Ferrofluid moving thin films for active flow control

Ferrofluid moving thin films and their possible significance with regard to active flow control for lift and attack angle enhancement are discussed. In this strategy, a very thin film of ferrofluid is strongly attached at the wall of the wing by a normal magnetic field from below and pumped tangentially along the wing. Utilizing a simplified physical model and from the available experimental data on moving walls, the expected lift enhancement and effect on the attack angle were assessed. Additional research and design is required in order to explore the possibilities in the use of ferrofluid moving thin films.     

树脂η*和Tg对C/E预浸料黏性的表征

针对复合材料预浸料工艺性缺少可量化表征方法的现状,研究了4种C/E预浸料的黏性及其环氧树脂体系的物理特性。发现预浸料黏性可以通过环氧树脂体系动态复数黏度η*和T_g两个物理量表征,环氧树脂的η*=35 kPa·s附近,T_g=0℃附近预浸料黏性较为合适。     

Analysis on capabilities of density-based solvers within OpenFOAM to distinguish aerothermal variables in difusion boundary layer

Open source feld operation and manipulation（OpenFOAM）is one of the most prevalent open source computational fluid dynamics（CFD）software.It is very convenient for researchers to develop their own codes based on the class library toolbox within OpenFOAM.In recent years,several density-based solvers within OpenFOAM for supersonic/hypersonic compressible flow are coming up.Although the capabilities of these solvers to capture shock wave have already been verifed by some researchers,these solvers still need to be validated comprehensively as commercial CFD software.In boundary layer where diffusion is the dominant transportation manner,the convective discrete schemes＇capability to capture aerothermal variables,such as temperature and heat flux,is different from each other due to their own numerical dissipative characteristics and from viewpoint of this capability,these compressible solvers within OpenFOAM can be validated further.In this paper,frstly,the organizational architecture of density-based solvers within OpenFOAM is analyzed.Then,from the viewpoint of the capability to capture aerothermal variables,the numerical results of several typical geometrical felds predicted by these solvers are compared with both the outcome obtained from the commercial software Fastran and the experimental data.During the computing process,the Roe,AUSM＋（Advection Upstream Splitting Method）,and HLLC（Harten-Lax-van Leer-Contact）convective discrete schemes of which the spatial accuracy is 1st and 2nd order are utilized,respectively.The compared results show that the aerothermal variables are in agreement with results generated by Fastran and the experimental data even if the1st order spatial precision is implemented.Overall,the accuracy of these density-based solvers can meet the requirement of engineering and scientifc problems to capture aerothermal variables in diffusion boundary layer.     

多功能大气探测激光雷达应用

激光雷达具有高的时间和空间分辨率、优越的方向性和相干性、高的探测精度和实时快速的数据获取能力，已经被广泛应用于大气探测、环境监测等领域。随着技术的发展，大气探测激光雷达由最初的单波长、单功能朝着多波长、多功能方向发展，技术更加成熟，操作更加方便。本文将介绍大气探测激光雷达的基本原理，及其在探测大气气溶胶和云、水汽、温度、污染物和大气边界层高度等方面的数据应用。最后，对多波长多功能大气探测激光雷达的数据应用发展进行了总结和展望。     

大幅运动复杂构形扑翼动态网格生成的一种新方法

 基于Delaunay图映射的动态网格生成方法无需迭代计算,效率高,稳定性好。但对大幅运动复杂构形的动边界问题,背景图容易交叉,重新生成背景图和重新定位网格点信息不仅费时而且会导致网格质量的严重下降。提出一种双重Delaunay图映射的动网格生成方法,通过在初始背景图中添加辅助点,生成虚实两种背景图和虚实两种映射关系。分别根据虚映射关系和虚背景图、实映射关系和实背景图,移动辅助点和网格点。几个复杂构形的扑翼算例表明,双重图映射方法多付出极少的内存代价即可避免背景图交叉引起的问题,提高了动网格生成的效率和质量,增强了处理大变形复杂动边界问题的强健性。     

Solar flux effects on equatorial ionization anomaly and total electron content over Brazil: Observational results versus IRI representations

The F layer critical frequency (foF2) as measured by Digisondes in the equatorial and low latitude locations in Brazil is analyzed to investigate the seasonal and solar flux controls of the intensity of the equatorial ionization anomaly (EIA) in the equinoctial month of March. The analysis also included the total electron content (TEC) as measured by a GPS receiver operated at the EIA crest location. The foF2 data set covered a period of large solar flux variation from 1996 to 2003, while the GPS TEC data was for a period in 2002–2003 when the solar flux parameter F10.7 underwent large variations, permitting in both cases an examination of the solar flux effects on these parameters. The seasonal variation pattern in TEC shows a maximum in equinoctial months and a minimum in June solstice, with similar variations for foF2. The solar flux dependence of the TEC is a maximum during equinoxes, especially for post-sunset TEC values at times when the latitudinal distribution is controlled by the equatorial evening plasma fountain processes. Significant variations with local time are found in the degree of solar flux dependence for both the TEC and EIA. The EIA intensity shows large dependence on F10.7 during post-sunset to midnight hours. These results are discussed in comparison with their corresponding IRI representations.     

使用GAO-YONG模型对不可压圆管湍流的计算

基于有限体积法思想运用SIMPLER方法PLS格式求解轴对称柱坐标系下的GAO-YONG方程组,对管流边界层以及圆管湍流的自然转捩过程进行数值模拟。结果表明,方程不仅对于边界层流动的内层壁面律和外层亏损律能作出良好的预测,而且能够预报层流-湍流转捩过程中摩阻系数和速度型的变化。      

私营企业的制度适用边界分析

私营企业是否应该尽快“走出家族制”,实行“公司化”改造,建立现代企业制度,是由企业既定的制度安排决定的。而企业制度本身并无优劣之分,只有适应与否之别。为此,对决定私营企业制度适用边界的主要变量进行分析具有十分重要的意义。文章认为,私营企业家族制度是一种外延广、适应性强的企业制度,所以,应避免把家族制度看成单一的、静态的、落后的企业制度。对我国大多数私营企业而言,私营企业家族制度仍处在其发展的有效范围之内,不应盲目地进行制度转换。     

层板结构冷却有效性的研究

基于一维多孔材料内传热理论,建立层板冷却的理论模型,应用由实验获得的各种层板结构的流阻和换热特性,由层板两侧的压差估算通过层板的冷气流量和层板结构的冷却有效性。对影响层板冷却有效性的因素进行分析,为层板的设计起到指导作用。在相同吹风比下,双层层板要比单层层板冷却有效性高,而三层层板与双层层板之间的差别不大。通过与传统气膜冷却方式的比较,可以发现,层板冷却具有以较少的空气达到较高的冷却效果的巨大潜力。      

微细管道内流体流动的黏性耗散分析

目前,还没有实验数据和理论分析可以得出在微细管道内流体的黏性对流体流动及换热的影响,而在微细管道(微米级)内流体高速流动中黏性耗散是不能够忽略的,但是没有合理的计算公式进行理论计算。因此,这里对粘性耗散在微细管道流中的影响进行了分析和理论验证。根据已有的分析给定了一个粘性耗散在微细管道流中造成明显影响的最小标准值。