New trade tree for manned mars missions

Recent studies on human missions to Mars suggest revisiting the parameters that have the most important impact on the complexity, the initial mass in low Earth orbit, the risks and the development costs for the first journey to the red planet. In the last NASA reference mission, a trade tree is proposed.     

Determination of land surface temperature using precipitable water based Split-Window and Artificial Neural Network in Turkey

Land surface temperature (LST) calculation utilizing satellite thermal images is very difficult due to the great temporal variance of atmospheric water vapor in the atmosphere which strongly affects the thermal radiance incoming to satellite sensors. In this study, Split-Window (SW) and Radial Basis Function (RBF) methods were utilized for prediction of LST using precipitable water for Turkey. Coll 94 Split-Window algorithm was modified using regional precipitable water values estimated from upper-air Radiosond observations for the years 1990–2007 and Local Split-Window (LSW) algorithms were generated for the study area. Using local algorithms and Advanced Very High Resolution Radiometer (AVHRR) data, monthly mean daily sum LST values were calculated. In RBF method latitude, longitude, altitude, surface emissivity, sun shine duration and precipitable water values were used as input variables of the structure. Correlation coefficients between estimated and measured LST values were obtained as 99.23% (for RBF) and 94.48% (for LSW) at 00:00 UTC and 92.77% (for RBF) and 89.98% (for LSW) at 12:00 UTC. These meaningful statistical results suggest that RBF and LSW methods could be used for LST calculation.     

小卫星最佳温度动态范围热控设计方法研究

为探索低热惯性小卫星动态传热下的热控设计方法,首先建立双层集总参数模型,在得到温度时均量解析解的基础上,类比阻尼振荡系统,采用傅里叶变换法求解温度波动量解析解,从而建立周期变化外热流下温度动态变化与热控参数间的解析关系。以此为基础提出“最佳温度动态范围”热控设计新方法。对某型微小卫星进行“最佳温度动态范围”热控设计,并通过其在轨温度遥测量动态变化对该方法的准确性和可行性进行验证。     

3D-Cf / Mg 复合材料的热残余应力研究

采用随动硬化有限元模型,研究了三维碳纤维增强镁基复合材料(3D-Cf/Mg)基体热残余应力的大小、分布以及不同工艺处理对热残余应力的影响。同时,对复合材料进行了高、低温处理,利用XRD定性分析了处理前后复合材料基体热残余应力的变化。计算结果表明:经过-196℃低温处理后,复合材料基体的平均Mises热残余应力由169.06 MPa减小至55.29 MPa;高温处理后,基体平均热残余应力几乎不变。该结果与实验结果吻合,证明了低温处理能明显降低复合材料基体的热残余应力。     

利用自然能临近空间浮空器的热特性分析

为解决临近空间浮空器驻留期间面临的“超热”、“超压”和“定点抗风”等难题,研究了一种新型的临近空间浮空器,其利用自然界的热能和风能,变“不利”为“有利”,通过简易可行的技术手段实现飞行高度和轨迹的控制,从而实现持久区域驻留。首先建立该新型浮空器的稳态热平衡模型并进行超热值的估算,然后分析系统参数。计算结果表明蒙皮的太阳吸收率和红外发射率对超热值有着重要影响,合理地选择热控涂层可以满足该新型浮空器的设计要求。     

栅格翼电弧风洞试验的气动参数模拟方法研究

为验证栅格翼防热方案的有效性,针对栅格翼单片级试验件厚度过低无法直接测量试验件冷壁热流密度的难题,提出了一种直接模拟来流气动参数的栅格翼热防护试验设计方法,能够准确考核防热方案,对类似结构的热防护试验具有指导意义。     

Computer modelling of a penetrator thermal sensor

The Philae lander is part of the Rosetta mission to investigate comet 67P/Churyumov-Gerasimenko. It will use a harpoon like device to anchor itself onto the surface. The anchor will perhaps reach depths of 1–2 m. In the anchor is a temperature sensor that will measure the boundary temperature as part of the MUPUS experiment. As the anchor attains thermal equilibrium with the comet ice it may be possible to extract the thermal properties of the surrounding ice, such as the thermal diffusivity, by using the temperature sensor data. The anchor is not an optimal shape for a thermal probe and application of analytical solutions to the heat equation is inappropriate. We prepare a numerical model to fit temperature sensor data and extract the thermal diffusivity. Penetrator probes mechanically compact the material immediately surrounding them as they enter the target. If the thermal properties, composition and dimensions of the penetrator are known, then the thermal properties of this pristine material may be recovered although this will be a challenging measurement. We report on investigations, using a numerical thermal model, to simulate a variety of scenarios that the anchor may encounter and how they will affect the measurement.     

基于双响应波段工作的红外热像仪测温原理与误差分析

为了提高红外热像仪测温的准确性,根据红外辐射理论,从红外热像仪的测温原理出发,分析了基于双响应工作波段的热像仪的测温原理,得出了目标物体的发射率、物体温度计算公式以及相应误差的估算公式,分析了各影响因素对热像仪测量准确度的影响,提供了一种目标物体发射率的测定方法,对利用红外热像仪准确测量内燃机等热能机械表面温度具有重要的意义。     

基于弹塑性理论的新型接触热导模型

提出了一种新型接触热导的模型。充分考虑界面上微凸体的变形,根据微凸体变形连续的特点,分别给出了弹性、弹塑性、塑性三种变形时的接触方程。用Weierstrass-Mandelbrot分形函数描述粗糙表面轮廓曲线,并考虑了接触点的基体热阻及其界面收缩热阻,构建了分形热阻网格模型,分析了接触热导与载荷的关系,与实验数据及模型、Mikic弹性模型和Yovanovich塑性模型的预测值进行了比较。结果表明:该模型能较好地预测界面接触热导,有其合理性。     

太阳电池在平流层中的工作性能分析

近年来,临近空间受到广泛关注,多种平流层飞行器被提出,它们大多以太阳电池为 主要的能源获取装置。研究平流层的太阳电池的性能,对平流层的开发和利用具有重要意义 。首先建立了平流层中太阳电池的热环境模型,并结合硅太阳电池的电学模型,得到了 平流层中硅太阳电池的热电耦合分析模型,进而用数值模拟方法对太阳能电池的热学、电学 性能进行了分析和讨论。研究结果表明,平流层热环境的变化对太阳能电池的温度、输出功 率以及电效率都有影响。讨论了风速对太阳电池性能的影响,结果表明随着风速的增 加,太阳电池温度降低、内部温差先增加后减小、发电效率和输出功率都增加。