民用飞机复合材料C型框分析方法研究

以层压板理论为基础,提出一种复合材料C型框结构的工程分析方法,并通过试验给出了C型框结构设计许用值。通过工程分析结果与试验结果的对比,说明此工程分析方法可用于指导C型框结构设计。     

国内外航空乘务员招聘比较与探讨

从国内外航空公司乘务员的招聘过程中,比较各公司对乘务员要求和待遇上的差异,分析这些差异在实际工作中的表现和产生的效果。提醒国内航空公司更多的切实的关注乘务员的综合素质和真正的价值。     

飞机刹车能量确定方法和计算公式比较

介绍了飞机机轮刹车能量确定方法,分析了不同规范估算公式的精度.结果表明,民用航空标准要求高于军用标准,按美国军用标准MIL-W-5013计算的刹车能量小约5%,提出了修改建议.     

Prediction of horizontal gas–solid flows under different gravitational fields

In this paper the performance of horizontal pneumatic conveying under different gravity environments is evaluated. An Euler–Lagrange approach validated versus ground experiments is employed to predict the relevant particle variables such as particle mass flux, mean conveying and fluctuating velocities in terrestrial, lunar and micro-gravity conditions. Gravity reduced computations predict a reduction in the global particle–wall collision frequency. Also, in the case of low wall roughness and small particle mass loading, reduction of gravity acceleration implies an increase of particle–wall collision frequency with the upper wall of the channel affecting greatly the particle mass flux profile. In the case of high wall roughness and/or high particle-to-fluid mass loading (i.e., around 1.0) particle conveying characteristics are similar in the three gravity conditions evaluated. This is due to the fact that both, wall roughness and inter-particle collisions reduce gravitational settling. However, the influence of gravity on the additional pressure loss along the channel due to the conveying of the particles is much reduced.     

本地标准时间频率的产生与保持

近年来，地方协调时UTC(BIRM)守时能力稳步提升，截至目前，UTC(BIRM)与UTC的相对频率偏差优于3E-14，时间偏差优于20ns。本文概括介绍了守时系统的组成，本地频率驾驭与主备同步技术，以及TA(BIRM)算法研究等。     

Precise coseismic displacements from the GPS variometric approach using different precise products: Application to the 2008 MW 7.9 Wenchuan earthquake

The Global Positioning System (GPS) variometric approach has emerged as an attractive alternative to traditional well-developed positioning techniques including relative positioning and precise point positioning. Previous studies have demonstrated the capability of the variometric approach to retrieve coseismic displacements at centimeter-level precision, in a real-time manner using only readily available broadcast ephemeris. This study presents the first results comparing the performance of the variometric approach by using a variety of precise satellite orbit and clock products. Totally six kinds of products are included in our evaluation, namely the broadcast, IGS (International GNSS Service) ultra-rapid (predicted), ultra-rapid (observed), rapid, final (30-s clock) and CODE (Center for Orbit Determination in Europe) final (5-s clock) products. Static and dynamic experiments are conducted using 1-Hz GPS data covering a relatively large area in China during the 2008 Wenchuan M_W 7.9 earthquake. After removing the linear trend, the displacements using broadcast, ultra-rapid (predicted), ultra-rapid (observed) and rapid products reach nearly equivalent precisions at centimeter level. By using final and CODE final products, the precision of displacements can be significantly improved from 1.9–2.0 cm to 0.4–0.7 cm horizontally, and from 6.0–6.2 cm to 1.0–1.7 cm vertically for the dynamic experiments. The displacements using the CODE final products achieve the best precision, improved by more than 40% compared to those using the IGS final products. With the availability of IGS high-rate real-time precise products, this approach is promising to capture coseismic displacements more precisely in real time, which is crucial for earthquake and tsunami early warning.     

Spatial modeling of flood probability using geo-environmental variables and machine learning models,case study: Tajan watershed,Iran

The main objective of this study was to produce flood susceptibility maps for Tajan watershed, Sari, Iran using three machine learning (ML) models including Self-Organization Map (SOM), Radial Basis Function Neural Network (RBFNN), and Multi-layers Perceptron (MLP). To reach such a goal, different physical-geographical factors (criteria) were integrated and mapped. 212 flood inventory map was randomly divided into training and testing datasets, where 148 flood locations (70%) were used for training and the remaining 64 locations (30%) were employed for testing. Model validation was performed using several statistical indices and the area under the curve (AUC). The results of the correlation matrix showed, three factors slope (0.277), distance from river (0.263), and altitude (0.223) were the most important factors affecting flood. The accuracy evaluation of the flood susceptibility maps through the AUC method and K-index shows that in the validation phase RBFNN (AUC = 0.90) outperform the MLP (AUC = 0.839) and SOM (AUC = 0.882) models. The highest percentage flood susceptibility of the area in MLP, SOM and RBFNN models is related to moderate (28.7%), very low (40%) and low (37%), respectively. Also, the validation results of the models using the Relative Flood Density (RFD) approach showed that very high class had the highest RFD value.     

国外舰载飞机着舰进近适配性评估技术研究

通过对国外舰载飞机在着舰进近下滑中的操纵需求分析,提出舰载飞机着舰进近适配性的评估要求。在评估要求的基础上针对飞机在进近适配性方面相关的特性给出相应的飞行试验方法和分析方法,初步建立舰载飞机着舰进近适配性评估技术和方法。     

On the modular approach of a 3D model of the system magnetosheath–magnetosphere

This article presents some preliminary features of a new self consistent model of the system magnetosheath–magnetosphere, recently developed in the Institute of Mechanics, Sofia, Bulgaria. The flow in the magnetosheath is governed by 3D ideal gas-dynamic equations. The positions and the shapes of the bow shock and the magnetopause are calculated iteratively as a part of the solution. These surfaces are essentially three-dimensional (generally non-axially-symmetric). The self-consistency between the regions is ensured via the boundary conditions. The magnetopause cusp indentations are formed, influencing essentially the magnetosheath flow. Prediction of the position and the shape of the bow shock for different values of the sonic Mach number are derived. Distribution of some flow parameters in the magnetosheath is presented. 3D numerical finite element model, calculating the field due to the magnetopause currents for an arbitrary magnetopause geometry, is used in the magnetosphere. The fields due to the current systems inside the magnetosphere(cross-tail current, ring current, and Birkeland current) are taken from the Tsyganenko empirical model. The magnetopause surface is calculated from the requirement the outside gas-dynamic pressure to be balanced by the magnetic pressure inside. The magnetosphere model can be viewed as an improved version of the empirical model but with more realistic magnetopause form and shielding field. Not a final but a beta version is used in this approach. The final model version as well the model details will be presented elsewhere.     

论建设学习型党组织的必要性与方法途径

建设学习型党组织是党的十七届四中全会提出的重大任务和党建的战略举措。本文阐述了建设学习型党组织的重要性和紧迫性,从六个方面剖析了建设学习型党组织的内涵,并提出了建设学习型党组织的方法和途径。