Two-Dimensional Modal Curvature for Damage Detection in Plates

Mode shape has become a hotspot of vibration-based damage detection in plates.Two-dimensional(2D)modal curvature(MC2D),derived from mode shapes,is a prevailing physical quantity used to indicate damage.Unfortunately,the physical mechanism of MC2 Dfor characterizing damage in plates has not been clarified to date.In contrast,one-dimensional(1D)modal curvature(MC1D)has explicit physical mechanism to portray damage in beams.Unresolved physical mechanism of MC2 Dseverely hampers its applications for damage identification in plates.To address this deficiency,the clarification mechanism of MC2 Dis investigated to identify damage.With the clarified mechanism,numerical and experimental cases are used to demonstrate the effectiveness of MC2 Din detecting damage in plates.     

Studies of polar mesosphere summer echoes with the EISCAT VHF and UHF radars: Information contained in the spectral shape

The nature of PMSE in the VHF and UHF frequency range is considered taking into account the shape of corresponding Doppler spectra. Assuming a turbulence-based model of PMSE it is argued that for cases where a VHF radar detects strong PMSE, the UHF radar could either detect enhanced coherent scattering caused by the same physical process as in the VHF (i.e., turbulence with large charged ice particles), there could be incoherent scattering modified by the charged ice particles, or there could be a mixture of both. In order to distinguish these cases a simple but robust method is introduced to characterize the shape of the Doppler spectra derived from observations at both frequencies. Spectral shapes are quantified with one simple fitting parameter of a generalized fit to the autocorrelation function (=Fourier transform of the Doppler spectrum). This parameter takes a value of 1 for a Lorentzian spectrum indicative of pure incoherent scatter from the D-region, a value of 2 for coherent scatter owing to turbulence, and a value of less than 1 for incoherent scatter modified by the presence of charged aerosol particles. This method is applicable to observations at altitudes between ∼70 and ∼90 km. Simultaneous observations with the EISCAT VHF and UHF radar are presented in which all three cases mentioned above are identified. For the case of incoherent scatter modified by the presence of charged aerosol particles we quantify the radius of the involved ice particles to exceed ∼5 nm. Most importantly, however, for the case where the UHF-signal exceeded the incoherent scatter signal significantly, the spectrum revealed a clear Gaussian shape indicative of a coherent scattering process with identical spectral width as for the VHF-observations. This finding gives strong support that both echoes are created by the same turbulence-based mechanism and not by different mechanisms as speculated by several previous authors.     

基于代理模型的高效全局气动优化设计方法研究进展

基于高可信度计算流体力学的数值优化设计方法，在提高飞行器气动与综合性能方面正发挥着越来越重要的作用。基于代理模型的优化算法（SBO），由于能够实现高效全局优化，逐渐成为了气动优化设计领域的研究热点之一。近20年来，代理优化算法研究已取得了长足进步，多种先进的新型代理模型被提出，优化理论和算法也不断完善和发展。以飞行器精细化气动优化设计为背景，综述了基于代理模型的高效全局气动优化设计方法研究进展。首先，介绍了基于变可信度代理模型的气动优化设计方法、结合代理模型和伴随方法的气动优化设计方法以及基于非生物进化的并行气动优化设计方法的研究现状和最新进展。然后，针对飞行器气动优化设计学科领域的前沿问题，介绍了基于代理模型的多目标气动优化设计方法、混合反设计/优化设计方法、稳健气动优化设计方法的研究进展，以及基于代理模型的多学科优化设计方法的研究进展。文献综述表明，代理优化算法在设计效率、全局性以及鲁棒性等方面性能优良，已经发展到可以解决100维（100个设计变量）以内的气动优化设计问题，具有良好的工程应用前景。最后，探讨了基于代理模型的高效全局气动优化设计在理论、方法及飞行器设计应用方面所面临的问题和挑战，给出了未来研究方向的建议。     

