Nanofillers modification of Epocast 50-A1/946 epoxy for bonded joints

Epocast 50-A1/946 epoxy was primarily developed for joining and repairing of composite aircraft structural components. The objective of the present work is to modify the Epocast epoxy resin by different nanofillers infusion. The used nanofillers include multi-walled carbon nanotubes（MWCNTs）, SiC and Al2O3 nanoparticles. The nanofillers with different weight percentages are ultrasonically dispersed in the epoxy resin. The sonication time and amplitude for MWCNTs are reduced compared to Al2O3 and SiC nanoparticles to avoid the damage of MWCNTs during sonication processes. The fabricated neat epoxy and twelve nanocomposite panels were characterized via standard tension and in-plane shear tests. The experimental results show that the nanocomposites materials with 0.5wt% MWCNTs, 1.5wt% SiC and 1.5wt% Al2O3 nanoparticles have the highest improvement in the tensile properties compared to the other nanofiller loading percentages.The improvements in the shear properties of these nanocomposite materials were respectively equal to 5.5%, 4.9%, and 6.3% for shear strengths, and 10.3%, 16.0%, and 8.1% for shear moduli. The optimum nanofiller loading percentages will be used in the following papers concerning their effect on the bonded joints/repairs of carbon fiber reinforced composites.     

超视距舰空导弹爬升段弹道设计

针对超视距舰空导弹中制导的爬升段,采取两段程序圆弧相结合的方法设计弹道,给出了导弹爬升段的高度与倾角指令,并对于在圆弧间及弧与高空平飞段两转接点处出现的抖动现象,通过改变转接基准并做必需的导引指令修正,有效地解决了抖动问题。最后的仿真结果验证了所设计导引律的可行性和对于消除抖动问题所做措施的有效性。     

超声速叶型前缘几何形状对叶栅气动性能的影响

应用NURBS技术构造超声速叶型,采用两个控制参数调整叶栅前缘椭圆弧的几何形状,来探索不同的前缘构型对超声速叶型气动性能的影响效应;通过对比分析调整每个参数所得的一系列叶栅的流场计算结果,发现椭圆弧的形状控制因子对超声速叶栅的前缘激波和气流流动状况具有一定的改善效果,同时在保证叶栅气动弦长基本不变的情况下,存在某个椭圆弧形状控制因子和方向控制因子的匹配能够使叶栅的气动性能达到最佳.     

模型烧蚀对尾迹电子特性影响的计算和实验研究

 基于气动物理研究的需要,针对高焓风洞的来流特点,采用计算和实验相结合的方法研究聚丙烯烧蚀对尾迹电子密度的影响。结果表明：计算结果可以有效模拟实验状态,电子密度的模拟精度有很大提高,误差在一个量级内;聚丙烯烧蚀可以降低尾迹的电子密度,但幅度不大,在2倍左右,其与选择模型材料的催化特性降低幅度相当;对电弧风洞的成功改进和非稀薄流静电探针诊断技术的应用,是尾迹电子密度测试的前提保障。     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

空间辐射环境单粒子效应研究

文章介绍了空间辐射环境对航天器电子元器件产生的单粒子效应的国内外研究情况,从环境模拟方法、模拟试验设备、单粒子效应及防护以及飞行试验等方面进行了分析比较。文章对国内研究发展提出了一些建设性的建议。     

核热推进地面试验技术研究

核热推进具有比冲高、推力大等特点,在载人深空探测和星际货运任务上具有广阔应用前景。核热推进技术的研发需要进行大量地面试验。首先回顾了美国与俄罗斯的核热推进地面试验技术的发展,对地面试验技术进行分类总结。然后基于一种小型核火箭方案,研究了燃料元件非核试验、燃料元件辐照考验试验和带核整机地面试验等关键地面试验技术,并提出了初步试验方案。最后对我国核热推进地面试验的发展提出了一些建议。     

基于室内无线模型的穿墙损耗校正

K-M（Keenan-Motley）模型将单墙固定损耗值相加来计算室内无线信号穿透多墙的总损耗值,存在较大误差。针对该问题选取多种室内场景分别进行连续波（Continuous Wave,CW）测试,对无线信号穿墙损耗的影响因素和变化规律进行分析,提出了一种基于人工神经网络的室内无线模型穿墙损耗校正方法,对预处理后的测试数据进行训练并建立预测模型。经验证该预测模型符合校正判别准则,在实际场景下具有良好的预测准确度。     

燃烧室头部激励的等离子体强化燃烧特性实验研究

等离子体助燃是一种新型的强化燃烧技术,近年来受到国内外学者的广泛关注。本文开创性地研制了基于旋转滑动弧等离子体的强化燃烧头部,建立了某型航空发动机三头部燃烧室实验件的等离子体助燃实验平台,验证了该等离子体强化燃烧技术应用于型号发动机燃烧室的可行性。实验研究等离子体助燃在不同余气系数和不同输入电压条件下对平均出口温度、燃烧效率、温度分布系数以及熄火边界的影响。实验结果表明,与正常燃烧相比,施加等离子体助燃后的燃烧效率有明显的提高,在输入电压为U0=240V,余气系数为 α=0.8时,等离子体助燃的燃烧效率提高3.24%。实施等离子体助燃后,燃烧室出口温度分布场分布得到明显的改善,在富油工况α=0.8,出口温度分布系数减少39.8%。等离子体助燃输入电压越高熄火边界扩展程度越明显,相比于正常工况条件下,等离子体助燃U0=240V的熄火边界扩宽了7.34%。     

高升力多段翼型洞壁干扰修正

 Erisson对高升力多段翼型的洞壁干扰问题进行过理论计算。Moury和Labrujère对上述问题也进行过一些研究,可惜Moury的实验是在开闭比为20％的开孔壁风洞中进行的,而Labrujère仅给出个别情况的实验结果,且其测压点较多,计算较繁,不易实时处理。