积木式方法与试验金字塔的历史沿革与发展趋势

采用积木式方法构建试验金字塔是目前已经被广泛接受的用来完成大型飞机结构强度验证的基本手段。本文概述了积木式方法和试验金字塔的发展历程和趋势，介绍了不同型号的美军机在研制过程中所建立的强度验证试验金字塔的统计结果，并且从试验层级、对象、目的和类型等四个方面比较了试验内容的数量与经费占比，由此来说明基础层级试验验证工作在强度验证试验金字塔中重要性和经济性。通过对虚拟试验在强度验证工作中的发展趋势、应用和限制的介绍，为顺利完成相关的全尺寸部件和整机的强度验证提供可靠的保障手段。     

Al—Mg系合金工艺性能试验及结果

本文介绍了几种常用的铝镁合金，通过若干工艺性能的对比试验，以实际的检测数据分析说明各自的特点及其共性，以供产品设计和工程应用时选材参考。     

略议规制传销的必要性--借鉴德国新《反不正当竞争法》

上世纪90年代以来，“传销”的蔓延造成了日益严重的社会问题。它源于行政法理论界探讨所得的“谨慎尝试”观对许可“传销”的倡言，但对这些法律研究的反思未曾开展。补作这项工作需要以系统法律理论分析“传销”及其相关问题。对德国新的《反不正当竞争法》第16条的系统分析显示，以普通法规制“传销”比以行政法有根本性优点。笔者进言采纳德国新的规制模式，以竞争法摧毁“传销”这种社会“顽疾”。     

Comparison of observed ionospheric vertical TEC over the sea in Indian region with IRI-2016 model

The vertical ionospheric TEC values obtained from GAGAN grid based ionospheric delay correction values over the sea in the Indian equatorial region have been compared with the corresponding values derived from the International Reference Ionosphere model, IRI-2016. The objective of this work is to study the deviation of the vertical TEC derived from the IRI model from ground truths over the sea for different conditions. This will serve the basic intention of assessing the candidature of the IRI model as an alternative ionospheric correction model in navigation receivers in terms of accuracy. We have chosen different solar activity periods, seasons, geomagnetic conditions, locations etc. for our comparison and analysis. The TEC values by the IRI-2016 were compared with the actual measured values for the given conditions and errors were obtained. The measured vertical TEC values at the ionospheric grid points were derived from the GAGAN broadcast ionospheric delay data and used as reference. The IRI model with standard internal functions was used in estimating the TEC at the same ionospheric grid points. The errors in the model derived values are statistically analysed. Broadly, the results show that, for the Indian sector over the sea, the IRI model performs better on quiet days in off equatorial regions, particularly in the northern region. The overall performance degrades for other conditions with the model generally underestimating the true TEC values and most severely in the equatorial region. The performance is worst in this region for the disturbed days of the equinoctial period. The comparison study is also done with the TEC data measured directly by dual frequency GPS receivers. The results were found to be in general agreement with those obtained by comparing the model with GAGAN broadcast data as reference. This study will be useful in considering the IRI-2016 model for real time estimates of TEC as an alternative to the current parametric model in a satellite navigation receiver in absence of other options.     

Real-time clock comparison and monitoring with multi-GNSS precise point positioning: GPS,GLONASS and Galileo

