无网格法耦合RNG k-ε湍流模型在亚、跨声速翼型黏性绕流中的数值模拟

基于移动最小二乘无网格方法,耦合RNG(Re-Normalisation Group)k-ε湍流模型求解雷诺平均Navier-Stokes方程。采用AUSM(Advection Upstream Splitting Method)+-up迎风格式求解数值通量,应用在高度各向异性点云结构中取得良好结果的点云重构技术结合移动最小二乘法拟合空间导数,并用三阶SSP(Strong Stability Preserving)型Runge-Kutta显式时间推进格式求解离散后的控制方程。在此基础之上,实现了对NACA0012、RAE2822翼型亚、跨声速黏性绕流的数值模拟,给出了翼型表面压力系数分布曲线、不同位置处的平均速度剖面、马赫数等值线等计算结果,并与实验值及相关文献数值模拟结果进行比较,结果吻合较好。表明所发展的结合点云重构技术的无网格方法耦合RNGk-ε湍流模型能够成功模拟翼型亚、跨声速黏性绕流,验证了所提算法的有效性,并拓展了无网格方法求解湍流流动的途径。     

一种基于冗余测量的自适应卡尔曼滤波算法

针对目前自适应滤波算法的不足,在测量系统量测噪声方差未知的情况下,设计了一种基于冗余测量的自适应卡尔曼滤波(RMAKF)算法。通过对系统冗余测量值的一阶、二阶差分序列进行有效的统计分析,可以准确估计系统量测噪声统计特性,进而在滤波过程中自适应调节噪声方差阵R,提高滤波精度。以全球定位系统/惯性导航系统(GPS/INS)松组合导航系统为对象进行了仿真实验,结果表明该算法在测量系统噪声特性未知或发生改变时,可对其进行准确估计,在采用低精度惯性器件情况下,滤波结果较其他主要自适应卡尔曼滤波算法有较明显的改进。     

Practical compensation for nonlinear dynamic thrust measurement system

The real dynamic thrust measurement system usually tends to be nonlinear due to the complex characteristics of the rig, pipes connection, etc. For a real dynamic measuring system,the nonlinearity must be eliminated by some adequate methods. In this paper, a nonlinear model of dynamic thrust measurement system is established by using radial basis function neural network(RBF-NN), where a novel multi-step force generator is designed to stimulate the nonlinearity of the system, and a practical compensation method for the measurement system using left inverse model is proposed. Left inverse model can be considered as a perfect dynamic compensation of the dynamic thrust measurement system, and in practice, it can be approximated by RBF-NN based on least mean square(LMS) algorithms. Different weights are set for producing the multi-step force, which is the ideal input signal of the nonlinear dynamic thrust measurement system. The validity of the compensation method depends on the engine’s performance and the tolerance error0.5%, which is commonly demanded in engineering. Results from simulations and experiments show that the practical compensation using left inverse model based on RBF-NN in dynamic thrust measuring system can yield high tracking accuracy than the conventional methods.     

Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding

Nanoparticles with the anti-wear and friction reducing features were applied as cooling lubricant in the grinding fluid. Dry grinding, flood grinding, minimal quantity of lubrication（MQL）, and nanoparticle jet MQL were used in the grinding experiments. The specific grinding energy of dry grinding, flood grinding and MQL were 84, 29.8, 45.5 J/mm³, respectively. The specific grinding energy significantly decreased to 32.7 J/mm³ in nanoparticle MQL. Compared with dry grinding, the surface roughness values of flood grinding, MQL, and nanoparticle jet MQL were significantly reduced with the surface topography profile values reduced by 11%, 2.5%, and 10%,respectively, and the ten point height of microcosmic unflatness values reduced by 1.5%, 0.5%,and 1.3%, respectively. These results verified the satisfactory lubrication effects of nanoparticle MQL. MoS₂, carbon nanotube（CNT）, and ZrO₂ nanoparticles were also added in the grinding fluid of nanoparticle jet MQL to analyze their grinding surface lubrication effects. The specific grinding energy of MoS₂ nanoparticle was only 32.7 J/mm³, which was 8.22% and 10.39% lower than those of the other two nanoparticles. Moreover, the surface roughness of workpiece was also smaller with MoS₂ nanoparticle, which indicated its remarkable lubrication effects. Furthermore,the role of MoS₂ particles in the grinding surface lubrication at different nanoparticle volume concentrations was analyzed. MoS₂ volume concentrations of 1%, 2%, and 3% were used.Experimental results revealed that the specific grinding energy and the workpiece surface roughness initially increased and then decreased as MoS₂ nanoparticle volume concentration increased.Satisfactory grinding surface lubrication effects were obtained with 2% MoS₂ nanoparticle volume concentration.     

