复合材料螺栓连接失效的数值模拟

作为一种重要的连接及承载形式,复合材料螺栓的连接性能直接影响到结构组件的承载可靠性.本文针对复合材料各向异性及渐进损伤特点,建立了包含复合材料螺栓及复合材料板的有限元模型.通过编制U-Mat程序,利用ABAQUS商用软件对复合材科螺栓连接的失效过程进行了数值模拟,得到了连接件的载荷-位移曲线,并对连接件的失效模式进行了分析.     

基于脉冲子结构的探测器结构动力学优化设计

针对传统结构优化设计中，精细化模型求解复杂结构动响应过于耗时的问题，引入保精度、高效的脉冲子结构方法，提出一种考虑结构动力学响应的优化设计流程，并对月球探测器太阳翼结构进行优化分析，获得了太阳翼结构设计参数，有效地提高了太阳翼动力学特性指标，改善了月球探测器关键位置处的动力学环境。结果表明，脉冲子结构方法可以有效应用于航天器结构动力学优化设计，提高优化设计效率，所得优化结果对实际结构设计具有一定指导意义。     

Multiphysics simulation method of Lamb wavepropagation with piezoelectric transducers under load condition

Lamb Wave(LW) simulation under time-varying conditions is an effective and low cost way to study the problem of the low reliability of the structural health monitoring methods based on the LW and Piezoelectric Transducer(PT). In this paper, a multiphysics simulation method of the LW propagation with the PTs under load condition is proposed. With this method, two key mechanisms of the load influence on the LW propagation are considered and coupled with each other. The first mechanism is the acoustoelastic effect which is the main reason of the LW velocity change. The second key mechanism is the load influence on piezoelectric materials, which results in a change of the amplitude. Based on the computational platform of the COMSOL Multiphysics, a multiphysics simulation model of the LW propagation with the PTs under load condition is established. The simulation model includes two physical phenomena. The first one is called solid mechanics, which is used to simulate the acoustoelastic effect being combined with the hyperelastic material properties of the structure in which the LW propagates. The second one is called electromechanical coupling, which considers the simulation of the piezoelectric effect of the PTs for the LW excitation and sensing. To simulate the load influence on piezoelectric materials, a non-linear numerical model of the relationship between the load and the piezoelectric coefficient d31 is established based on an experiment of the load influence on the LW. The simulation results under uniaxial tensile load condition are obtained and are compared with the data obtained from the experiment. It shows that the variations of the phase velocity and amplitude of the LW obtained from the simulation model match the experimental results well.     

月壤采样冲击破碎过程的影响参数分析

针对月球表面的月壤采样过程中遇到不同粒度的块状月岩会对钻探取样工作造成不同程度的影响和阻碍的问题，提出了一种通过有限元仿真模型结合类月岩材料力学特性进行有效分析的方法，作为提高效率的依据。首先通过实验和仿真拟合，得到硬度接近于月岩的两种类岩石材料红砖和砂岩的材料模型参数。在此基础上，用实际尺寸的机构有限元模型进行仿真，得到采样冲击机构冲击过程中不同参数的影响。基于该参数分析，对于冲击机构及其冲击过程提出改进建议，可有效提高采样过程中冲击破碎岩石效率。     

General aspects on structural integrity

This paper seeks to mark the fruitful collaborative research between scholars in the University of Southampton and Beihang University for last 25 years on structural integrity. Their efforts addressed some important issues in structural integrity such as fatigue and fracture behavior,fatigue load spectra, fatigue and fracture lifetimes, reliability-based service period, adhesively bonded composite patch repairs, Plain Woven Fabric(PWF) composites and composite artefacts.New advances in engineering approaches, experimental methods, numerical algorithms and understanding of failure mechanisms relating to structural integrity are highlighted. Probable limits(or drawbacks) are also discussed. This review provides an insight into the general aspects on structural integrity and constitutes a basis for pointers to the further works on structural integrity.     

广布损伤的试验研究与有限元分析

 通过对无钉载3排平行孔平板和无钉载3排交错孔平板从无裂纹开始的疲劳试验,发现应力大小对是否出现广布损伤(MSD)有重要影响,首裂孔和断裂排位不总是一一对应。在试验中观察到了MSD的竞争现象,证实了群发小裂纹也是MSD中一种重要的破坏形式。采用FRANC2D/L建立了对生裂纹、非对生裂纹和单裂纹3种开裂模式的有限元模型。计算结果表明:短裂纹扩展过程中,裂纹间干涉效应不明显,3种模式的应力强度因子增长趋势相近;而对于长裂纹,试验和有限元计算都证明了裂纹间的干涉显著地加快了裂纹的扩展。     

孔边双边凸台结构损伤容限设计及分析

本文利用有限元软件建立孔边双边凸台结构的有限元模型,根据静力分析结果确定开裂模式进行以裂纹扩展寿命为目标,凸台高宽比为变量的设计优化计算分析。研究不同凸台体积、不同孔半径下最优高宽比的变化规律。计算结果表明,存在一个最优高宽比使得凸台结构具有良好的损伤容限特性和较轻的质量,该方法具有很强的工程实用性。     

一种评估空间环境下半导体材料损伤的模拟方法

提出了一种模拟空间环境下半导体材料晶格损伤速率的方法, 计算了375km轨道高度不同纬度空间位置的飞行器模型中硅片产生晶格损伤的速率. 本方法考虑了宇宙射线的质子、正负电子、中子和γ射线成分, 建立了简单的多层飞行器结构模型, 并通过模拟给出了芯片上氕、氘、氚、氦、正负电子、正负π介子、γ射线及中子的损伤结果. 相比给出材料中的非电离能量损失, 更进一步给出了晶格损伤的产生速率, 为半导体器件的可靠性评估提供了进一步的参考数据.      

考虑耦合损伤的燃气轮机叶片材料高低周复合疲劳寿命研究

燃气轮机叶片在实际工作过程中,受到高低周载荷共同作用而易发生疲劳失效.针对高低周复合疲劳损伤演化和寿命预测比较复杂这一问题,考虑高低周载荷叠加形成的耦合损伤,建立了一种新的高低周复合疲劳寿命预测模型,在此基础之上,引入弱化函数描述某些低幅高周载荷对复合损伤的弱化作用,建立了具有低载强化寿命效应的高低周复合疲劳寿命预测模...     

飞机结构损伤及腐蚀控制自动管理系统软件研发及应用

飞机结构损伤和腐蚀对民航飞机的飞行安全产生重要影响,对于飞机结构的损伤和腐蚀进行正确控制与管理是航空维修企业的重要工作。本文阐述自行开发的飞机结构损伤及腐蚀控制自动管理系统软件的设计和应用情况,介绍了该软件的主要功能和应用效果。