小卫星非常规动力学分析与控制

针对小卫星研制中出现的一些非常规动力学问题进行研究,并提出解决办法。针对小卫星组件最大冲击谱量级超出常规冲击试验规范谱的分析与验证困难,通过研究提出了能够分析评估组件高量级冲击的方法。针对小卫星随机振动下强度设计方法还存在较大误差,分析了系统模态质量比与模态频率在一定频段的影响规律,认为忽略模态质量耦合会带来误差,提出了考虑模态质量耦合的准静态载荷计算方法。最后,针对小卫星整星开展了减振研究,分析了正弦和随机减振效果,对于对称安装减振系统,提出了减振系统的主频率计算公式。     

飞机燃油质量特性计算及供油顺序的设计

采用将油箱分割成多单元斜六面体的方法解决了外形复杂油箱的描述问题;采用切片法计算燃油质量特性,方法本身考虑了飞机姿态角对燃油形状的影响。解决了在给定重心活动范围情况下供油顺序设计问题。算例证明本方法具有很高的精确度和应用价值。     

混杂复合材料层合板抗冲击性能研究

为了探究复合材料层合板在实际应用中因承受冲击载荷而造成的结构安全问题,本研究采用实验和仿真相结合的方法,首先探究冲头形状对复合材料层合板损伤机理的影响,然后结合不同冲击能进一步揭示层合板的承载力和能量吸收变化规律。结果表明,相同冲击能下,层合板的损伤范围和承载力随着圆锥头、半球头、平头依次增加;相应的层合板的临界穿透能量随着圆锥头、半球头、平头依次增大;冲头形状和冲击能对层合板的吸能能力有较大的影响。     

旋转固体火箭发动机随质量变化的姿态运动分析

旋转固体火箭发动机是否稳定主要取决于其微小的侧向角速度是否被耗散或被放大。就发动机内部随燃烧而质量发生变化,且使飞行器整体质心前移的圆柱形装药结构进行姿态动力学分析,得到在几种典型装药形式下侧向角速度随时间的变化情况。结果指出,质量的减小对飞行角速度的变化是有影响的,由于误差等因素所引入的初始侧向角速度也会被逐渐耗散掉。此外,在某些装药形式及燃烧方式下,其侧向角速度在燃烧过程中会以指数规律增加,通过对计算结果的分析,提出了对发动机设计的稳定性要求。     

利用视加速度补偿和推力逐级释放的垂直着陆制导方法

针对运载火箭子级垂直返回着陆段的制导问题,本文在应用凸优化的滚动时域在线规划基础上研究了制导鲁棒性的改善策略。为应对着陆后期控制能力不足的情况,在滚动规划过程中引入了推力上界逐级释放的策略。同时,考虑缓解干扰和误差累积的影响,在制导周期内引入视加速度信息对在线规划的推力指令进行补偿,以进一步改善滚动规划的递归可行性。最后,通过数值算例仿真及对比分析验证所提出的补偿策略的有效性。     

Near-infrared study of open clusters Teutsch 10 and Teutsch 25

The astrophysical parameters have been estimated for two unstudied open star clusters Teutsch 10 and Teutsch 25 using the Two Micron All Sky Survey ($2\mathit{MASS}$) database. Radius is estimated as 4.5 arcmin for both clusters using radial density profiles. We have estimated proper motion values in both RA and DEC directions as $2.28\pm 0.3$ and $-0.38\pm 0.11$?mas?yr^?1 for Teutsch 10 and $0.48\pm 0.3$ and $3.35\pm 0.16$?mas?yr^?1 for Teutsch 25 using $\mathit{PPMXL}$¹ catalog. By estimating the stellar membership probabilities, we have identified 30 and 28 most likely members for Teutsch 10 and Teutsch 25 respectively. We have estimated the reddening as $E(B-V)=0.96\pm 0.3$?mag for Teutsch 10 and $0.58\pm 0.2$?mag for Teutsch 25, while the corresponding distances are $2.4\pm 0.2$ and $1.9\pm 0.1$?kpc. Ages of $70\pm 10$?Myr for Teutsch 10 and $900\pm 100$?Myr for Teutsch 25 are estimated using the theoretical isochrones of metallicity Z?=?0.019. The mass function slopes are derived as $1.23\pm 0.30$ and $1.09\pm 0.35$ for Teutsch 10 and Teutsch 25 respectively. Estimated mass function slope for both the clusters are close to the Salpeter value ($x=1.35$) within the errors. Estimated values of dynamical relaxation time are found to be less than cluster’s age for these objects. This concludes that both objects are dynamically relaxed. The possible reason for relaxation may be due to dynamical evolution or imprint of star formation or both.     

