索网结构非线性有限元分析中初始张力状态的快速构造方法

预应力索网结构是以柔性拉索为主要承重构件或辅助承重构件的一种结构体系,用于可展开天线等空间结构。为在有限元数值分析时准确、高效地施加张拉预应力,综合考虑索网的几何非线性、刚度矩阵奇异性、索网与支撑结构存在耦合变形等问题,利用索网式可展开天线的特性,在非线性有限元计算时忽略初位移刚度矩阵,将问题线性化,并详细介绍了以降温法模拟预应力时降温值的计算过程。此方法无需迭代,且得到的降温值在用于索网非线性计算时具有足够的精度;此方法能充分利用通用有限元计算程序,可进一步开展模态和响应等力学计算,便于在工程中实际应用。     

Precise orbit determination for TH02-02 satellites based on BDS3 and GPS observations

The Tianhui-2 02 (TH02-02) satellite formation, as a supplement to the microwave mapping satellite system Tianhui-2 01 (TH02-01), is the first Interferometric Synthetic Aperture Radar (InSAR) satellite formation-flying system that supports the tracking of BeiDou global navigation Satellite system (BDS3) new B1C and B2a signals. Meanwhile, the twin TH02-02 satellites also support the tracking of Global Positioning System (GPS) L1&L2 and BDS B1I&B3I signals. As the spaceborne receiver employs two independent boards to track the Global Navigation Satellite System (GNSS) satellites, we design an orbit determination strategy by estimating independent receiver clock offsets epoch by epoch for each GNSS to realize the multi-GNSS data fusion from different boards. The performance of the spaceborne receiver is evaluated and the contribution of BDS3 to the kinematic and reduced-dynamic Precise Orbit Determination (POD) of TH02-02 satellites is investigated. The tracking data onboard shows that the average number of available BDS3 and GPS satellites are 8.7 and 9.1, respectively. The carrier-to-noise ratio and carrier phase noise of BDS3 B1C and B2a signals are comparable to those of GPS. However, strong azimuth-related systematic biases are recognized in the pseudorange multipath errors of B1C and B3I. The pseudorange noise of BDS3 signals is better than that of GPS after eliminating the multipath errors from specific signals. Taking the GPS-based reduced-dynamic orbit with single-receiver ambiguity fixing technique as a reference, the results of BDS3-only and BDS3 + GPS combined POD are assessed. The Root Mean Square (RMS) of orbit comparison of BDS3-based kinematic and reduced-dynamic POD with reference orbit are better than 7 cm and 3 cm in three-Dimensional direction (3D). The POD performance based on B1C&B2a data is comparable to that based on B1I&B3I. The precision of BDS3 + GPS combined kinematic orbit can reach up to 3 cm (3D RMS), which has a more than 25% improvement relative to the GPS-only solution. In addition, the consistency between the BDS3 + GPS combined reduced-dynamic orbit and the GPS-based ambiguity-fixed orbit is better than 1.5 cm (3D RMS).     

耐高温复合材料在火星探测器着陆器减速伞筒盖结构上的应用

针对火星探测器着陆巡视器减速伞筒盖结构在轨运行耐温度交变、辐照等空间环境和再入过程耐温度冲击性能需求,重点开展了筒盖复合材料耐温匹配性、力学性能、耐空间环境性能以及制件成型工艺研究。结果表明,选用J-168-1胶黏剂、J-245胶黏剂及T300/QY8911复合材料制备的试件通过各项性能试验考核,均能满足筒盖结构的设计指标要求。筒盖产品力学性能稳定,成型工艺可行性良好,最高瞬时使用温度可达200℃,经历空间环境模拟后力学性能保持率均在80%以上,耐高温、耐空间环境性良好。产品已成功装星发射,并在着陆巡视器落火阶段成功弹出分离,圆满完成使命。     

激光熔化沉积15-5PH沉淀硬化不锈钢组织及拉伸性能

利用激光熔化沉积技术制备15-5PH沉淀硬化不锈钢板,利用金相显微镜(OM)、扫描电镜(SEM)、透射电镜(TEM)、电子探针(EPMA)技术,对沉积态组织进行分析,测试沉积态组织的室温拉伸性能。结果表明:激光熔化沉积15-5PH不锈钢沉积态组织由沿沉积增高方向贯穿多层外延生长的柱状晶组成,柱状晶内包含多个细长整齐排列的胞状树枝晶,枝晶内为马氏体组织,枝晶间为铁素体;沉积态组织中弥散分布大量细小的NbC析出相,尺寸12～20 nm;15-5PH不锈钢沉积态组织具有良好的力学性能,纵向抗拉强度和延伸率分别为1 128.5 MPa和14.0%,横向抗拉强度和延伸率分别为1 101 MPa和12.25%。     

非死锁合同网协议驱动的多机分布式时序任务分配

针对多无人机协同任务分配的时序约束问题，提出了基于非死锁合同网协议(DF CNP)的分布式时序任务分配方法，从理论上避免任务死锁，提升分配结果最优性。定义了局部信息条件下时序任务死锁判据，通过检测时序任务图环路状态与顶点可达性，判定分配方案的全局死锁状态，保证分配结果的可行性。定制了最近邻-深度优先混合搜索算法，在合同网排序过程中优先选择最近邻任务，并结合死锁判据递归回溯，在分布式架构下并行生成满足死锁约束的任务排序方案，提升分配结果的最优性。仿真对比结果表明：相比于非死锁遗传算法(TB GA)，DF CNP在求解效率方面具有显著优势；与耦合约束一致性束算法(CBBA TCC)相比，DF CNP结果最优性明显提升。