二维小波变换及其在医学图像处理中的应用

介绍了二维离散小波变换的一般形式，在图像分解的基础上．分析了二维小波变换在医学图像消噪和图像增强中的应用，同时给出应用实例。结果表明，应用小波分析进行医学图像处理，能够有效地改善图像质量，有利于医生对病情的诊断和治疗。     

力控制反馈信号的神经网络法校正

对机器人的力反馈，主动柔顺控制和双向联想记忆的神经网络进行了综合研究，针对机器人腕力传感器输出信号的部分失真，提出了机器人擦洗平面玻璃力反馈信号神经校正的方法，并建立了相应的神经网络结构，在ＡｄｅｐｔＴｈｒｅｅ精密装配机器人上进行了试验验证，取得了满意的效果。     

空中受油管的绕流特性研究

空中加油是提高飞机航程、活动半径的重要方法。通过对四种固定受油管的数值模拟,从流动特性的改进方面说明了合适的截面及倾角会降低受油管绕流的压力脉动,进而使噪声降低。     

液压能源管路系统振动主动控制的理论研究

对飞机液压能源管路系统的振动问题进行了探讨.提出一种基于振动主动控制(VAC)技术对飞机液压能源管路系统进行消振的方法,在手段上采用压电/压电致伸技术,以压电陶瓷(PZT)作为作动器,具有驱动力大、响应频率高和体积小等优点;控制方法上采用参数寻优的控制策略,它能始终能根据外界干扰因素的变化来调整控制参数.经过理论分析和仿真验证,证明其具有良好的自适应性和鲁棒性,在变转速和变负载情况下始终能保持最佳的消振效果.     

喷流噪声特性与控制研究

本文着重研究喷流噪声机理及工程计算方法。通过实验研究了声功率与喷流速度的关系,表明在Mα>0.4时Lighthill方程和Lilley方程均与实验数据吻合,可分别使用。而Mα<0.4时,均偏差较大,通过本文实验表明,若改为6次方关系较为恰当。文章同时对喷流噪声指向性、谱特性进行了分析。最后对一种引射消声器进行了发展性研究,获得在135dB噪声条件下,降噪17dB的效果。     

利用双目标优化寻求颤振抑制控制律

本文对一个三角机翼/外挂系统的颤振主动抑制进行了系统的研究。在理论上,对如何应用现代控制理论设计优化控制律进行了探讨;对非定常气动力拟合的Pade矩阵近似作了改进;提出了用理想极点和二次型性能指标进行双目标优化来确定加权矩阵的思想;在实现上,用状态观测器和单秩法极点配置两种方法设计了输出反馈控制律。风洞实验结果表明:用本文的方法所综合的控制律是合适有效的,成功地使机翼/外挂系统的颤振速度提高了15.7％,与理论计算结果吻合良好。     

Noise in wireless systems from solar radio bursts

Solar radio bursts were first discovered as result of their interference in early defensive radar systems during the Second World War (1942). Such bursts can still affect radar systems, as well as new wireless technologies. We have investigated a forty-year record of solar radio burst data (1960–1999) as well as several individual radio events in the 23rd solar cycle. This paper reviews the results of a portion of this research. Statistically, for frequencies f  1 GHz (near current wireless bands), there can be a burst with amplitudes >10³ solar flux units (SFU; 1 SFU = 10⁻²² W/m²) every few days during solar maximum conditions, and such burst levels can produce problems in contemporary wireless systems.     

Study of the variability of blazars gamma-ray emission

The γ-ray emission of blazar jets shows a pronounced variability and this feature provides limits to the size and to the speed of the emitting region. We study the γ-ray variability of bright blazars using data from the first 18 months of activity of the Large Area Telescope on the Fermi Gamma-Ray Space Telescope. From the daily light-curves of the blazars characterized by a remarkable activity, we firstly determine the minimum variability time-scale, giving an upper limit for the size of the emitting region of the sources, assumed to be spheroidal blobs in relativistic motion. These regions must be smaller than ∼10⁻³ parsec. Another interesting time-scale is the duration of the outbursts. We conclude that they cannot correspond to radiation produced by a single blob moving relativistically along the jet, but they are either the signature of emission from a standing shock extracting energy from a modulated jet, or the superposition of a number of flares occurring on a shorter time-scale. We also derive lower limits on the bulk Lorentz factor needed to make the emitting region transparent for gamma-rays interacting through photon–photon collisions.     

The beaming of external Compton emission

We consider a relativistically moving blob consisting of an isotropic electron distribution that Compton-scatters photons from an external isotropic radiation field. We compute the resulting beaming pattern, i.e. the distribution of the scattered photons, in the blob frame as well as in the observer’s frame by using the full Klein–Nishina cross section and the exact incident photon distribution. In the Thomson regime the comparison of our approach with Dermer (1995) results in concurrent characteristics but different absolute number of the scattered photons by a factor of f_corr = 3.09. Additionally, our calculation yields a slightly lower boost factor which varies the more from the corresponding value in Dermer (1995) the higher the spectral index p of the electron distribution gets.     

基于Visual Basic的互感器负荷箱测量仪校准系统的实现

为解决互感器负荷箱测量仪同相分量和正交分量的校准问题,在分析互感器负荷箱测量仪工作原理的基础上,设计了基于电子/电工组合式的互感器负荷箱测量仪校准装置,并简要说明装置电工部分、电子部分以及上位机软件的实现。经省级计量研究院验证结果表明,该装置校准结果符合0.2级要求,可作为标准装置解决1级互感器负荷箱测量仪量值溯源问题。