Numerical prediction and wind tunnel experiment for a pitching unmanned combat air vehicle

The low-speed flowfield for a generic unmanned combat air vehicle (UCAV) is investigated both experimentally and numerically. A wind tunnel experiment was conducted with the Boeing 1301 UCAV at a variety of angles of attack up to 70 degrees, both statically and with various frequencies of pitch oscillation (0.5, 1.0, and 2.0 Hz). In addition, pitching was performed about three longitudinal locations on the configuration (the nose, 35% MAC, and the tail). Solutions to the unsteady, laminar, compressible Navier–Stokes equations were obtained on an unstructured mesh to match results from the static and dynamic experiments. The computational results are compared with experimental results for both static and pitching cases. Details about the flowfield, including vortex formation and interaction, are shown and discussed, including the non-linear aerodynamic characteristics of the vehicle.     

飞机碱性电瓶最佳充电方式研究及其实现

应用电瓶最佳受电原理，对常用飞机碱性电瓶的充电方式进行了分析和比较，提出了脉冲恒流二阶段充电法是电瓶的最佳充电方法之一的设想，其可行性已被试验证实。利用该充电方法，研制成了飞机碱性电瓶专用充电器．实验结果表明该充电方法能大大提高电瓶的充电效率，延长电瓶的使用寿命。     

增升状态下的全机位流数值模拟

研究了势流理论下的全机增升装置复杂外形气动力数值计算方法,该方法以低阶面元法为基础,具有计算量小、速度快的优点.复杂流动的粘性效应主要通过附面层粘性修正技术加以体现.采用该方法对某增升装置翼身组合体外形压力分布特性进行计算,并和风洞实验数据相比较,验证了方法的正确性和实用性.在此基础上对某型飞机真实复杂外形的压力分布特性进行了计算,为复杂外形飞行器增升装置的初步设计、方案选型与评估提供了非常理想的工程技术手段.     

基于Kriging模型插值的孔位修正策略

飞机装配时的孔位精度直接影响其最终装配质量，而待制孔零件易发生变形和整体偏移，因此一般通过基准孔信息对待制孔位进行补偿。提出一种基于Kriging插值的孔位修正方法，通过基准孔建立孔位理论坐标与实际偏差值的Kriging模型，进而预测待制孔的孔位偏差，并给出每个位置的预测标准误差，以指导基准孔的增添和布置。最后通过有限元和数值实验分别验证了零件在极限变形和整体平移旋转情况下该方法的有效性，实现了孔位估计误差小于0.3 mm。     

C919飞机全机静力试验技术

介绍了C919大型客机全机静力试验的目的及任务需求，分析了试验特点和难点。从试验飞机支持、试验加载及控制、试验测量及监控、损伤检测及状态监测等方面制定了总体技术实现方案，验证结果表明试验系统可靠，技术实现方案满足任务要求。试验中采用了多项创新技术：试验综合加载平台设计技术优化了多系统集成，加快了试验准备速度，降低了试验准备风险；约束点误差转移控制技术将约束部位误差转移至非重点考核部位，提高了关键考核区域试验精度；机身双层地板双向加载技术优化了机身加载及扣重设计，改善了局部载荷的加载精度。技术成果为后续型号试验提供了较高参考价值。     

Robust adaptive fault-tolerant control of a tandem coaxial ducted fan aircraft with actuator saturation

This paper is concerned with the robust adaptive fault-tolerant control of a tandem coaxial ducted fan aircraft under system uncertainty, mismatched disturbance, and actuator saturation. For the proposed aircraft, comprehensive controllability analysis is performed to evaluate the controllability of each state as well as the margin to reject mismatched disturbance without any knowledge of the controller. Mismatched disturbance attenuation is ensured through a structured H-infinity controller tuned by a non-smooth optimization algorithm. Embedded with the H-infinity controller, an adaptive control law is proposed in order to mitigate matched system uncertainty and actuator fault. Input saturation is also considered by the modified reference model. Numerical simulation of the novel ducted fan aircraft is provided to illustrate the effectiveness of the proposed method. The simulation results reveal that the proposed adaptive controller achieves better transient response and more robust performance than classic Model Reference Adaptive Control (MRAC) method, even with serious actuator saturation.     

Numerical study on flow fields and aerodynamics of tilt rotor aircraft in conversion mode based on embedded grid and actuator model

A method combining rotor actuator disk model and embedded grid technique is presented in this paper, aimed at predicting the flow fields and aerodynamic characteristics of tilt rotor aircraft in conversion mode more efficiently and effectively. In this method, rotor's influence is considered in terms of the momentum it impacts to the fluid around it; transformation matrixes among different coordinate systems are deduced to extend actuator method's utility to conversion mode flow fields' calculation. Meanwhile, an embedded grid system is designed, in which grids generated around fuselage and actuator disk are regarded as background grid and minor grid respectively, and a new method is presented for ‘donor searching' and ‘hole cutting' during grid assembling. Based on the above methods, flow fields of tilt rotor aircraft in conversion mode are simulated, with threedimensional Navier–Stokes equations discretized by a second-order upwind finite-volume scheme and an implicit lower–upper symmetric Gauss–Seidel(LU-SGS) time-stepping scheme. Numerical results demonstrate that the proposed CFD method is very effective in simulating the conversion mode flow fields of tilt rotor aircraft.     

民用飞机维修目标与要求的指标体系研究

维修目标与要求(MORs)是为了能够并便于对产品进行维修而对航空器设计、维修和保障所提出的目标与要求,是设计、使用、维修、成本、效率等多种因素的综合权衡结果,也是维修工程学要实现的具体要求和指标。本文立足民用飞机,结合自身民机维修经验,从MORs指标确定的风险、过程、指标的分类等方面对MORs及其指标进行了研究。     

民用飞机生产线自动控制系统的信息安全问题探析

随着信息化技术越来越多地应用到工业控制系统,不可避免地也带来了各类风险和威胁,系统的信息安全问题也就越发需要引起重视。对民用飞机生产线自动化控制系统存在的安全隐患进行了探究和分析,结合其他领域的工控系统安全措施,针对本系统的一些威胁和漏洞提出了安全风险防范方案。     

浅析俄罗斯战斗机CY—37“金雕”前掠翼三翼面气动布局的先进性

本文追溯了前掠翼的飞机的渊源。指出常规二翼面的后掠翼，变后翼和近矩耦合鸭式气动布局存在着妨碍机动进一步提高的缺点。