Validation on MERSI/FY-3A precipitable water vapor product

The precipitable water vapor is one of the most active gases in the atmosphere which strongly affects the climate. China's second-generation polar orbit meteorological satellite FY-3A equipped with a Medium Resolution Spectral Imager (MERSI) is able to detect atmospheric water vapor. In this paper, water vapor data from AERONET, radiosonde and MODIS were used to validate the accuracy of the MERSI water vapor product in the different seasons and climatic regions of East Asia. The results show that the values of MERSI water vapor product are relatively lower than that of the other instruments and its accuracy is generally lower. The mean bias (MB) was ?0.8 to ?12.7?mm, the root mean square error (RMSE) was 2.2–17.0?mm, and the mean absolute percentage error (MAPE) varied from 31.8% to 44.1%. On the spatial variation, the accuracy of MERSI water vapor product in a descending order was from North China, West China, Japan -Korea, East China, to South China, while the seasonal variation of accuracy was the best for winter, followed by spring, then in autumn and the lowest in summer. It was found that the errors of MERSI water vapor product was mainly due to the low accuracy of radiation calibration of the MERSI absorption channel, along with the inaccurate look-up table of apparent reflectance and water vapor within the water vapor retrieved algorithm. In addition, the surface reflectance, the mixed pixels of image cloud, the humidity and temperature of atmospheric vertical profile and the haze were also found to have affected the accuracy of MERSI water vapor product.     

基于位姿可达空间的太空机械臂容错路径规划

为了使太空机械臂在关节锁定故障后仍能继续完成后续任务,提出一种基于位姿可达空间的太空机械臂容错路径规划方法。基于牛顿-拉夫逊法计算太空机械臂关节人为限位,完成满足任务需求的退化工作空间求解,通过构造姿态可达度指标,在退化工作空间的基础上建立故障机械臂基坐标系下的位姿可达空间。通过在代价函数中增加最小奇异值代价项改进传统A^*算法,基于改进A^*算法在所建立的位姿可达空间内完成太空机械臂容错路径规划。所提方法综合了位姿可达空间与改进A^*算法各自的优势,实现了关节锁定故障太空机械臂同时满足避奇异与位姿可达要求的轨迹搜索。通过建立7自由度太空机械臂运动学模型开展数值仿真研究,仿真结果验证了所提容错路径规划方法的有效性。     

采用阵列天线的GPS接收机的多径抑制方法

提出一种新的用于阵列天线GPS接收机的多径抑制方法。考虑到通常GPS视线信号的来波方向与多径的来波方向不同,在每个导航数据符号位内测距（C/A）码重复,通过对阵列接收的信号矢量与它本身的延迟信号矢量互相关,提高接收机前端信噪比,再利用最大特征值法和前后向空间平滑技术准确地估计期望卫星视线信号（LOSS）的来波方向。最后综合多个GSC子阵列有效地降低了相关多径对码跟踪精度的影响。仿真结果显示,该方法能使接收机在与LOSS码同步前准确估计LOSS的角度信息,有效抑制相关多径,且鉴相结果准确。     

The effect of spatial truncation error on variance of gravity anomalies derived from inversion of satellite orbital and gradiometric data

The spatial truncation error (STE) is a significant systematic error in the integral inversion of satellite gradiometric and orbital data to gravity anomalies at sea level. In order to reduce the effect of STE, a larger area than the desired one is considered in the inversion process, but the anomalies located in its central part are selected as the final results. The STE influences the variance of the results as well because the residual vector, which is contaminated with STE, is used for its estimation. The situation is even more complicated in variance component estimation because of its iterative nature. In this paper, we present a strategy to reduce the effect of STE on the a posteriori   variance factor and the variance components for inversion of satellite orbital and gradiometric data to gravity anomalies at sea level. The idea is to define two windowing matrices for reducing this error from the estimated residuals and anomalies. Our simulation studies over Fennoscandia show that the differences between the 0.5°×0.5°$0.5°\times 0.5°$ gravity anomalies obtained from orbital data and an existing gravity model have standard deviation (STD) and root mean squared error (RMSE) of 10.9 and 12.1 mGal, respectively, and those obtained from gradiometric data have 7.9 and 10.1 in the same units. In the case that they are combined using windowed variance components the STD and RMSE become 6.1 and 8.4 mGal. Also, the mean value of the estimated RMSE after using the windowed variances is in agreement with the RMSE of the differences between the estimated anomalies and those obtained from the gravity model.     

