对海作战无人机指挥控制系统发展综述

首先对国外无人机指挥控制系统的发展现状、趋势进行了分析,引出我国对海作战无人机指挥控制系统产品谱系、技术领域发展路线的研究需求,还分析了我国对海作战无人机的作战需求和部署模式,得出不同形态控制站的发展思路和技术路线,同时结合美军无人机指挥控制系统核心能力发展情况,提出我国对海作战无人机指挥控制系统重点技术发展规划,为我国对海作战先进无人机指挥控制装备的研发进行探索。     

The dynamics and control of the CubeSail mission: A solar sailing demonstration

The CubeSail mission is a low-cost demonstration of the UltraSail solar sailing concept (, ,  and ), using two near-identical CubeSat satellites to deploy a 260 m-long, 20 m² reflecting film. The two satellites are launched as a unit, detumbled, and separated, with the film unwinding symmetrically from motorized reels. The conformity to the CubeSat specification allows for reduction in launch costs as a secondary payload and utilization of the University of Illinois-developed spacecraft bus. The CubeSail demonstration is the first in a series of increasingly-complex missions aimed at validating several spacecraft subsystems, including attitude determination and control, the separation release unit, reel-based film deployment, as well as the dynamical behavior of the sail and on-orbit solar propulsion. The presented work describes dynamical behavior and control methods used during three main phases of the mission. The three phases include initial detumbling and stabilization using magnetic torque actuators, gravity-gradient-based deployment of the film, and steady-state film deformations in low Earth orbit in the presence of external forces of solar radiation pressure, aerodynamic drag, and gravity-gradient.     

Overview of current capabilities and research and technology developments for planetary protection

The pace of scientific exploration of our solar system provides ever-increasing insights into potentially habitable environments, and associated concerns for their contamination by Earth organisms. Biological and organic-chemical contamination has been extensively considered by the COSPAR Panel on Planetary Protection (PPP) and has resulted in the internationally recognized regulations to which spacefaring nations adhere, and which have been in place for 40 years. The only successful Mars lander missions with system-level “sterilization” were the Viking landers in the 1970s. Since then different cleanliness requirements have been applied to spacecraft based on their destination, mission type, and scientific objectives. The Planetary Protection Subcommittee of the NASA Advisory Council has noted that a strategic Research & Technology Development (R&TD) roadmap would be very beneficial to encourage the timely availability of effective tools and methodologies to implement planetary protection requirements. New research avenues in planetary protection for ambitious future exploration missions can best be served by developing an over-arching program that integrates capability-driven developments with mission-driven implementation efforts. This paper analyzes the current status concerning microbial reduction and cleaning methods, recontamination control and bio-barriers, operational analysis methods, and addresses concepts for human exploration. Crosscutting research and support activities are discussed and a rationale for a Strategic Planetary Protection R&TD Roadmap is outlined. Such a roadmap for planetary protection provides a forum for strategic planning and will help to enable the next phases of solar system exploration.     

Lightweight structure of a phase-change thermal controller based on lattice cells manufactured by SLM

Thermal controllers equipped with phase-change materials are widely used for maintaining the moderate temperatures of various electric devices used in spacecraft. Yet, the structures of amounts of thermal controllers add up to such a large value that restricts the employment of scientific devices due to the limit of rocket capacity. A lightweight structure of phase-change thermal controllers has been one of the main focuses of spacecraft design engineering. In this work, we design a lightweight phase-change thermal controller structure based on lattice cells. The structure is manufactured entirely with AlSi10 Mg by direct metal laser melting. The dimensions of the structure are 230 mm × 170 mm × 15 mm, and the mass is 190 g, which is 60% lighter than most traditional structures(500–600 g) with the same dimensions. The 3 D-printed structure can reduce the risk of leakage at soldering manufacture by a welding process. Whether the strength of the designed structure is sufficient is determined through mechanical analysis and experiments. Thermal test results show that the thermal capacity of the lattice-based thermal controller is increased by50% compared to that of traditional controllers with the same volume.     

