滑模变结构控制在电动舵机上的应用研究

根据电动舵机工作原理,推导了电动舵机的数学模型,电动舵机控制中采用滑模变结构控制。仿真结果表明：与传统比例积分微分（PID）控制相比,基于滑模变结构控制的电动舵机的快速性、抗负载能力、抗干扰和鲁棒性等有较大改善。     

Minimizing airfoil drag at low angles of attack with DBD-based turbulent drag reduction methods

Dielectric Barrier Discharge (DBD) based turbulent drag reduction methods are used to reduce the total drag on a NACA 0012 airfoil at low angels of attack. The interaction of DBD with turbulent boundary layer was investigated, based on which the drag reduction experiments were conducted. The results show that unidirectional steady discharge is more effective than oscillating discharge in terms of drag reduction, while steady impinging discharge fails to finish the mission (i.e. drag increase). In the best scenario, a maximum relative drag reduction as high as 64 % is achieved at the freestream velocity of 5 m/s, and a drag reduction of 13.7 % keeps existing at the freestream velocity of 20 m/s. For unidirectional discharge, the jet velocity ratio and the dimensionless actuator spacing are the two key parameters affecting the effectiveness. The drag reduction magnitude varies inversely with the dimensionless spacing, and a threshold value of the dimensionless actuator spacing of 540 (approximately five times of the low-speed streak spacing) exists, above which the drag increases. When the jet velocity ratio smaller than 0.05, marginal drag variation is observed. In contrast, when the jet velocity ratio larger than 0.05, the experimental data bifurcates, one into the drag increase zone and the other into the drag reduction zone, depending on the value of dimensionless actuator spacing. In both zones, the drag variation magnitude increases with the jet velocity ratio. The total drag reduction can be divided into the reduction in pressure drag and turbulent friction drag, as well as the increase in friction drag brought by transition promotion. The reduction in turbulent friction drag plays an important role in the total drag reduction.     

复合材料气瓶铝合金内衬泄漏失效分析北大核心CSCD

复合材料气瓶在自紧过程中发生泄漏。通过断口、金相、有限元分析及综合分析得出:气瓶瓶嘴根部各向异性的粗晶组织降低了气瓶瓶嘴根部的韧、塑性和强度是气瓶内衬自紧过程中发生低压力开裂泄漏的主要原因,通过改进和控制收口加热与旋压工艺,细化了气瓶瓶嘴根部的组织,最终解决了其自紧过程中泄漏问题,稳定复合材料气瓶的质量。     

导弹发射筒筒底压力场仿真

文章对筒底结构经过适当的简化,选取了计算模型,给出入口边界条件和筒内流场湍流参数,确立了动网 格边界条件,通过仿真计算,得出筒底压力场。比较筒内特征点压强和试验值之间的吻合情况,从而验证了筒底压 力场仿真方法的正确性。     

自紧工艺对CFRP气瓶应力水平的影响

文摘利用ABAQUS有限元软件,对铝内胆结构的CFRP气瓶进行了分析,根据其结构建立了模型,采用二维Hashin失效准则对纤维缠绕层进行了渐进失效分析,包含了4种失效模式,纤维及基体的拉伸和压缩失效。研究了不同失效模式的萌生和分布规律。对自紧原理对气瓶的影响进行了研究。分析得出只有当气瓶承载压力大于自紧工艺压力时,内衬PEEQ值才会在自紧工艺后继续发生累积,气瓶自紧力开始失效。     

一种基于双重空间网格结合的高效DSMC实现方法

基于双重空间网格结合策略，发展了一种高效率的贴体DSMC（direct simulation Monte Carlo）方法。通过将仿真分子在物理空间结构网格的位置坐标映射于计算空间的直角网格中，并在计算空间中完成分子所属网格单元的定位以及分子与边界是否发生作用的判断，从而结合结构网格的贴体性和直角网格的高效率计算的优点，提高DSMC方法的贴体性和计算效率。基于双重空间网格结合策略，通过直接映射和间接映射法分别建立DSMC程序，对微尺度收缩扩张喷管气体流动和超声速圆柱绕流进行模拟。数值结果表明：两种方法均很好地模拟出微喷管因尺度缩小导致的黏性效应和速度滑移现象以及超声速圆柱绕流发生的激波现象，具备有效性。与传统结构网格方法对比，两种方法的计算效率平均分别提高了3.85倍和2.85倍，具备高效性。     