地面燃气轮机单管燃烧室流量分配试验

对设计的100kW地面燃气轮机单管燃烧室空气流量分配进行了试验研究。在常压环境下采用堵孔法分别得到了旋流器、主燃孔和掺混孔的流量特性曲线,分析得到燃烧室不同结构的流量系数;试验研究了不同进口流量条件下燃烧室的流量分配,测量得到了燃烧室总压损失。研究发现:随着进口空气流量的增加,燃烧室的流量分配比例基本保持稳定,并且与燃烧室的设计空气比例基本吻合;随着燃烧室进口流量（雷诺数）的增加,旋流器、主燃孔和掺混孔的流量系数呈线性降低;随着进口流量（雷诺数）的增加,燃烧室总压损失逐渐增大;对主燃孔和掺混孔的流量特性测量中,两种测量方法得到的试验结果稍有差别,总体上看两种测量方法的试验结果较为接近。通过对比分析证明两种试验测量方法真实可靠,该研究结果可为100kW地面燃气轮机燃烧室的设计与优化提供依据。      

液体推进燃料着火特性影响因子与活化能分析

采用反射激波管实验台,对液体推进燃料RP-3着火特性进行了实验研究,并分析了燃料的表观活化能。采用了最大OH-光谱斜率倒推法确定着火终点,判定得到了液体推进燃料的着火特性,并对不同燃料体积分数下的着火延迟进行了归一化处理。结果表明:推进燃料的表观活化能差异不大,约为154～171kJ/mol;对各参数影响因子进行分析,着火延迟时间与当量比成正比关系,与燃料体积分数和混合气压力成反比关系;与JP-10比较发现,着火特性数据受燃料体积分数、当量比的影响因子几乎相等。      

用于空间探测飞行时间质谱仪的真空系统和取样系统设计

文章介绍了可用于空间探测飞行时间质谱仪的真空系统和取样系统设计,并建立了该TOFMS原理样机的地面试验系统。为适应空间探测和地面试验2种不同工作模式,设计了2套不同的真空系统。根据文章建立的气体样本进样的理论分析模型进行理论分析计算,并通过地面适应性试验测定了质谱室的真空度、空气的Voltage-Amu谱图、Kr样本Voltage-Amu谱图及进样时间。试验结果表明:真空系统和取样系统设计合理,能够满足试验需求;理论分析模型正确,能够用于指导试验。     

Recent active thermal management technologies for the development of energy-optimized aerospace vehicles in China

Recently, the development of modern vehicles has brought about aggressive integration and miniaturization of on-board electrical and electronic devices. It will lead to exponential growth in both the overall waste heat and heat flux to be dissipated to maintain the devices within a safe temperature range. However, both the total heat sinks aboard and the cooling capacity of currently utilized thermal control strategy are severely limited, which threatens the lifetime of the on-board equipment and even the entire flight system and shrink the vehicle’s flight time and range. Facing these thermal challenges, the USA proposed the program of “INVENT” to maximize utilities of the available heat sinks and enhance the cooling ability of thermal control strategies. Following the efforts done by the USA researchers, scientists in China fought their ways to develop thermal management technologies for Chinese advanced energy-optimized airplanes and spacecraft. This paper elaborates the available on-board heat sinks and aerospace thermal management systems using both active and passive technologies not confined to the technology in China. Subsequently, active thermal management technologies in China including fuel thermal management system, environment control system, non-fuel liquid cooling strategy are reviewed. At last, space thermal control technologies used in Chinese Space Station and Chang’e-3 and to be used in Chang’e-5 are introduced. Key issues to be solved are also identified, which could facilitate the development of aerospace thermal control techniques across the world.