT. This paper proposes a novel approach of testability modeling and analysis based on failure evolution mechanisms. At the component level, the fault progression-related information of each unit under test (UUT) in a system is obtained by means of failure modes, evolution mechanisms, effects and criticality analysis (FMEMECA), and then the failure-symptom dependency can be generated. At the system level, the dynamic attributes of UUTs are assigned by using the bond graph methodology, and then the symptom-test dependency can be obtained by means of the functional flow method. Based on the failure-symptom and symptom-test dependencies, testability analysis for PHM systems can be realized. A shunt motor is used to verify the application of the approach proposed in this paper. Experimental results show that this approach is able to be applied to testability modeling and analysis for PHM systems very well, and the analysis results can provide a guide for engineers to design for testability in order to improve PHM performance.     

Study on ballistic penetration resistance of titanium alloy TC4, Part II: Numerical analysis

Enhancing containment capability and reducing weight are always great concerns in the design of casings. Ballistic tests can help to mitigate a catastrophic event after a blade out, yet taking time and costing money. A wise way is to hunt for a validated numerical simulation technology, through which the material dynamic behavior over the strain rate range in the ballistic tests should be represented and reasonable failure strain should be defined. The simulation results show that the validation of the numerical simulation technology based on the test data can accurately estimate the absorption energy, describe the physical process and failure mode during the penetration, as well as the failure mechanism. It is found that energy dissipation of projectiles is in manner of compression stage, energy conversion stage, and interactive scrap stage. An effect indicator is proposed, where the factors of critical velocity including impact orientation and mass of projectiles and thickness of casings are considered. The critical velocity presents a linear relation with the effect indicator, which implies the critical velocity obtained by the flat casing could underestimate the capability of the real casing.