Nonlinear modal electromechanical coupling factor for piezoelectric structures containing nonlinearities

Within the linear framework, the Modal Electromechanical Coupling Factor (MEMCF) is an important indicator to quantify the dynamic conversion of mechanical energy and electrical energy of piezoelectric structures. It is also an important tool to guide the piezoelectric damping design of linear structures. Advanced aircraft often fly in maneuvers, and the variable working conditions induce drastic changes in the load level on structures. Geometric and contact nonlinearities of thin-walled structures and joint structures are often activated. To achieve a good vibration reduction effect covering all working conditions, one cannot directly use linear electromechanical coupling theory to instruct the piezoelectric damping design for nonlinear structures. Therefore, this paper defines the Nonlinear Modal Electromechanical Coupling Factor (NMEMCF) and proposes the corresponding numerical method for the first time to quantitatively evaluate the electromechanical coupling capability of nonlinear piezoelectric structures. Three candidate definitions of the NMEMCF are given, including two frequency definitions and one energy definition. The energy definition is the most promising one. It is not only applicable to both conservative and dissipative nonlinear structures but also compatible with the linear MEMCF. In addition, based on the energy formula, the NMEMCF can be obtained by only performing one nonlinear modal analysis in the open-circuit state. The analytical findings and the numerical tool are validated against two piezoelectric structures with different types of nonlinearities. A strong correlation among the NMEMCF, geometric parameters, and energy dissipation is observed. The results confirm that the proposed NMEMCF captures the physics of the electromechanical coupling phenomenon associated with nonlinear piezoelectric structures and can be used as an essential design indicator of piezoelectric damping, especially for variable working conditions.     

Mechanism of interconnected synchronized switch damping for vibration control of blades

The Synchronized Switch Damping (SSD) is regarded as a promising alternative to mitigate the vibration of thin-walled structures in aero-engines, especially for blades or bladed disks. The common manner is to shunt the switch circuit independently to a single piezoelectric structure. This paper is aimed at exploring a novel way of using the SSD, i.e., the SSD is interconnected between two piezoelectric structures or substructures. The damping mechanism, performance, and effective range of the interconnected SSD are studied numerically and experimentally. First, based on a dual cantilever beam finite element model, the time domain and frequency domain modeling and solving methods of the interconnected SSD are deduced and validated. Then, the influence of the amplitude and phase relationship on the damping effect of the interconnected SSD is numerically studied and compared with the shunted SSD. A self-sensing SSD control board is developed, and experimental studies are carried out. The results show that the interconnected SSD establishes an additional energy channel between the corresponding piezoelectric structures. When the amplitudes of the two cantilever beams are different, the interconnected SSD balances the vibration level of each beam. When the amplitudes of the two cantilever beams are the same, if the appropriate interconnection manner is selected according to the phase, the resonance peak can be reduced by more than 30%. When the vibration is in-phase/out-of-phase, the damping generated by the interconnected SSD in a cross/parallel manner is even more significant than the shunted SSD. Furthermore, this novel connection scheme reduces the number of SSD circuits in half. Finally, for engineering applications, we implement the proposed damping technology to the finite element model of a typical dummy bladed disk. A piezoelectric damping ratio of 13.7% is achieved when the amount of piezo material is only 10% of blade mass. Compared with traditional friction dampers, the major advancements of the interconnected SSD are: (A) it can reduce the vibration level of blades without friction interface; (B) the space constraint is overcome, i.e., the vibration energy is not necessarily dissipated independently in one sector or through physically adjacent blades, and instead, the dissipation and transfer of vibrational energy can be realized between any blade pair. If a specific gating circuit is adopted to adjust the interconnection manner of the SSD, vibration mitigation under variable working conditions with different engine orders will be expected; (C) designers do not need to worry about the annoying nonlinearities related to working conditions anymore.     

太极二号卫星精密热控关键技术及试验验证

针对引力波探测太极二号卫星提出的高稳定度温控需求，开展了高分辨率测温系统和高稳定度热控技术的研究，提出了多级阻尼的热控设计方法，建立了多级阻尼状态空间数学模型，揭示了系统中热量传递特性。该方法在太极二号核心载荷上进行了地面试验验证，试验结果表明核心舱关键仪器的温度满足指标要求。试验结果的噪声分析，不仅验证了精密热控关键技术，而且提出了关于热噪声分析与抑制的新方法，为后续航天器精密热控技术提供了理论分析方法和工程参考依据。     

Guided wave propagation analysis in stiffened panel using time-domain spectral finite element method

Stiffened panels have been widely utilized in fuselages and wings as critical load-bearing components. These structures are prone to be damaged under long-term and extreme loads, and their health monitoring has been a common concern. The guided wave-based monitoring method is regarded as an efficient approach to detect the damage in stiffened plates because of its wide monitoring range and high sensitivity to micro-damage. Efficient simulation of wave propagation can theoretically demonstrate the detection mechanism of the method. In this study, a Time-Domain Spectral Finite Element Method (TD-SFEM) is adopted to study the wavefield in stiffened plates, where continuous Absorbing Layers with Increasing Damping (ALID) strategy is proposed to circumvent the disturbance of reflected waves on boundaries. After the convergence analysis, the developed TD-SFEM with ALID is validated by the finite element method first. Then, wave scattering and the influence of the stiffener are investigated in detail by comparing the results with the non-stiffened structure. Finally, the effects of the parameters of the stiffener, such as the height and width, on wave propagation are studied, respectively. The results illustrate that the proposed TD-SFEM with ALID is an efficient approach to study the wave propagation in the stiffened plate and can reveal the mechanism of influence of the stiffener. It is found that the height of the stiffener changes the interference of wavefield in the plate, while the effects of the width are mainly in wave scattering and mode conversion.     

QD128燃气轮机动力涡轮防振设计

分析了可能引起QD12 8燃气轮机动力涡轮振动超限的各种因素 ,着重阐述了设计中采用的各项相应的防振措施 ,简要介绍了整机试车时动力涡轮的振动情况