Simultaneous spacecraft attitude and orbit estimation using magnetic field vector measurements

Based on magnetometer measurements only, three-axis attitude, rate, and orbit estimation are successfully achieved. A single Augmented Dynamics Extended Kalman Filter (ADEKF) is configured by combining the spacecraft nonlinear attitude dynamics and quaternion kinematics with orbital mechanics. The filter design is adopted for three-axis stabilized spacecraft in low Earth orbits where the aerodynamic drag is the dominant source of disturbances in addition to the spacecraft magnetic residuals. To reduce the computational burden, another Interlaced Extended Kalman Filter (IEKF) is developed to uncouple the attitude/rate from the orbit dynamics. Both filters are implemented using the magnetometer measurements and their corresponding time derivatives. As a part of EgyptSat-1 flight scenario, detumbling and standby modes are used for performance testing of the ADEKF. The concept of local observability is applied to the basic filter and the stability is investigated by incorporating extensive Monte Carlo simulations with uniformly distributed initial conditions. The filter shows the capability of estimating the attitude better than 5 deg and rate of order 0.03 deg/s in each axis. In orbit estimation, the filter is capable of estimating the position with accuracy less than 8 km and velocity upto 5 m/s in each axis.     

复合材料电搭接分析

电搭接是指用金属编织线或金属片将机载设备的外壳与飞机基本结构连接起来,使两者处于一个共同的电位点。飞机上采用复合材料后,由于复合材料与金属之间电性能的差异,在GJB358-87中规定的搭接电阻值就不完全适用。本文在研究了大量国内外资料的基础上,根据国内目前的技术水平,对安装在复合材料结构上的机载设备,按不同的电搭接功能要求,提出了合适的搭接电阻值。     

一种再入飞行器结构的热流载荷反演方法

提出了一种基于共轭梯度法的再入飞行器热流载荷反演方法.以一维结构为例验证反演方法的有效性,并分析了材料温变热物性参数和传感器测量误差对反演精度的影响;进而针对热防护结构和返回舱结构开展了热流载荷反演分析.结果表明:本文方法能有效地反演热防护结构和返回舱结构的热流载荷;考虑材料的温变热物性参数会使得反演过程存在非线性因素...     

The statistical treatment implemented to obtain the planetary protection bioburdens for the Mars Science Laboratory mission

NASA Planetary Protection Policy requires that Category IV missions such as those going to the surface of Mars include detailed assessment and documentation of the bioburden on the spacecraft at launch. In the prior missions to Mars, the approaches used to estimate the bioburden could easily be conservative without penalizing the project because spacecraft elements such as the descent and landing stages had relatively small surface areas and volumes. With the advent of a large spacecraft such as Mars Science Laboratory (MSL), it became necessary for a modified—still conservative but more pragmatic—statistical treatment be used to obtain the standard deviations and the bioburden densities at about the 99.9% confidence limits. This article describes both the Gaussian and Poisson statistics that were implemented to analyze the bioburden data from the MSL spacecraft prior to launch. The standard deviations were weighted by the areas sampled with each swab or wipe. Some typical cases are given and discussed.     

航天器数据预测中的因果关系调整技术应用研究

在航天领域，预测参数不但受其自身时序变化的影响，也普遍受到关联因素的交叉影响。因果因素的影响也需要在时序预测过程中被考虑，该类问题被列入因果调整技术当中。为了更全面地反映航天器参数变化的实际情况，提出了一种基于层次分析法（AHP）的因果调整方法。该方法提供了因果因素的判断调整方法，并将调整系数应用于时序模型预测的修正。最终，建立了一个因果与时序预测有机结合的预测体系。     

国外卫星泄漏故障分析

介绍了国外影响卫星部分飞行任务的泄漏故障和使卫星工作寿命缩短的泄漏故障, 以及导致卫星发射失败的泄漏故障。对国外卫星泄漏故障发生的时间、国别、型号、发生的系统和部位, 以及影响程度分别进行了统计分析, 并得出相应的结论