基于主动约束层阻尼控制的大型挠性航天器动力学模型

以大型挠性航天器简化模型——中心刚体和固接板混合系统为对象,同时考虑板表面粘贴的主动约束层阻尼结构,根据拟坐标拉格朗日方程,建立了包含所有高阶小量的完整动力学模型。建模时,采用混合坐标描述中心刚体和主动约束阻尼板的运动,用Golla-Hughes-Mctavish模型描述阻尼材料的复模量。基于该动力学模型可进行空间柔性板振动的主动约束阻尼控制器设计和大型挠性航天器的姿态动力学研究。     

超大口径环形天线包带展开过程动力学仿真

中间柔性包带是环形可展开天线的重要组成部分.中间包带拔销器解锁后,复材包带与环形桁架同步展开.因复材包带柔性较强,它会绕根部固定端进行回弹,因此展开过程存在金属接头和桁架上复材薄壁管件碰撞风险.随着天线口径增大,该风险会持续增大.基于柔性多体动力学理论对超大型口径环形可展开天线包带展开过程进行动力学建模仿真,并在此基础...     

Local stability analysis of interface region of astrophysical viscous shear flows with a gradual velocity gradient

In this paper, we extend the stability analysis of cold sharp shear flows to warm astrophysical cases with, inevitable, gradual velocity gradient in the interface region in the presence of viscosity effect. Using linear perturbation theory as well as the local approximation method, the instability growth rate of the excited electromagnetic modes has been investigated for the relativistic and non-relativistic cases of solar wind interacting with interstellar plasma medium. Results show that astrophysical shear systems with a small velocity gradient in the transition region are more stable rather than larger ones. Moreover, dependent on the viscosity coefficient value, the viscosity effects could have a positive role on the instability growth rate of the system in some range of initial bulk velocity, while it plays a destructive role in other velocity ranges.     

小功率随动系统多用试验台

本文介绍的小功率随动系统多用试验台,是一种试验设备,它拆装组合方便,参数易于调节,可以根据不同的需要对各种实用随动系统进行模拟试验。这种试验台既可对学生进行系统工作情况演示,又可为学生开设有关的毕业设计,有利于提高学生的感性认识和动手能力。     

一般线性阻尼系统的预解式以及模态正交性

本文研究一般线性阻尼系统的振动问题。仅假定系统的质量矩阵非奇异,将系统模态的加权正交关系式作了拓广,并利用相互等价的一次本征方程与二次本征方程间的转换关系,简捷地求得了预解式的各种模态展开式。     

用分域型矩量法分析阻尼介质对壳体塑性动力响应的影响

本文给出分域型短量法，并将其应用于壳体塑性动力响应问题。文中以承受均布冲击侧压的固支长圆柱壳为例，应用分域型矩量法分析阻尼介质对其塑性动力响应的影响。     

Lock-in phenomenon of tip clearance flow and its influence on aerodynamic damping under specified vibration on an axial transonic compressor rotor

In this study, the lock-in phenomenon of Tip Clearance Flow(TCF) instabilities and their relationship to blade vibration are investigated numerically on an axial transonic rotor with a large tip clearance. The capabilities of simulating instability flow and lock-in phenomenon are verified on a transonic rotor and a NACA0012 airfoil by comparing with the test data, respectively.The lock-in phenomenon is first numerically confirmed that may occur to TCF instabilities when its frequency is close to...     

Development of a coupled supersonic inlet-fan Navier–Stokes simulation method

A coupled supersonic inlet-fan Navier–Stokes simulation method was developed by using COMSOL-CFD code. The flow turning, pressure rise and loss effects across blade rows of the fan and the inlet-fan interactions were taken into account as source terms of the governing equations without a blade geometry by a body force model. In this model, viscous effects in blade passages can also be calculated directly, which include the exchange of momentum between fluids and detailed viscous flow close to walls. NASA Rotor 37 compressor test rig was used to validate the ability of the body force model to estimate the real performance of blade rows. Calculated pressure ratio characteristics and the distribution of the total pressure, total temperature, and swirl angle in the span direction agreed well with experimental and numerical data. It is shown that the body force model is a promising approach for predicting the flow field of the turbomachinery. Then, coupled axisymmetric mixed compression supersonic inlet-fan simulations were conducted at Mach number 2.8 operating conditions. The analysis includes coupled steady-state performance, and effects of the fan on the inlet. The results indicate that the coupled simulation method is capable of simulating behavior of the supersonic inlet-fan system.     

Mach reflection in steady supersonic flow considering wedge boundary-layer correction

Mach reflection in steady supersonic flow is an important phenomenon having received extensive studies, among which simplified theoretical models to predict the size of Mach stem and other flow structure are of particular interest. Past efforts for such models were based on inviscid assumption while in real cases the flow is viscous. Here in this paper we consider the influence of wedge boundary layer on the Mach stem height. This is done by including a simplified boundary layer model into a recently published inviscid model. In this viscous model, the wedge angle and the trailing edge height, which control the Mach stem height, are replaced by their equivalent ones accounting for the displacement effect of the wedge boundary layer, with the boundary layer assumed to be laminar or fully turbulent. This viscous model is shown to compare well with numerical results by computational fluid dynamics and gives a Mach stem height as function of the Reynolds number and Mach number. It is shown that due to the viscous effect, the Mach stem height is increased, through increasing the effective wedge angle.     

A comparative study on acoustic damping induced by half-wave, quarter-wave, and Helmholtz resonators

The damping characteristics of three-type resonators, a half-wave, a quarter-wave, and a Helmholtz resonator are studied experimentally by adopting linear acoustic test. A quantitative acoustic property of sound absorption coefficient in a model enclosure with the resonators is measured and thereby, the acoustic-damping capacity of a resonator is characterized. For a comparative study on acoustic damping, the damping capacity of a half-wave resonator is compared with that of the other resonators. A half-wave and a quarter-wave resonators have the same damping mechanism, but a quarter-wave resonator has much larger damping capacity than a half-wave resonator with the same diameter of a single resonator. It is found that shorter length of a resonator has the advantage of longer one with respect to the damping capacity. The damping capacity of a Helmholtz resonator increases with cavity volume and does as the orifice length decreases. A Helmholtz resonator has the highest damping capacity of three-type resonators and a half-wave resonator has the lowest. Besides, a Helmholtz resonator requires the smallest number of resonators for optimal damping. The design criterion of each resonator on the optimal damping is provided by the normalized parameter of open-area ratio and the similarity behavior for the optimal damping is observed for various enclosure diameters.