边界层内水介质在压差驱动下沿小孔向气腔射流问题研究

对边界层内小孔气水多相流场下射流问题开展数值仿真及定常水洞试验研究,建立了适用于边界层内压差驱动下小孔向气腔射流多相流场问题研究的数值仿真计算模型,针对典型孔参数及气水流场条件,对比分析了仿真试验数据,验证了数值仿真模型的正确性及模型计算精度。结合流体质点受力及运动模型及平板边界层理论,分析了气水域压力场特征及水域流动规律对小孔射流过程的作用机理及影响规律,开展了孔参数对射流多相流场特征及射流量的影响研究。获得了小孔射流量估算方法,为航行体上防水装置设计提供数据支撑。     

入水参数对“水漂式”航行体跨介质运动影响数值仿真分析

以"水漂式"跨介质航行体为背景,采用AUTODYN软件建立了不同入水角度,不同入水速度的"水漂式"跨介质航行体的入水模型,通过对数值仿真结果的分析,得到了入水角度、入水速度对出水角度、运动速度及运动轨迹的影响。有效地验证了该"水漂式"航行体功能实现的可能性。结果表明,在同一入水速度下,随着入水角度的增加,出水角增大;在同一入水角度下,随着入水速度的增加,出水角增大。     

芳纶纤维增强PPS复合材料耐水性能的研究

利用芳纶纤维对ＰＰＳ复合材料进行增强改性,利用化学处理方法在纤维表面引入环氧基,以改善纤维与基体间的界面性能。结果表明：在相同纤维含量下,纤维长度增加可减少应力集中,有利于力学性能提高,纤维表面接枝环氧基团后,复合材料界面性能提高,水难以沿界面掺入,从而使得同一条件下耐高温热水性能提高。     

金属燃料/水冲压发动机构型试验

为了获得水冲压发动机构型对其燃烧性能的影响,采用中等金属含量燃料研究了四种发动机构型一次加水后的燃烧性能,试验得到了发动机压强、燃烧效率和喷射效率等性能参数。试验表明,不同发动机构型对发动机工作过程存在较大影响,发动机进水后存在收敛段,会出现压强振荡现象,收敛段也会降低喷射效率。金属燃料自持燃烧产物通过喷孔进入补燃室与水发生反应,虽可消除发动机压强振荡现象,但燃烧室会产生大量残渣。将燃烧室和补燃室直接相连,可实现发动机稳定工作,提高喷射效率。     

等离子-物理气相沉积硅/莫来石/硅酸镱环境障涂层的高温防护和耐热冲击性能研究

通过SiCf/SiC复合材料表面等离子喷涂(APS)硅黏结层和莫来石中间层,等离子-物理气相沉积(PS-PVD)制备硅酸镱面层,喷涂的整个环境障涂层体系组织致密,PS-PVD工艺制备的硅酸镱为层状结构,孔隙率＜1％.研究了 SiCf/SiC复合材料环境障涂层的抗静态氧化、循环氧化、水汽腐蚀和热冲击性能,发现复合材料表面...     

丙二醇改性水溶液的发汗冷却实验研究

针对液态水相变发汗冷却实验中的振荡、表面温度分布不均及结冰现象,对液体冷却剂进行调研,选取丙二醇添加剂对液态水改性,在主流温度573K,雷诺数1.2×10⁴的亚声速高温风洞中实验研究了不同丙二醇改性水溶液浓度和注入率下多孔平板的相变发汗冷却特性。结果表明：随丙二醇浓度增大,多孔平板对改性水溶液的渗透率增大,多孔平板表面温度的振荡幅度减小,同时振荡周期内温度波峰降低。因此,使用丙二醇改性水溶液作为冷却剂,发汗冷却结构表面温度分布更加均匀,热疲劳损伤减小,承温极限升高,进而烧蚀风险降低,这对有效且高效的热防护系统设计具有重要意义。另外,注入率越大平板表面冷却效果越好,表面温度的振荡幅度越小,因此增大注入率也是改善多孔板表面温度波动的有效方式。     

Estimation of vertically integrated water vapor in Hungary using MODIS imagery

Information about the amount and spatial structure of atmospheric water vapor is essential in understanding meteorology and the Earth environment. Space-borne remote sensing offers a relatively inexpensive method to estimate atmospheric water vapor in the form of integrated water vapor (IWV). The research activity reported in the present paper is based on the data acquired by the HRPT/MODIS (High Resolution Picture Transmission, MODerate resolution Imaging Spectroradiometer) receiving station established in Budapest (Hungary) by the Space Research Group of the Eötvös Loránd University. Integrated water vapor is estimated by the remotely sensed data of the MODIS instrument with different methods and also by the operational numerical weather prediction model of the European Centre for Medium-Range Weather Forecasts (ECMWF). Radiosonde data are used to evaluate the accuracy of the different IWV fields though it has been pointed out that the in situ data also suffers from uncertainties. It was found that both the MODIS and the ECMWF based fields are of good accuracy. The satellite data represent finer scale spatial structures while the ECMWF data have a relatively poor spatial resolution. The high quality IWV fields have proved to be useful for radiative transfer studies such as the atmospheric correction of other satellite data from times different than the overpass times of satellites Terra/Aqua and the forecast times of the model data. For this purpose the temporal variability of IWV is scrutinized both using ECMWF and MODIS data. Taking advantage of Terra and Aqua overpasses, the mean rate of change of IWV estimated by the near infrared method was found to be 0.47 ± 0.45 kg m⁻² h⁻¹, while it was 0.13 ± 0.65 kg m⁻² h⁻¹ based on the infrared method. The numerical weather prediction model’s analysis data estimated −0.01 ± 0.13 kg m⁻² h⁻¹ for the mean growth rate, while using forecast data it was 0.24 ± 0.18 kg m⁻² h⁻¹. MODIS data should be used when available for the estimation of the IWV in other studies. If no satellite data are available, or available data are only from one overpass, ECMWF based IWV can be used. In this case the analysis fields (or the satellite field) should be used for temporal extrapolation but the rate of change should be calculated from the forecast data due to its higher temporal resolution.     

Magnetic levitation of large water droplets and mice

We report successful levitation of large water droplets and mice using a newly built variable gravity simulator. The simulator consists mainly of a superconducting magnet with a room temperature accessible experimental levitating space. The superconducting magnet generates a field and field gradient product that is large enough to levitate water and many other common liquids. The warm bore of the magnet has a diameter of 66 mm, large enough to levitate small mammals. We demonstrate that water drops up to 50 mm in diameter and young mice can be levitated in the system. The capability of levitating large water drops and biological systems offers new opportunities for conducting detailed and in-depth study of properties of fluids and biological systems in reduced gravity environments.     

工程施工中深基坑高程放样的误差分析

论述了市政工程施工中深基坑高程放样方法,对放样过程中产生的误差及误差的大小进行了分析。本测量放样方法可以满足给排水工程施工,以及符合高程精度要求的验收规范。     

Global water vapour distribution in the upper troposphere and lower stratosphere during CRISTA 2

Water vapour measurements during the second mission of the CRyogenic Infrared Spectrometers and Telescopes for the Atmosphere (CRISTA) instrument are presented in the altitude regime 8–20 km. Mixing ratios are shown on isentropic surfaces (300–500 K) as global zonal means and as averages in 60° longitude sectors. Transports are indicated to occur preferentially on isentropic surfaces in the northern hemisphere, but not in the tropics and in the south. The hygropause is found shifted away from the equator towards the winter hemisphere. The amount of shift is longitude dependent and can be as great as 20–30°. The water content of the hygropause area shows considerable zonal asymmetries.