CZ2F火箭POGO振动信号特征频率提取

CZ2F运载火箭在第5次飞行过程中意外出现了"8Hz"POGO振动现象,该振动频率对箭体的稳定性和航天员安全产生了严重的影响。为解决这一振动问题,必须精确分析该频率的持续时间和振动量级。通过研究HHT(Hilbert-Huang Transform,希尔伯特-黄变换)方法,结合火箭振动信号特点设计了特征频率提取算法,成功地提取了CZ2F火箭飞行中的"8Hz"POGO振动频率,为有效解决"8 Hz"POGO振动问题提供了技术支撑。     

高超声速风洞多天平测力试验技术研究

在同一次试验中通过安装多台天平测量多个部件气动力,可以更加详细地了解飞行器的气动特性,并可以降低试验成本、提高试验效率。多天平测力技术在亚跨超声速风洞中应用已经非常成熟。但是,在高超声速风洞中,由于模型尺寸小、来流温度高,多天平的布局比较困难,所以目前国内在高超声速风洞中进行的多天平测力试验相对较少。为满足型号研制的需要,在 CARDC 超高速所的Φ1m 高超声速风洞上开展了多天平测力试验技术研究。选取某飞行器的3个控制舵为研究对象。针对试验模型径向尺寸小,而轴向尺寸相对较大的特点,确定采用铰链力矩天平轴线与测量舵转轴互相垂直的“纵轴式”布局方式;采用合理的小型化六分量天平结构形式,升降舵天平测量元件的长、宽、高尺寸为20mm×20mm×25mm;为更加真实地模拟天平的工作状态,设计了专用的加载头,并采用单元加载和组合加载相结合的方法进行校准,校准结果表明,天平主要分量的静校准度均在0．7％以内;在采取温度补偿措施之后,零点漂移明显减小;采用了天平-舵偏角变换装置一体化设计,有效提高了定位和安装精度。在Φ1m 高超声速风洞上开展的 Ma＝5条件下的风洞试验结果表明,采用的多天平测力试验技术是可行的,可以应用到高超声速风洞测力试验中。     

嫦娥三号着陆器统计定位精度分析

“嫦娥三号”将在月球放置着陆器,实现月面软着陆,因此,需要对着陆器进行精确定位.本文简述了月球着陆器的统计定位方法与协方差分析理论,分析了影响统计定位精度的主要误差源.基于现有测控条件,从跟踪弧段和测量数据组合2个方面,对“嫦娥三号”着陆器的定位精度进行了分析.针对短弧条件下单站测距数据定位不稳键的问题,提出了结合月面高程约束的定位方法.协方差分析结果表明：高程数据的使用可以实现单站30 min测距优于1 km的定位精度;当观测数据累积至3d时,单站测量与VLBI（Very Long Baseline Interferometry,甚长基线干涉测量）的不同组合可以实现同等量级、优于百m的定位精度;测量系统差是制约定位精度的主要因素,完全标校测量的系统偏差则能实现10 m左右的定位精度.     

基于我国深空站三向测量模式的数据精度分析

为了验证我国深空站三向测量模式的正确性,以同步星跟踪试验中的测量数据为基础,建立了站间同步修正算法和三向测量观测模型,通过与同步卫星的精密星历反算测量值比较,得到了测量数据的标定参数,结果表明,我国深空站测控能够实现dm级的测量精度,明显优于“嫦娥二号”测量的水平;同时利用测量数据进行定轨策略分析,最终实现了10 m量级的同步卫星定轨精度.分析结果为“嫦娥三号”探测器实施有效测控提供了依据.     

无线电高度表信号模拟器射频信号延时/衰减模块设计

无线电高度表程控信号模拟器是无线电高度表自动测试系统（ATE,ATS）的重要组成部分,而射频信号延时/衰减模块则是无线电高度表程控信号模拟器3个功能模块组件中的核心模块。研制了一种采用声表面波（SAW）延迟线作为射频信号延时器件、射频衰减器作为射频信号功率衰减器件,通过程控射频开关控制不同声表面波延迟线的切换,包含射频信号变频、放大等结构电路的无线电高度表信号模拟器射频信号延时/衰减模块。经无线电高度表自动测试系统的实际工程应用表明,该无线电高度表射频信号延时/衰减模块对C波段（4.2～4.4 GHz）射频调制信号的延时精度高、衰减范围大,体小、质轻,适合置于无线电高度表测试适配器内部使用,具有较高的工程应用价值。     

大型齿轮在多因素耦合影响下齿形误差测量的灰色动态预报

提出了一种旁置式的大型齿轮测量装置,分析了影响该装置测量精度的主要误差来源及其特性,给出了一种处理多因素耦合影响的灰色动态预报方法.首先,基于测量装置特性,对影响齿形误差测量精度的误差源进行分析和标定,计算出各误差源的灵敏度系数;然后对测得的有限误差数据进行再抽样及灰色生成,分别计算出在每次测量中各影响因素对测量结果的作用大小,之后按照误差合成方法生成误差源耦合作用结果;最后,通过在测量结果中去除耦合作用进而提高大型齿轮齿形误差测量精度.与测量精度为0.5μm的三坐标测量机进行对比测量,结果表明所提出测量装置能满足3级精度以上的大型齿轮齿形误差检测需求.