基于仿真分析的压铆力预测模型

铆接是飞机结构机械连接的主要方式,压铆力作为影响铆接质量的重要因素,传统的计算方法通常是建立在体积不变的假设之上,且不考虑钉杆材料被压入钉孔部分的体积,导致模型误差较大。为此,依据仿真分析结果和铆钉材料的流动趋势,引入体积缩减系数来描述钉杆被压入钉孔部分的体积,建立压铆力预测模型,并与已有的试验数据进行对比,结果表明计算值与试验值的一致性较好,该模型可以用来预测铆接过程中压铆力的大小。     

Optimization and design of an aircraft's morphing wing-tip demonstrator for drag reduction at low speeds,Part Ⅱ-Experimental validation using Infra-Red transition measurement from Wind Tunnel tests

In the present paper, an ‘in-house' genetic algorithm was numerically and experimentally validated. The genetic algorithm was applied to an optimization problem for improving the aerodynamic performances of an aircraft wing tip through upper surface morphing. The optimization was performed for 16 flight cases expressed in terms of various combinations of speeds, angles of attack and aileron deflections. The displacements resulted from the optimization were used during the wind tunnel tests of the wing tip demonstrator for the actuators control to change the upper surface shape of the wing. The results of the optimization of the flow behavior for the airfoil morphing upper-surface problem were validated with wind tunnel experimental transition results obtained with infra-red Thermography on the wing-tip demonstrator. The validation proved that the 2D numerical optimization using the ‘in-house' genetic algorithm was an appropriate tool in improving various aspects of a wing's aerodynamic performances.     

Aerodynamic multi-objective integrated optimization based on principal component analysis

Based on improved multi-objective particle swarm optimization (MOPSO) algorithm with principal component analysis (PCA) methodology,an efficient high-dimension multiobjective optimization method is proposed,which,as the purpose of this paper,aims to improve the convergence of Pareto front in multi-objective optimization design.The mathematical efficiency,the physical reasonableness and the reliability in dealing with redundant objectives of PCA are verified by typical DTLZ5 test function and multi-objective correlation analysis of supercritical airfoil,and the proposed method is integrated into aircraft multi-disciplinary design (AMDEsign) platform,which contains aerodynamics,stealth and structure weight analysis and optimization module.Then the proposed method is used for the multi-point integrated aerodynamic optimization of a wide-body passenger aircraft,in which the redundant objectives identified by PCA are transformed to optimization constraints,and several design methods are compared.The design results illustrate that the strategy used in this paper is sufficient and multi-point design requirements of the passenger aircraft are reached.The visualization level of non-dominant Pareto set is improved by effectively reducing the dimension without losing the primary feature of the problem.     

发动机短舱溢流阻力的数值模拟

 为分析发动机溢流阻力的产生原因并为进气道-发动机匹配研究提供一定的技术支持,以典型的发动机短舱为研究对象,分析了短舱上的进气道阻力,并详细介绍了相应溢流阻力的数值计算方法。在对发动机短舱外流模拟时,通过引入两个和发动机参数相关的数值边界条件,即一个是定流量的发动机进气道入流边界,另一个是定总温总压的发动机喷流边界,避免了对发动机复杂内流的模拟。利用NACA-1-81-100发动机进气道作为标准算例,验证了数值方法的可行性。通过模拟发动机短舱在不同工作流量下的流动,认为发动机短舱的溢流阻力产生归因为溢流造成的发动机外表面的阻力变化,以及捕获流管变细导致的附加阻力增加。     

失速改出伞阻力特征面积估算方法

研究了高平尾布局飞机的气动特性。使用失速改出伞是飞机改出深失速的重要途径,但如何确定失速改出伞的关键参数(阻力面积等)却没有现成的方法。以ARJ21-700飞机为例,分别使用公式分析法、类比法综合估算出失速改出伞的关键参数,通过模型自由飞和模拟仿真分析验证其具有足够效能将飞机改出深失速状态。形成了一套新机失速改出伞的设计方法和关键数据图表,可供其他型号飞机失速改出伞的设计研制使用。     

一种非线性部分极曲线的试飞方法

介绍了一种不测推力获取非线性部分极曲线的试飞方法。从飞机纵向动力学方程出发,推导出了利用试飞数据计算非线性部分诱导阻力系数Ａ值的公式,在铅垂对称平面内进行了飞行试验。试验结果表明：不测推力法试飞结果同测推力法试飞结果、风洞预测值以及Ｊ７原型机资料值具有良好的一致性,不测推力法是一种经济、可靠、简便而有效的试飞方法,可用于同类型飞机的非线性曲线试飞研究。     

