提高航天传输型CCD相机地面像元分辨率方法研究

文章首先对空间传输型遥感相机提高像元分辨率的几种常规和非常规方法做了简介,在分析这些方法的优缺点以及以采样定理为依据分析我国现有CCD相机光学截止频率和CCD采样频率存在的矛盾的基础上探讨了高模式采样技术和超模式采样技术,经过比较这两种采样模式,认为超模式采样技术更具有工程可行性和优越性。然后对超模式采样计算机图像仿真结果进行了分析。     

航空绞车综合测量系统的设计与实现

简要介绍了航空绞车综合测量系统的功能、组成、工作原理及软硬件设计。     

基于立体视觉的孔探分析系统及其应用

孔探分析在现代航空发动机故障诊断中一直发挥着重要的作用，开发基于立体视觉的孔探分析系统，对提高故障诊断水平和预测准确度，节约发动机维护成本有着重要的现实意义，系统利用立体视觉技术以及图像处理技术，完成了对双目视觉左右图像的标定和匹配，实现了对实体表面的三维测量和立体重建，本文介绍了基于立体视觉的孔探分析系统的基本原理与主要功能，并结合应用实例验证了系统的有效性。     

提高CCD相机视觉定位度的算法研究

提出了一种提高利用CCD相机进行视觉定位的准确度的方法,对该方法的误差情况进行了分析,提出了减小误差影响的策略,对一个实例进行了研究,证明该方法可以极大地提高CCD相机的测量准确度.     

高空高速无人飞行器热控制系统设计

针对飞行时间短、速度和高度变化快、表面温度波动大的无人飞行器UAV(Unmanned Aerial Vehicles)热控制系统设计难题,提出了一种可解决实际工程问题的热分析计算方法.即把热天工况、冷天工况和标准天工况作为设计/试验工况;采用参考温度法、高超音速工程预测法或计算流体动力学CFD(Computational Fluid Dynamics)数值模拟法,确定了飞行器表面温度分布,并把其作为后续热分析数学模型的外边界条件;分析结构热容量对瞬态热载荷的影响,建立与之相应的边值问题方程,并采用有限差分法求解;根据高空高速飞行特点及瞬态热载荷值,确定仪器设备舱调温系统方案.     

Modeling novel methodologies for unmanned aerial systems–Applications to the UAS-S4 Ehecatl and the UAS-S45 Bálaam

The rising demand for Unmanned Aerial Systems(UASs) to perform tasks in hostile environments has emphasized the need for their simulation models for the preliminary evaluations of their missions. The efficiency of the UAS model is directly related to its capacity to estimate its flight dynamics with minimum computational resources. The literature describes several techniques to estimate accurate aircraft flight dynamics. Most of them are based on system identification. This paper presents an alternative methodology to obtain complete model of the S4 and S45 unmanned aerial systems. The UAS-S4 and the UAS-S45 models were divided into four sub-models, each corresponding to a specific discipline: aerodynamics, propulsion, mass and inertia, and actuator. The‘‘aerodynamic" sub-model was built using the Fderivatives in-house code, which is an improvement of the classical DATCOM procedure. The ‘‘propulsion" sub-model was obtained by coupling a two-stroke engine model based on the ideal Otto cycle and a Blade Element Theory(BET) analysis of the propeller. The ‘‘mass and the inertia" sub-model was designed utilizing the Raymer and DATCOM methodologies. A sub-model of an actuator using servomotor characteristics was employed to complete the model. The total model was then checked by validation of each submodel with numerical and experimental data. The results indicate that the obtained model was accurate and could be used to design a flight simulator.     

Real-time object tracking via least squares transformation in spatial and Fourier domains for unmanned aerial vehicles

This paper addresses the problem of real-time object tracking for unmanned aerial vehicles. We consider the task of object tracking as a classification problem. Training a good classifier always needs a huge number of samples, which is always time-consuming and not suitable for realtime applications. In this paper, we transform the large-scale least-squares problem in the spatial domain to a series of small-scale least-squares problems with constraints in the Fourier domain using the correlation filter technique. Then, this problem is efficiently solved by two stages. In the first stage, a fast method based on recursive least squares is used to solve the correlation filter problem without constraints in the Fourier domain. In the second stage, a weight matrix is constructed to prune the solution attained in the first stage to approach the constraints in the spatial domain. Then, the pruned classifier is used for tracking. To evaluate proposed tracker's performance, comprehensive experiments are conducted on challenging aerial sequences in the UAV123 dataset. Experimental results demonstrate that proposed approach achieves a state-ofthe-art tracking performance in aerial sequences and operates at a mean speed of beyond 40 frames/s. For further analysis of proposed tracker's robustness, extensive experiments are also performed on recent benchmarks OTB50, OTB100, and VOT2016.     

无人机系统的安全性与危险源分析

无人机系统的战术性能及优势将使其在未来高技术战争和民用航空中发挥越来越重要的作用。然 而,由于有人机与无人机飞行事故的特点不同,使得有人机的安全性分析与管理措施不完全适用于无人机系 统。首先,对无人机系统的飞行事故进行统计分析,得出无人机系统事故的特点;然后,合理借鉴有人机的安全 性分析,定义无人机系统的安全性,提出无人机系统事故的严酷度等级划分及相应的危险可接受度;最后,从设 计、机组训练及使用操作三方面进行危险源分析。本文提出的无人机系统不安全事件发生可能性等级划分和 危险源定性分析,可为后续无人机安全管理框架的构建奠定基础。     

无人机空中加油自主编队控制器设计

针对自主空中加油(AAR)任务中的飞行器编队形成问题,提出了一个完整的自主控制器方案。采用基于视线的编队制导律控制队形,产生制导指令。针对加油编队过程中产生的模型误差和尾涡扰动等不确定性,基于RBF神经网络和自适应Backstepping方法,设计了UAV姿态和速度非线性控制律来在线逼近和补偿不确定性,保证系统的鲁棒性和稳定性。使用协调转弯方式将航迹角指令转换为姿态指令,以实现控制律对航迹角指令的精确跟踪。最后,仿真结果验证了制导律和控制律的有效性。     

变体飞机典型形式的历史发展及其应用机型浅析

绝大多数变体飞机形式都不是"突然出现"的全新概念,而是来源于相关技术在过去近百年里的长期积累。因此,特定变体飞机形式及其技术既可广泛用于与其历史发展密切相关的有人驾驶飞机,也可用于总体特性类似的无人驾驶飞机。本文剖析了部分变体飞机形式的技术发展渊源,分析了变体飞机发展和无人机的关系,并指出了多种变体飞机在具体机型上的应用前景。