基于飞机油箱模型形状特征的油量测量

在分析飞机数字式油量测量过程中目前广泛使用的切片法油量测量原理的基础上,针对现有的定步长切片法无法得到准确、可靠的燃油质量特性数据库的缺陷,结合对飞机油箱模型形状特征的分析,提出了基于飞机油箱模型形状特征的油量测量切片步长选择方法.此方法包括切片步长整体和局部选择两个过程,整体选择以实现相邻两切片平面所夹油箱模型体积近似相等为目的来确定切片步长,以体现油箱模型截面整体变化规律;局部选择以设计切片平面与截面突变平面重合或尽可能接近的方式,突出油箱截面的局部变化特征.实验结果表明:该切片步长选择方法较定步长方法能够建立更为合理、可靠的燃油质量特性数据库,从而提高了油量测量精度.     

基于CST参数化的翼型优化遗传算法研究

用外形建模的CST参数化方法,构建翼型几何可直接利用其后缘角、前缘半径等几何特征,其控制参数更能反映翼型特有的气动敏感性,有助于遗传算法搜索寻优。基于这一参数化方法,结合遗传算法,构造了用于翼型优化的设计方法。算法中,CST控制参数作为设计变量,采用二进制编码,并通过引入精英策略,提高了遗传算法的收敛性能。算法适应度评估涉及的流场求解则采用了基于Jameson有限体积法的Euler方程解算程序。先以NACA0012翼型为例,以其某一已知的表面压力分布为目标,进行了遗传算法的重构运算,给出了重构的翼型几何外形,验证了方法。在此基础上,进行了带约束的跨音速翼型优化设计,给出了升力系数极大化和阻力系数极小化等设计算例,展示出翼型优化设计的效果。     

新型固态电压标准的研制

介绍了低成本、高稳定的固态电压标准器的研制 ,该标准器可取代 0 .0 0 0 5级以下的标准电池 ,具有较高的应用和推广价值。     

SOCIT4 collisional-breakup test data analysis: With shape and materials characterization

In this paper we revisit the 1995 Kaman database of the SOCIT4 fragment characteristics with added analysis of a subset of the cataloged fragments from the test. This database was compiled from the last of a series of four hypervelocity impact tests conducted under a U.S. Department of Defense program in 1991–1992. This test targeted a flight-ready, U.S. Transit navigation satellite, yielding collision fragments in the size regime of sub-millimeter through tens of centimeters. Results in this database were used in the 1998 NASA Standard Breakup Model to represent characteristic length (size) and area-to-mass distributions of fragments smaller than 10 cm.     

非圆截面弹体附加表面积工程估算方法研究

引入附加质量、附加表面积的概念 ,给出基于细长体理论的非圆截面弹体附加表面积的工程估算方法 ,并提出了计算带倒角圆的正方形和不同顶角菱形附加表面积的通用公式 ,通过计算值与理论值的比较 ,误差在 2 %以内。并通过利用附加表面积计算的弹体法向力系数与试验值进行比较 ,法向力系数计算误差在 10 %以内 ,说明用本方法计算的附加表面积可以在工程初步估算时应用。     

火星探测器气动外形/弹道一体化多目标优化

针对火星探测器概念设计阶段的需求,提出了融合气动外形、弹道和开伞条件的一体化多目标优化设计方法。首先建立了火星探测器进入段三自由度弹道运动方程,基于修正牛顿理论推导了适用于具有较大半锥角球锥外形的气动参数估算模型,采用Sutton-Graves公式计算了驻点热流密度。以开伞高度、总吸热量和容积率为目标函数建立了火星探测器气动外形/弹道一体化多目标优化模型,采用基于分解的多目标进化算法(MOEA/D)进行求解计算并与参考设计进行了对比。数值结果表明:多目标优化方法提供多个三目标均优于参考设计的Pareto最优解,为火星探测器的概念设计提供了一定的参考依据。