利用前缘旋转控制边条翼外翼分离

边条翼在边条较小时中等迎角以上外翼就会出现分离,现提出用转动前缘表面来控制边条翼外翼分离。通过测力、油流和烟丝实验研究了转动前缘对机翼气动特性的影响。结果表明,在这种机翼上转动前缘对控制分离是有效的,升力增量最大可达３０％。可以预期,转动前缘与边条的综合作用,机翼的分离特性将有较大的改善     

单晶叶片材料蠕变试验研究

针对单晶材料涡轮叶片的蠕变计算分析的需要,对我国自行设计的单晶材料DD3进行蠕变试验,根据试验结果提出了进行曲线拟合的方法,并与有限元法计算相结合,对拟合出的蠕变律常数进行了修正,提出了较好符合试验曲线的较精确的Norton蠕变律有关常数A、n和p值,满足了单晶叶片非线性有限元蠕变分析的要求.     

用CBN刀具高速切削灰铸铁的试验研究

研究了CBN刀具高速切削灰铸铁时的刀具前、后刀面磨损、耐用度以及富氧气氛对切削性能的影响,所用的灰铸铁具有不同的铁素体、珠光体比例,最高切削速度达1＇100 m/min.研究表明Amborite刀具的刀尖磨损略大于BZN6000刀具,在较低速度下加工以铁素体为主的灰铸铁时更容易发生月牙洼磨损;BZN6000刀具以700 m/min的切削速度加工铁素体含量较高的灰铸铁时耐用度较高,Amborite刀具的耐用度随切削速度而升高;在富氧气氛中切削可以减轻刀具磨损,这一效果对BZN6000刀具更为显著.文章中对这些现象的原因进行了讨论.     

S-08钢真空熔模精密铸造工艺研究

通过工艺试验和系统分析,研究出一套用真空感应铸造炉生产S-08钢铸件的工艺方法,解决S—08钢真空熔模精密铸造过程中的关键工艺技术问题,使S-08钢铸造的液氧／煤油发动机低压壳体、氧主阀下壳体等关键铸件满足高压、高冲击的负荷指标。     

双馈异步风力发电机气隙偏心故障诊断研究现状与发展

双馈异步风力发电机(DFIG)机械故障在实际运行中尤其不可忽略,不论是转子刚度不足还是轴承磨损或安装误差,都会导致气隙偏心,严重时甚至会烧毁电机,因此对风机进行准确高效的气隙偏心故障诊断至关重要。简单介绍DFIG产生气隙偏心的故障机理,再对当前已有的相关故障诊断方法做重点归类阐述,最后展望未来的DFIG气隙偏心故障诊断方法的发展趋势和方向。     

平面叶栅尾流板开孔率对跨声速涡轮叶栅流道影响的数值分析

跨声速平面叶栅风洞中通常通过尾流板来改善平面叶栅周期性,针对尾流板的设计需求,利用数值模拟的方法,研究了尾流板在15%、30%、50%开孔率下对实验叶栅的影响。数值分析结果表明:叶栅尾缘激波在自由边界上反射后,返回到叶栅通道中,破坏了叶栅通道的周期性;开槽尾流板减少了反射波对叶栅通道的影响,减弱叶栅尾缘激波的反射波强度,在某特定情况下能使反射波变成膨胀波,从而提高了叶栅通道周期性;尾流板开孔率为15%时能极大地改善平面叶栅通道的周期性,相对于开孔率为50%时叶栅的周期性误差降低约16.43%。      

Spectroscopic data and Stark broadening of Cu I and Ag I spectral lines: Selection and analysis

Optical emission and linear laser absorption spectroscopy techniques were used in investigation of plasma with copper and silver admixture. The method of selection of spectral lines and spectroscopic data with the aim of diagnostics of multicomponent air plasma with two metal vapors admixture was developed. Energy level populations behavior on the Boltzmann plot were used for Cu I and Ag I spectroscopic data selection. In this way the selection of spectroscopic data for some of Cu I and Ag I lines was realized. Stark broadening parameters of Cu I and Ag I were examined. Experimentally obtained temperature and electron density radial distributions were used in the calculation of plasma composition in the assumption of local thermodynamic equilibrium. Linear laser absorption spectroscopy was used to examine the state of plasma.     

空间真空环境下密封电磁继电器的触点失效研究

密封电磁继电器有其固有的漏率,在应用于空间真空环境下由于气体泄漏使得其内部气体压力逐渐降低,导致继电器的触点在低气压环境下工作失效（负载切换时）。文章选择国产继电器样品对上述机理进行了试验验证,并对继电器内部气体压力与触点电弧失效的规律进行了研究。     

Investigation on Thermal Contact Conductance Based on Data Analysis Method of Reliability

The method of reliability is proposed for the investigation of thermal contact conductance (TCC) in this study. A new definition is introduced, namely reliability thermal contact conductance (RTCC), which is defined as the TCC value that meets the reliability design requirement of the structural materials under consideration. An experimental apparatus with the compensation heater to test the TCC is introduced here. A practical engineering example is utilized to demonstrate the applicability of the proposed approach. By using a statistical regression model along with experimental data obtained from the interfaces of the structural materials GH4169 and K417 used in aero-engine, the estimate values and the confidence level of TCC and RTCC values are studied and compared. The results show that the testing values of TCC increase with interface pressure and the proposed RTCC model matches the test results better at high interface pressure.     

Effects of wing flexibility on aerodynamic performance of an aircraft model

The low-speed wind tunnel experiment is carried out on a simplified aircraft model to explore the influence of wing flexibility on the aircraft aerodynamic performance. The investigation involves the measurements of force, membrane deformation and velocity field at Reynolds number of 5.4 × 10⁴–1.1 × 10⁵. In the lift curves, two peaks are observed. The first peak, corresponding to the stall, is sensitive to the wing flexibility much more than the second peak, which nearly keeps constant. For the optimal case, in comparison with the rigid wing model, the delayed stall of nearly 5° is achieved, and the relative lift increment is about 90%. It is revealed that the lift enhanced region corresponds to the larger deformation and stronger vibration, which leads to stronger flow mixing near the flexible wing surface. Thereby, the leading-edge separation is suppressed, and the aerodynamic performance is improved significantly. Furthermore, the effects of sweep angle and Reynolds number on the aerodynamic characteristics of flexible wing are also presented.