壁面带微结构管道内Cassie状态稳定性的实验研究

保持液体在微结构表面处于Cassie状态,是流动减阻的关键。首先利用MicroPTV分别测量了带微结构侧壁处于Cassie和Wenzel状态下的流场速度,表明Cassie状态下近壁速度提高至光滑表面的1.6倍,而Wenzel状态下近壁速度将减小。通过精细控制微管道的驱动压强,观察了液体在近壁由Cassie向Wenzel状态的转变,并测出C/W转变的临界压强值Δpcr约10.9kPa,与Laplace理论预测值10.15kPa基本相符。考虑到Cassie状态失稳也会发生在液体进样过程中,实验还观察了微结构角点对液体进样的＂锚定＂作用,并初步分析了液体进样中自由液面在微结构表面保持Cassie状态的条件。     

Real-time fault detection method based on belief rule base for aircraft navigation system

Real-time and accurate fault detection is essential to enhance the aircraft navigation system’s reliability and safety. The existent detection methods based on analytical model draws back at simultaneously detecting gradual and sudden faults. On account of this reason, we propose an online detection solution based on non-analytical model. In this article, the navigation system fault detection model is established based on belief rule base (BRB), where the system measuring residual and its changing rate are used as the inputs of BRB model and the fault detection function as the output. To overcome the drawbacks of current parameter optimization algorithms for BRB and achieve online update, a parameter recursive estimation algorithm is presented for online BRB detection model based on expectation maximization (EM) algorithm. Furthermore, the proposed method is verified by navigation experiment. Experimental results show that the proposed method is able to effectively realize online parameter evaluation in navigation system fault detection model. The output of the detection model can track the fault state very well, and the faults can be diagnosed in real time and accurately. In addition, the detection ability, especially in the probability of false detection, is superior to offline optimization method, and thus the system reliability has great improvement.     

Minimizing airfoil drag at low angles of attack with DBD-based turbulent drag reduction methods

Dielectric Barrier Discharge (DBD) based turbulent drag reduction methods are used to reduce the total drag on a NACA 0012 airfoil at low angels of attack. The interaction of DBD with turbulent boundary layer was investigated, based on which the drag reduction experiments were conducted. The results show that unidirectional steady discharge is more effective than oscillating discharge in terms of drag reduction, while steady impinging discharge fails to finish the mission (i.e. drag increase). In the best scenario, a maximum relative drag reduction as high as 64 % is achieved at the freestream velocity of 5 m/s, and a drag reduction of 13.7 % keeps existing at the freestream velocity of 20 m/s. For unidirectional discharge, the jet velocity ratio and the dimensionless actuator spacing are the two key parameters affecting the effectiveness. The drag reduction magnitude varies inversely with the dimensionless spacing, and a threshold value of the dimensionless actuator spacing of 540 (approximately five times of the low-speed streak spacing) exists, above which the drag increases. When the jet velocity ratio smaller than 0.05, marginal drag variation is observed. In contrast, when the jet velocity ratio larger than 0.05, the experimental data bifurcates, one into the drag increase zone and the other into the drag reduction zone, depending on the value of dimensionless actuator spacing. In both zones, the drag variation magnitude increases with the jet velocity ratio. The total drag reduction can be divided into the reduction in pressure drag and turbulent friction drag, as well as the increase in friction drag brought by transition promotion. The reduction in turbulent friction drag plays an important role in the total drag reduction.     

双损耗Al2O3基多孔吸波材料的制备及其吸波性能

基于片状Al₂O₃陶瓷互锁结构强度高的特点,制备出夹杂石墨的高气孔率的Al₂O₃多孔陶瓷,并通过原位还原在多孔骨架中制备出Ni微粒,形成一种轻质的双损耗陶瓷基吸波材料。通过XRD、FE-SEM和EDS研究了还原温度对多孔吸波材料的组成、微观形貌、元素分布和吸波性能的影响。结果表明,还原温度升温至700 ℃可将多孔网络中Ni完全还原,形成以堆叠互锁Al₂O₃为基,夹杂片状石墨和孔表面覆盖Ni微粒的双损耗轻质吸波材料。当复合材料厚度为6.5 mm时,最小反射损耗为-35.01 dB,有效吸收带宽达到1.75 GHz。片状Al₂O₃锁定的石墨片构筑的导电网络,Ni微粒与基体之间的极化效应等共同促进复合材料良好的微波吸收性能。