镁基水反应金属燃料的热分解性能

采用热重-差热分析联用(TG-DTA)、差示扫描量热(DSC)、加压热重(PTG)等热分析方法,研究了镁基水反应金属燃料热分解反应的基本特性及其变化规律。研究发现,燃料热分解过程中先后发生AP分解反应、HTPB分解反应,氩气中不发生Mg的氧化反应;添加催化剂、减小AP粒度、增大氧化剂与粘合剂比例、增大细Mg粉含量等,可以降低燃料中AP的分解温度T,减小表观活化能Ea,增大反应速率常数k;减小AP粒度、增大氧化剂与粘合剂比例可以降低燃料中HTPB的分解温度,减小表观活化能Ea,增大反应速率常数k;随着压强增大,AP与HTPB分解失重速率增大、AP失重百分数增大、燃料热分解凝聚相产物质量百分数减少,压强对AP分解影响较大,对HTPB分解影响较小。     

Nusselt number for convection driven by tidal and radiogenic heating

The ‘traditional’ formulas giving the Nusselt number Nu as a function of Rayleigh number Ra cannot be used for low and moderate values of Ra. Moreover, the recent progress in 3D numerical modeling makes possible to determine the Nusselt number Nu as a function of Rayleigh number Ra for convection driven by radiogenic and tidal heating. We found that for low and moderate Ra: Nu(Ra) = ε(Ra+ξ)^λ where λ depends on rheology and boundary conditions, ε depends only on the mode of heating, and ξ = ε^−1/λ · Nu(Ra) makes possible to develop a parameterized theory of convection in medium size icy satellites. We also indicate some differences between convection driven by tidal and radiogenic heating and convection driven exclusively by radiogenic heating.     

环路热管地面实验平台的热设计

文章旨在建立环路热管的地面实验平台,模拟环路热管在太空轨道运行的热环境。首先建立了地面实验舱的物理模型,对其如何实现在地面模拟太空中该环路热管的热环境进行了热分析计算,其次确定了满足环路热管轨道运行最冷工况和最热工况下的实验舱的壁面温度,最后对实现该轨道环境所需要的壁面绝热材料、制冷剂、制冷设备进行了选择,初步完成了实验平台的热设计。计算结果表明,在同时考虑舱内对流和辐射换热的条件下,要实现空间热边界条件,实验舱内舱的壁温要保证在-62.1~-10.9℃之间变化。     

可展开式辐射器热控对航天器轨道调整的适应性分析

为提高航天器热控系统对轨道调整的适应能力,本文研究了与流体回路耦合的可展开式辐射器热控方案在不同轨道高度下的热控性能,分析了不同轨道高度时辐射器面临的热环境的影响,在不同轨道高度下比较了固定辐射器与可展开辐射器的热控特性.结果 表明,随着辐射器展开角度的变化,辐射器吸收的空间热流随之发生变化,从而对热控系统的散热能力带...     

Recent active thermal management technologies for the development of energy-optimized aerospace vehicles in China

Recently, the development of modern vehicles has brought about aggressive integration and miniaturization of on-board electrical and electronic devices. It will lead to exponential growth in both the overall waste heat and heat flux to be dissipated to maintain the devices within a safe temperature range. However, both the total heat sinks aboard and the cooling capacity of currently utilized thermal control strategy are severely limited, which threatens the lifetime of the on-board equipment and even the entire flight system and shrink the vehicle’s flight time and range. Facing these thermal challenges, the USA proposed the program of “INVENT” to maximize utilities of the available heat sinks and enhance the cooling ability of thermal control strategies. Following the efforts done by the USA researchers, scientists in China fought their ways to develop thermal management technologies for Chinese advanced energy-optimized airplanes and spacecraft. This paper elaborates the available on-board heat sinks and aerospace thermal management systems using both active and passive technologies not confined to the technology in China. Subsequently, active thermal management technologies in China including fuel thermal management system, environment control system, non-fuel liquid cooling strategy are reviewed. At last, space thermal control technologies used in Chinese Space Station and Chang’e-3 and to be used in Chang’e-5 are introduced. Key issues to be solved are also identified, which could facilitate the development of aerospace thermal control techniques across the world.     

