开关点预置三相四线SPWM逆变器研究

脉宽调制型交直交变速恒频电源采用开关点预置SPWM逆变器,该逆变器由三相桥,交流滤波器,中点形成变压器及控制、驱动电路组成。绝缘栅双极性晶体管是一种新型的电力电子器件;应用该器件为功率器件,研制了一套15kVA开关点预置SPWM逆变器。由于对电路各个部分均进行了充分分析和优化设计,实际制作的逆变器具有较小的体积、重量,并具有优越的电性能。     

飞机碱性电瓶最佳充电方式研究及其实现

应用电瓶最佳受电原理，对常用飞机碱性电瓶的充电方式进行了分析和比较，提出了脉冲恒流二阶段充电法是电瓶的最佳充电方法之一的设想，其可行性已被试验证实。利用该充电方法，研制成了飞机碱性电瓶专用充电器．实验结果表明该充电方法能大大提高电瓶的充电效率，延长电瓶的使用寿命。     

A novel architecture of electro-hydrostatic actuator with digital distribution

To address the flow imbalance rapidly of the asymmetric Electro-Hydrostatic Actuator (EHA), this paper presents a novel architecture of asymmetric EHA with the Digital Distribution (EHA-DD). It also improves the flow nonlinearity and control accuracy of the pump, especially in the low-speed condition. The digital distribution with two High-Speed on–off Valves (HSVs) not only balances flow instead of the check valves, but also replaces the pump at the low-speed to control output flow by adjusting the PWM signal. The pump and HSVs are the crucial components to control flow output. Firstly, the flow calculation models of the pump and the duty ratio inversed model of the HSV are obtained through experimental tests and the identification method. To get the control input signal for the required flow, the pump speed and PWM duty ratio for the HSVs are inversed to compensate for flow output. Further, a multimode digital flow distribution control method based on pump speed, mainly including the pump-controlled mode for large flow demand and valve-controlled mode for little flow demand, is proposed to control the accurate flow output actively. The step extension experiments based on the flow calculation models are conducted on the EHA-DD prototype under elastic, opposite varying load. The results demonstrate that the EHA-DD realizes little position error by accurate flow control, and it is also beneficial to improve the service life of the pump.     

Digital fixed-frequency hysteresis current control of a BLDC motor applied for aerospace electrically powered actuators

In the conventional cascade control structure of aerospace electrically powered actuators, the current (or electromagnetic torque) loop plays a critical role in realizing a rapid response for a digitally controlled BrushLess Direct Current (BLDC) motor. Hysteresis Current Control (HCC) is an effective method in improving the performance of current control for a BLDC motor. Nevertheless, the varying modulating frequency in the traditional HCC causes severe problems on the safety of power devices and the electromagnetic compatibility design. A triangular carrier-based fixed-frequency HCC strategy is expanded by relaxing the constraints on the rising and descending rates of the winding current to advance the capability of HCC to realize fixed-frequency modulation in the steady state. Based on that, a new flexible-bound-size quasi-fixed-frequency HCC is proposed, and the range feasible to realize fixed-frequency modulation control can cover the entire running process in the steady state. Meanwhile, a corresponding digital control strategy is designed, and four digitalization rules are proposed to extend the capacity to achieve fixed-frequency modulation control to the unsteady working state, that is, a novel fixed-frequency modulation is realized. Simulation and experimental results prove the effectiveness of this improved fixed-frequency HCC strategy.     

基于FPGA的星载步进电机控制电路设计

针对航天设备在轨运行时间长、不易更换的特点,提出了一种力矩宽且范围可调的步进电机控制电路设计。该电路原理样机以Xilinx公司的XC3S400pq-208型FPGA为核心控制芯片,以LMD18200为步进电机驱动芯片。在对电路总体设计进行介绍的基础上,重点阐述了航天过程中步进电机阻力矩增加的问题,以及通过脉冲频率和PWM控制技术调节输出力矩的方法。试验结果表明,力矩可调范围的最大值能够使力矩裕度达到4,匹配步进电机在轨运行过程中的力矩要求。     

一种模块化航空有源滤波器的研究

 航空有源滤波器(AAPF)是解决飞机供电系统中电能质量问题的一种先进方案,而模块化设计对航空有源滤波器灵活性、可维护性和可靠性的提升作用巨大。首先提出并研究了一种新型模块化航空有源滤波器,分析了主电路数学模型及其混合载波PWM(CH-PWM)调制方式;其次基于损耗对比分析进行了主电路拓扑优化,推导了模块均压控制律并给出了系统控制策略;最后进行了仿真和实验验证。结果表明,模块化航空有源滤波器能够有效补偿航空电网中由典型非线性负载产生的谐波和无功电流分量,三相电网电流的总谐波畸变率(THD)均在5%以下,补偿效果显著。     

CubeSail: A low cost CubeSat based solar sail demonstration mission

CubeSail is a nano-solar sail mission based on the 3U CubeSat standard, which is currently being designed and built at the Surrey Space Centre, University of Surrey. CubeSail will have a total mass of around 3 kg and will deploy a 5 × 5 m sail in low Earth orbit. The primary aim of the mission is to demonstrate the concept of solar sailing and end-of-life de-orbiting using the sail membrane as a drag-sail. The spacecraft will have a compact 3-axis stabilised attitude control system, which uses three magnetic torquers aligned with the spacecraft principle axis as well as a novel two-dimensional translation stage separating the spacecraft bus from the sail. CubeSail’s deployment mechanism consists of four novel booms and four-quadrant sail membranes. The proposed booms are made from tape-spring blades and will deploy the sail membrane from a 2U CubeSat standard structure. This paper presents a systems level overview of the CubeSat mission, focusing on the mission orbit and de-orbiting, in addition to the deployment, attitude control and the satellite bus.     

WANDFULH液压比例阀在多功能液压试验台设计中的应用

比较详细的介绍了世界著名的液压元件公司—WANDFULH（瑞士）的液压比例阀在流量和压力控制方面的几种不同应用,并介绍了相应的Amplifier／oontmller card sd1伺服放大控制板的电路连接和软件应用,以及液压实验台的参数、功能要求和调试过程。     

神经网络在逆变器控制中的应用

针对传统的基于最优消谐波理论的逆变器 ,应用了一种全新的神经网络控制器。当系统工作时 ,由在线神经网络实时调节逆变器输出电压的大小 ;同时各功率管的开关角由另一个神经网络通过对最优 PWM最优开关角的拟合 ,直接计算出来。整个控制系统具有结构简单、反应灵敏、调压精确、输出电能质量高且全数字化的特点。     

基于UCC2810多路输出DC/DC模块的设计

介绍了双路输出、双路闭环控制脉宽调制器UCC2810的功能和电路设计、功率转换电路设计。与单路闭环控制或间接稳压方案相比较,采用UCC2810设计的双路输出DC/DC模块,从根本上消除了交叉调整率的影响,适用于负载不平衡的应用。具有功耗低、电路设计一致性好等优点。