铸型搅动法细晶铸造对K418B合金整体涡轮组织和力学性能的影响

铸型搅动法细晶铸造使Ｋ４１８Ｂ合金整体涡轮获得了细小、均匀的等轴晶粒,改善了合金中初生ＭＣ和γ′相的分布形态,并使它们的平均尺寸减小。细晶铸造Ｋ４１８Ｂ合金整体涡轮材料在４５０～６５０℃的低周疲劳寿命至少是普通铸造的４倍。     

Development and Application of Ti-based Alloy Casting Technologies in the Field of Aerospace

Ti-based alloys have been widely applied in the aerospace field, owing to their outstanding performance. Precision casting can be used to make integrated near-net-shape components with complex thin-walled structures, which will further promote the engineering application of Ti-based alloys. In this paper, the research progress of Ti-based alloys, e.g., high-temperature Ti-based alloys, high-strength Ti-based alloys, TiAl-based alloys, Ti-based matrix composites, and their precision casting technologies are reviewed. In addition, the development directions of Ti-based alloys are presented based on the application status of Ti-based alloys in the aerospace field.     

低压高效电机冲气隙工艺研究

介绍了冲气隙工艺在高压电机中的应用。又介绍了低压高效电机冲气隙冲压工艺及模具的改进。再介绍了低压高效电机冲气隙铸铝工艺的改进。最后阐述了在低压高效电机中的应用实例,有效地解决了冲气隙工艺在中小型电机中的成功应用。这为低压高效电机转子冲片制造提供了一种先进的工艺方法。     

不稳定燃烧抑制剂对RDX—CMDB浇注推进剂的影响

对五种物质组成的七种单一或复合不稳定燃烧抑制剂在ＲＤＸ－ＣＭＤＢ（黑索今－复合改性双基）浇注推进剂中应用了研究，发现其中白刚玉（Ａｌ２Ｏ３）和ＳｉＣ对不稳定燃烧的抑制效果较佳。其加入方式和加入量地共不稳定燃烧抑制作用有较大的影响。当白刚 粒度与推进剂中燃烧催化剂的粒度相当时，其粒度变化对剂燃烧性能的影响较明显。且与其在螺压、粒铸推进剂中规律相似，即粒度减小，推进剂燃速增大。     

典型零件压铸模智能CAD系统研究

建立了典型零件压铸模智能CAD系统，分析了系统各模块的组成及功能，并阐明了系统实现的关键技术。     

星光/惯性组合制导方案与位置误差分析

根据捷联星光制导双星方案和星光/惯性组合制导基本原理,提出了一种以惯性导航为主、星光制导为辅的导弹组合导航方法。建立了组合导航位置误差计算模型。对星光惯性组合制导精度的分析表明,该法提高了对星光导航测量信息的利用度,改善了导航精度。     

目标被动定位与跟踪技术

基于精确制导技术的需要 ,本文研究了被动方式下的目标定位与跟踪技术 ,对其研究背景、研究意义、研究现状以及被动定位与跟踪问题的分类进行了详细的阐述 ,并在此基础上指出了尚待解决的一些问题。最后 ,对目标被动定位与跟踪技术的发展方向做了展望     

Algorithm and experiments of six-dimensional force/torque dynamic measurements based on a Stewart platform

Stewart platform (SP) is a promising choice for large component alignment, and interac-tive force measurements are a novel and significant approach for high-precision assemblies. The designed position and orientation (P&O) adjusting platform, based on an SP for force/torque-driven (F/T-driven) alignment, can dynamically measure interactive forces. This paper presents an analytical algorithm of measuring six-dimensional F/T based on the screw theory for accurate determination of external forces during alignment. Dynamic gravity deviations were taken into con-sideration and a compensation model was developed. The P&O number was optimized as well. Given the specific appearance of repeated six-dimensional F/T measurements, an approximate cone shape was used for spatial precision analysis. The magnitudes and directions of measured F/Ts can be evaluated by a set of standards, in terms of accuracy and repeatability. Experiments were also performed using a known applied load, and the proposed analytical algorithm was able to accu-rately predict the F/T. A comparison between precision analysis experiments with or without assem-bly fixtures was performed. Experimental results show that the measurement accuracy varies under different P&O sets and higher loads lead to poorer accuracy of dynamic gravity compensation. In addition, the preferable operation range has been discussed for high-precision assemblies with smal-ler deviations.     

基于动态数据建模的机载火控系统精度测定

现代时间序列分析方法是解决最优滤波问题的不同于Wiener滤波和Kalman滤波的方法,其基本分析方法是ARMA新息模型。而构造ARMA新息模型可归结为求MA参数。介绍了基于动态数据建模确定观测信(?)模型参数的方法,并利用某型机载火控雷达的实测数据进行系统精度测定,结果显示出快速收敛性。