硅橡胶基防热涂层动态烧蚀行为及机理研究

针对两种典型硅橡胶基防热涂层开展高温燃气流烧蚀实验，通过对烧蚀后涂层的宏观及微观形貌分析，探讨了其防隔热机理及烧蚀模型。研究结果表明：烧蚀后两种涂层均存在液态层、陶瓷层、热解层以及原始层；烧蚀过程中甲基苯基硅橡胶涂层主要发生主链“回咬”成环反应，导致树脂基体交联密度降低，力学性能下降，涂层外表面发生开裂，甲基乙烯基硅橡胶涂层则主要发生侧基交联反应，使树脂基体交联密度上升，促进涂层发生陶瓷化转变；热辐射、热容吸热、热解反应吸热以及热阻塞效应为四种主要的热耗散机制，质量损失产生的原因主要包括反应气体释放以及气动剪切力导致的机械剥蚀。     

Nonlinear aeroelastic analysis of the folding fin with freeplay under thermal environment

The nonlinear aeroelastic behavior of a folding fin in supersonic flow is investigated in this paper. The finite element model of the fin is established and the deployable hinges are represented by three torsion springs with the freeplay nonlinearity. The aerodynamic grid point is assumed to be at the center of each aerodynamic box for simplicity. The aerodynamic governing equation is given by using the infinite plate spline method and the modified linear piston theory. An improved fixed-interface modal synthesis method, which can reduce the rigid connections at the interface, is developed to save the problem size and computation time. The uniform temperature field is applied to create the thermal environment. For the linear flutter analyses, the flutter speed increases first and then decreases with the rise of the hinge stiffness due to the change of the flutter coupling mechanism. For the nonlinear analyses, a larger freeplay angle results in a higher vibration divergent speed. Two different types of limit cycle oscillations and a multiperiodic motion are observed in the wide range of airspeed under the linear flutter boundary. The linear flutter speed shows a slight descend in the thermal environment, but the effect of the temperature on the vibration divergent speed is different under different hinge stiffnesses when there exists freeplay.     

航空电气电弧、短路危害及保护研究

航空电气电弧、短路可能会导致难以挽回的损失,研究航空电气电弧、短路的危害及其保护措施具有 重要意义。通过试验室搭建民用飞机典型的115V/400Hz三相交流电气线路,选取金属导体作为多余物,采 用试验法对飞机电气电弧、短路故障现象进行研究,验证和分析传统热断路器的工作特性,确认电气电弧、短路 故障对电气线路和设备产生的危害程度;同时,分析三种更好的电气电弧、短路保护方法。结果表明:传统热断 路器仅对短路故障具有保护作用,对电气电弧不能产生保护作用;三种新的保护方法电弧检测和保护时间过 长,电弧已对导线和设备产品造成不可恢复的损坏。     

SiC/Al复合丝的耐蚀性和高温稳定性研究

本研究结果表明,SiC/L_6和SiC/LF_6复合丝在真空中加热至600℃和在空气中400℃暴露144小时,以及在蒸馏水和5%NaCl水溶液中浸泡15天后,其强度保留率大于87%,证明SiC/Al复合丝具有良好的耐蚀性和高温稳定性,用气相层析仪和发射光谱分析了腐蚀气体、溶液和白色沉淀,初步确定其反应机理是电化学腐蚀。与C/Al复合丝相比,SiC/Al腐蚀速度缓慢,纤维—基体界面损伤极小。     

航天器太阳电池阵热真空试验技术

文章叙述了进行太阳电池阵热真空试验的重要性、一般要求及相关的主要试验技术.