The precise point positioning (PPP) technique is widely used in time and frequency applications. Because of the real-time service (RTS) project of the International GNSS Service, we can use the PPP technique for real-time clock comparison and monitoring. As a participant in the RTS, the Centre National d’Etudes Spatiales (CNES) implements the PPPWIZARD (Precise Point Positioning with Integer and Zero-difference Ambiguity Resolution Demonstrator) project to validate carrier phase ambiguity resolution. Unlike the Integer-PPP (IPPP) of the CNES, fixing ambiguities in the post-processing mode, the PPPWIZARD operates in the real-time mode, which is also called real-time IPPP (RT-IPPP). This paper focuses on applying the RT-IPPP for real-time clock comparison and monitoring. We review the principle of real-time clock comparison and monitoring, and introduce the methodology of the RT-IPPP technique. The observations of GPS, GLONASS and Galileo were processed for the experiments. Five processing modes were provided in the experiment to analyze the benefits of ambiguity resolution and multi-GNSS. In the clock comparison experiment, the average reduction ratios of standard deviations with respect to the G PPP mode range from 9.7% to 35.0%. In the clock monitoring experiment, G PPP mode can detect clock jumps whose magnitudes are larger than 0.9 ns. The RT-IPPP technique with GRE PPP AR (G) mode allows for the detection of any clock jumps larger than 0.6 ns. For frequency monitoring, G PPP mode allows detection of frequency changes larger than 1.1 × 10⁻¹⁴. When the RT-IPPP technique is applied, monitoring with GRE PPP AR (G) mode can detect frequency changes larger than 6.1 × 10⁻¹⁵.     

Levy 方法的改进

由于Levy方法简化了指标函数,并采用经典的最小二乘法,用于估计系统传递函数的参数,受实验数据误差影响大。基于Levy方法但保持原来的指标函数,提出一种改进的增量迭代算法和正交最小二乘法,仿真结果表明,该算法具有良好的收敛性,并使系统参数估计精度较Levy方法有明显的提高。     

烟气流对飞机进场着陆影响的数值仿真研究

飞机穿越高烟囱排放的高速热气流,尤其是在起飞和进场着陆阶段,烟气流场将影响飞机的航迹保持,造成颠簸,或影响乘座舒适性。用数值仿真方法论证飞机在正常飞行和非正常飞行、开环操纵和闭环操纵、有风和静风情况下,穿越烟气流场的运动特性。实践证明论证结论与飞行结果一致     

目标机动条件下的定点伴飞控制方法研究

对目标机动条件下的定点伴飞控制进行了研究。根据相对运动关系,建立适于伴飞模式的相对运动方程,将目标机动大小作为未知量加入相对运动方程,构建不确定系统。用LQR和Lyapunov法结合的方式设计相应定点伴飞控制律。理论证明了在目标机动时该控制律仍能实现系统的渐近稳定。仿真结果验证了该控制律的有效性。     

Kink mode m = 1 in magnetic tube with discontinuous magnetic field

In this paper, we study conditions of realization and stability of kink modes with azimuthal wave numbers $m=\pm 1$ in cylindrical plasma flex with twisted magnetic field and homogeneous current along its axis. We assume permanent axial magnetic field both inside and outside the flex, surrounded by currentless plasma. Azimuthal magnetic field decreases inversely proportional to the distance from the boundary beyond the flex. We derived dispersion equations for stable and unstable modes in approximation of “thin” plasma flex. The analysis of equations has been provided for the case of discontinuous axial magnetic field on flex’s boundary. Conditions of propagation of wave modes have been defined. It was shown, that unstable modes can be implemented in certain interval of longitudinal wavenumbers. Results can be applied for the interpretation of solar magnetic tubes behavior, using measurements, provided by spacecrafts.     

Discrete time multiple spacecraft formation flying attitude optimal control in presence of relative state constraints

This paper addresses the challenge of synchronized multiple spacecraft attitude reorientation in presence of pointing and boundary constraints with limited inter-spacecraft communication link. Relative attitude pointing constraint among the fleet of spacecraft has also been modeled and considered during the attitude maneuvers toward the desired states. Formation fling control structure that consists of decentralized path planners based on virtual structure approach joint with discrete time optimal local controller is designed to achieve the mission’s goals. Due to digital computing of spacecraft’s onboard computer, local optimal controller based on discrete time prediction and correction algorithm has been utilized. The time step of local optimal algorithm execution is designed so that the spacecraft track their desired attitudes with appropriate error bound. The convergence of the proposed architecture and stability of local controller’s tracking error within appropriate upper bound are proved. Finally, a numerical simulation of a stereo imaging scenario is presented to verify the performance of the proposed architecture and the effectiveness of the algorithm.