A320飞机在低速滑行中滑偏的处理

A320系列飞机在运行中有时会出现低速滑行时滑偏的现象,给航班的安全、正点运行带来了很大的压力.本文分析了引起滑偏的原因,给出针对此类故障的快速处理建议及排故方法,以期节省排除此类故障的时间,对缓解航班运行压力提供帮助.     

旋翼跨音速非定常黏性绕流的高效CFD模拟方法

为提高旋翼跨音速黏性绕流CFD模拟的效率,建立了一套基于隐式LU-SGS算法和OpenMP并行策略的旋翼非定常流场高效数值求解方法。首先,基于二维剖面翼型的Poisson方程求解和网格插值、翻折方法生成绕桨叶的O-C-O型贴体正交网格,并采用高效的"扰动衍射"(Disturbance diffraction method,DDM)挖洞方法、并行化″Inverse map″(IM)的贡献单元搜索方法,构建了旋翼运动嵌套网格系统。在此基础上,以耦合S-A湍流模型的非定常RANS方程为主控方程,对流通量采用高精度的Roe-MUSCL格式进行离散,时间推进采用隐式LU-SGS双时间方法,同时采用OpenMP并行策略加速旋翼流场求解。最后,运用所建立的方法分别对悬停ONERA 7A旋翼、前飞Caradonna-Tung(C-T)旋翼无升力状态及SA349/2旋翼有升力状态的气动特性及涡尾迹特征进行了模拟,通过与试验值对比验证了文中方法在旋翼非定常流场CFD模拟中的有效性和高效性。     

LXI仪器的LAN设置及控制

在介绍了LXI仪器类型、Non Auto-MDIX含义、Agilent33220A函数发生器性能和功能的基础上,以33220A函数/任意波形发生器的LAN接口设置为例,描述了其LAN接口DHCP,Auto IP,IP Address,SubnetMask,Default Gateway,Host Name,Domain Name,DNS Server,Password等参数的含义、设置方法,介绍了充分利用其提供的接口功能,达到远程控制其输出的方法。该方法达到了通过GPIB控制函数/任意波形发生器的同样效果,利用其LAN接口组建分布式测试系统,对程序设计者具有较高的参考借鉴价值。     

Onboard orbit determination using GPS observations based on the unscented Kalman filter

Spaceborne GPS receivers are used for real-time navigation by most low Earth orbit (LEO) satellites. In general, the position and velocity accuracy of GPS navigation solutions without a dynamic filter are 25 m (1σ) and 0.5 m/s (1σ), respectively. However, GPS navigation solutions, which consist of position, velocity, and GPS receiver clock bias, have many abnormal excursions from the normal error range for space operation. These excursions lessen the accuracy of attitude control and onboard time synchronization. In this research, a new onboard orbit determination algorithm designed with the unscented Kalman filter (UKF) was developed to improve the performance. Because the UKF is able to obtain the posterior mean and covariance accurately by using the second-order Taylor series expansion through the sampled sigma points that are propagated by using the true nonlinear system, its performance can be better than that of the extended Kalman filter (EKF), which uses the linearized state transition matrix to predict the covariance. The dynamic models for orbit propagation applied perturbations due to the 40 × 40 geo-potential, the gravity of the Sun and Moon, solar radiation pressure, and atmospheric drag. The 7(8)th-order Runge–Kutta numerical integration was applied for orbit propagation. Two types of observations, navigation solutions and C/A code pseudorange, can be used at the user’s discretion. The performances of the onboard orbit determination were verified using real GPS data of the CHAMP and KOMPSAT-2 satellites. The results of the orbit determination were compared with the precision orbit ephemeris (POE) of the CHAMP and KOMPSAT-2 satellites.     

基于μC/OS-Ⅱ的串口通信在S3C2410A上的实现

文章在三星公司的嵌入式处理器S3C2410A为核心的硬件平台上,将嵌入式实时操作系统μC/OS-Ⅱ和μC/GUI在ARM9上整合实现,成功地实现了基于μC/OS-Ⅱ在S3C2410A上的双向串口通信功能。     

均匀化处理对7A55铝合金组织与性能的影响

研究了单级均匀化和双级均匀化工艺对铸态7A55铝合金组织和性能的影响规律.结果表明,经450℃单级均匀化处理后,合金中的残留共晶仍然较多,保温60h时合金中残留共晶比例由铸态合金的15.2%减少至7.2%,合金硬度由72HRB降低至60HRB,伸长率则由2.1%增大至11.2%;经450℃/60h+470℃双级均匀化处...