Radially loading rotary extrusion for manufacturing large-size conical cylinders with inner transverse high ribs

The Large-size Conical Cylinders with Inner Transverse High Ribs (LCCWITHR) can reduce the weight of the parts while maintaining high rigidity and strength. Radially Loading Rotary Extrusion (RLRE) forming technology can achieve integral forming of LCCWITHR through the synergy of radial and rotary movements of dies. The flow law of the material during the forming process is the key to forming large-size inner ribs. At present, there is no unified understanding of the metal flow law of RLRE forming technology. An analytical expression was derived to predict the Radial Direction (RD) deformation loads. The FE simulation and process experiment were carried out to investigate the effects of the inclination angle, thickness factor and transition arc radius of the split top dies on the spacing of the metal diversion plane, the metal flow velocity of the rib area and the final radius of the inner rib. The influence of the split top dies loading distance and the bottom die rotation angle of each pass on the inner radius of the inner rib was verified. And the optimal combination of dies shape parameters and loading paths which can make the metal flow orderly was obtained: the inclination angle is 140°, the thickness factor is 3.64, the transition arc radius is 16 mm; the top dies loading distance is 15 mm, the bottom die rotation angle is 45°. The FE simulation results have been found to be in close agreement with physics experiment. The research results reveal the metal flow law of rib growth in the RLRE of LCCWITHR, which lays a theoretical foundation for subsequent thorough research and process optimization.     

Dynamic thermal coupling modeling and analysis of wet electro-hydrostatic actuator

The electro-hydrostatic actuator(EHA) used in more electric aircraft(MEA) has been extensively studied due to its advantages of high reliability and high integration. However, this high integration results in a small heat dissipation area, leading to high-temperature problems. Generally,to reduce the temperature, a wet cooling method of using the pump leakage oil to cool the motor is adopted, which can also increase the difficulty of accurately predicting the system temperature in the early desi...     

Source free unsupervised domain adaptation for electro-mechanical actuator fault diagnosis

A common necessity for prior unsupervised domain adaptation methods that can improve the domain adaptation in unlabeled target domain dataset is access to source domain dataset and target domain dataset simultaneously. However, data privacy makes it not always possible to access source domain dataset and target domain dataset in actual industrial equipment simultaneously, especially for aviation component like Electro-Mechanical Actuator (EMA) whose dataset are often not shareable due to the data copyright and confidentiality. To address this problem, this paper proposes a source free unsupervised domain adaptation framework for EMA fault diagnosis. The proposed framework is a combination of feature network and classifier. Firstly, source domain datasets are only applied to train a source model. Secondly, the well-trained source model is transferred to target domain and classifier is frozen based on source domain hypothesis. Thirdly, nearest centroid filtering is introduced to filter the reliable pseudo labels for unlabeled target domain dataset, and finally, supervised learning and pseudo label clustering are applied to fine-tune the transferred model. In comparison with several traditional unsupervised domain adaptation methods, case studies based on low- and high-frequency monitoring signals on EMA indicate the effectiveness of the proposed method.     

Lift enhancement based on virtual aerodynamic shape using a dual synthetic jet actuator

The Dual Synthetic Jet Actuator (DSJA) is used to develop a new type of lift enhancement device based on circulation control, and to control the flow over the two-dimensional (2D) NACA0015 airfoil. The lift enhancement device is composed of a DSJA and a rounded trailing edge (Coanda surface). The two outlets of the DSJA eject two jets (Jet 1 and Jet 2). Jet 1 ejects from the upper trailing edge, which increases the circulation of airfoil with the help of the Coanda surface. Jet 2 ejects from the lower trailing edge, which acts as a virtual flap. The Reynolds number based on the airfoil chord length and free flow velocity is 250000. The results indicate that the circulation control method based on Dual Synthetic Jet (DSJ) has good performance in lift enhancement, whose control effect is closely related to momentum coefficient and reduced frequency. With the increase of the reduced frequency, the control effect of the lift enhancement is slightly reduced. As the momentum coefficient increases, the control effect becomes better. When the angle of attack is greater than 4°, the increments of lift coefficients under the control of DSJ are larger than those under the control of the steady blowing at a same momentum coefficient. The maximum lift augmentation efficiency can reach 47 when the momentum coefficient is 0.02, which is higher than the value in the case with steady blowing jet circulation control.