表面粗糙度对高辐射涂层发射率的影响

以氧化铁、碳化硅和氧化钴为高辐射填料,通过控制涂层浆料固含量和喷涂次数制备出了不同表
面粗糙度的高辐射涂层。用AE 辐射计测试了不同表面粗糙度高辐射涂层的室温发射率,根据GB/ T 7287—
2008 测试了涂层的800℃高温发射率,用扫描电子显微镜和光学显微镜观察了涂层表面形貌,用扫描探针显微
镜测试了涂层的表面粗糙度。结果表明,在辐射换热条件下高辐射涂层表面粗糙度在2. 75 ~225. 70 μm 变化
时,其室温发射率发生了0. 02 ~ 0. 05 的变化。而在导热换热条件下高辐射涂层表面粗糙度在2. 75 ~ 36. 99
μm 变化时,其高温发射率没有变化。     

干式铣削Al-50wt%Si高硅铝合金刀具磨损与表面粗糙度评价

本文以Al-50wt%Si高硅铝合金为研究对象，采用单因素试验方法进行无涂层硬质合金刀具干式铣削试验，分析切削参数对刀具磨损和表面粗糙度的影响。结果表明：表面粗糙度受每齿进给量的影响最显著，随每齿进给量的增加而增加，当每齿进给量从0.07 mm/z增加到0.16 mm/z时，表面粗糙度增加2倍；刀具磨损受切削速度的影响最显著，随切削速度的增加而增加，当切削速度从140 m/min增加到260 m/min时，切削总长度降低3倍，而刀具后刀面磨损量仅是260 m/min速度下的0.8倍；表面粗糙度随刀具磨损的增加呈现先增加后降低的变化趋势，切削长度从350 mm增加到1 750 mm，刀具磨损量平均增加4.5倍，而表面粗糙度却下降2倍；硬质合金刀具主要的磨损形式为磨粒磨损、崩刃。     

A novel adaptive lateral reentry guidance algorithm with complex distributed no-fly zones constraints

Aimed at complex distributed no-fly zones avoidance problems, a novel adaptive lateral reentry guidance algorithm is proposed. Firstly, by introducing the improved attractive and repulsive potential fields, an improved artificial potential field method is developed. Combined with the proposed judgment criterion for whether a no-fly zone has been avoided, the proposed improved artificial potential field method effectively solves the reference heading angle determination problem under the constrai...     

Effects of surface topography and specimen thickness on high-speed raindrop impact damage of CFRP laminates

Raindrop impact erosion has been observed since early days of aviation, and can be catastrophic for exposed materials during supersonic flight. A single impact waterjet apparatus is established for mimicking drop impacts at the velocities between 350 m/s and 620 m/s. Carbon Fiber Reinforced Polymer(CFRP) laminates with three different surface morphologies and specimen thicknesses are tested here. A central region with no visible damage has been noticed, surrounded by a “failure ring” with common...