基于AMDAR的航路气象模型研究

提出了一种基于AMDAR的航路气象模型。该模型通过设置虚拟观测点和应用基于卡尔曼滤波的数值气象预报释用技术,融合AMDAR数据和世界区域预报系统（WAFS）发布的格点预报数据,有效提高了航路上气象要素预报的时空分辨率、精度和航路飞行效率。仿真试验表明,航路气象模型的预测性能显著优于目前使用的WAFS预报。     

Practical compensation for nonlinear dynamic thrust measurement system

The real dynamic thrust measurement system usually tends to be nonlinear due to the complex characteristics of the rig, pipes connection, etc. For a real dynamic measuring system,the nonlinearity must be eliminated by some adequate methods. In this paper, a nonlinear model of dynamic thrust measurement system is established by using radial basis function neural network(RBF-NN), where a novel multi-step force generator is designed to stimulate the nonlinearity of the system, and a practical compensation method for the measurement system using left inverse model is proposed. Left inverse model can be considered as a perfect dynamic compensation of the dynamic thrust measurement system, and in practice, it can be approximated by RBF-NN based on least mean square(LMS) algorithms. Different weights are set for producing the multi-step force, which is the ideal input signal of the nonlinear dynamic thrust measurement system. The validity of the compensation method depends on the engine’s performance and the tolerance error0.5%, which is commonly demanded in engineering. Results from simulations and experiments show that the practical compensation using left inverse model based on RBF-NN in dynamic thrust measuring system can yield high tracking accuracy than the conventional methods.     

滤波减速器有限长轮齿接触表面混合润滑分析

综合考虑了轮齿接触几何、啮合点法向载荷、齿向参数、真实表面粗糙度、润滑剂流变特性等因素,建立了滤波减速器轮齿混合润滑数值分析模型,采用复合迭代法和快速傅里叶变换(FFT)方法分别求解Reynolds方程和弹性变形方程,获得了轮齿接触表面混合润滑分析完全数值解,得到了滤波减速器在啮入点、节点和啮出点的压力与平均油膜厚度,以及转速对轮齿接触表面平均油膜厚度和接触比的影响.结果表明:在啮入点、啮出点及节点处,沿齿宽方向的压力分布不相等,两侧压力较大,而在啮入点处的两侧压力突变相对较小,且平均油膜厚度最大;对于粗糙轮齿接触表面,随着滤波减速器转速逐渐降低,啮入点、节点及啮出点的平均油膜厚度随之减小,接触比增加,润滑效果变差,并且在同一工况下粗糙轮齿接触表面的啮合点平均油膜厚度小于光滑轮齿表面的平均油膜厚度.      

Adaptive Gaussian sum squared-root cubature Kalman filter with split-merge scheme for state estimation

The paper deals with state estimation problem of nonlinear non-Gaussian discrete dynamic systems for improvement of accuracy and consistency. An efficient new algorithm called the adaptive Gaussian-sum square-root cubature Kalman filter（AGSSCKF） with a split-merge scheme is proposed. It is developed based on the squared-root extension of newly introduced cubature Kalman filter（SCKF） and is built within a Gaussian-sum framework. Based on the condition that the probability density functions of process noises and initial state are denoted by a Gaussian sum using optimization method, a bank of SCKF are used as the sub-filters to estimate state of system with the corresponding weights respectively, which is adaptively updated. The new algorithm consists of an adaptive splitting and merging procedure according to a proposed split-decision model based on the nonlinearity degree of measurement. The results of two simulation scenarios（one-dimensional state estimation and bearings-only tracking） show that the proposed filter demonstrates comparable performance to the particle filter with significantly reduced computational cost.     

Gust response analysis and wind tunnel test for a high-aspect ratio wing

A theoretical nonlinear aeroelastic response analysis for a flexible high-aspect ratio wing excited by harmonic gust load is presented along with a companion wind tunnel test. A multidisci-plinary coupled numerical calculation is developed to simulate the flexible model wing undergoing gust load in the time domain via discrete nonlinear finite element structural dynamic analysis and nonplanar unsteady vortex lattice aerodynamic computation. A dynamic perturbation analysis about a nonlinear static equilibrium is also used to determine the small perturbation flutter bound-ary. A novel noncontact 3-D camera measurement analysis system is firstly used in the wind tunnel test to obtain the spatial large deformation and responses. The responses of the flexible wing under different static equilibrium states and frequency gust loads are discussed. The fair to good quanti-tative agreements between the theoretical and experimental results demonstrate that the presented analysis method is an acceptable way to predict the geometrically nonlinear gust response for flex-ible wings.     

基于自适应差分进化算法的变循环发动机模型求解方法研究

为了降低传统迭代算法在求解变循环发动机非线性模型时对初值的依赖性,将模型的求解问题转换为求最小值的优化问题,引入差分进化算法进行模型的求解,并提出一种自适应差分进化算法(ADE)。ADE借助轮盘赌选择法,利用种群的进化经验可以自适应的选择最适合当前种群的差分策略与算法控制参数。针对变循环发动机四个典型工作点的模型求解问题,研究了标准差分进化算法(SDE)的控制参数对其性能的影响,获取了SDE在求解四个典型工作点时的最优控制参数组合,对比分析了ADE与SDE的性能差异,最后研究了种群规模对ADE性能的影响。结果表明：SDE在求解发动机模型时具有较好的鲁棒性,在求解不同工作点时算法的最优控制参数并不完全相同;相比于使用最优控制参数的SDE,ADE可以在不影响算法鲁棒性的情况下提升效率50%以上;减少ADE的种群规模会在提升算法效率的同时破坏鲁棒性。     

基于中值滤波和小波变换的混合滤波方法在推进剂监测中的应用

目前,监测传感器传出信号中混有很多噪声,为提高信号可信度,需要一种有效的信号处理方法。文章基于Matlab仿真环境,完成了信号仿真和滤波算法的设计,重点对单传感器仿真信号的去噪和多传感器信息融合进行了研究,提出了基于中值滤波和小波阈值滤波的混合滤波方案和基于Kalman滤波的信号融合方案。研究工作有:基于高斯白噪声和脉冲噪声的数学特性,合理假设出5种基本信号形式;依据实际数据,完成单传感器和多传感器信号仿真,确定信噪比和均方根误差作为去噪评定指标;综合分析现有的滤波算法的滤波特性,利用不同长度滑动窗口的中值滤波处理实验信号,选取合适长度的滑动窗口。设置对比实验确定小波阈值滤波中的小波基函数选取、阈值计算和分解尺度等参数;融合中值滤波和小波阈值滤波优势,设计混合滤波方案,去除单传感器仿真信号中的噪声;研究信息融合理论在泄漏监测系统中的应用,设置不同融合方式下的对比实验,确立最佳融合方式下的Kalman滤波方案,实现多传感器信息融合。     

含激波的湍流流动高精度大涡数值模拟方法

针对采用亚格子模型进行含激波的湍流流动模拟时会面临激波附近的精度损失问题,考虑从通过亚格子模型以及数值模拟方法两方面的改进来实现湍流流动大涡模拟的精度提高.大涡模拟采用了Yee及Sj(o)green (2009)提出的高阶低耗散方法.该方法采用自适应的流场探测器以控制计算中所需区域的数值耗散,并考虑对动力学模型采用在激波位置使用Sagaut和Germano(2005)提出的单边亚格子过滤器和(或)直接禁用亚格子项等方法加以改进.对于标准的马赫数1.5和3条件下的激波-湍流干扰问题,上述新方法相较于全区域采用亚格子模型的方法均表现出了相似的精度提升.同时实现的数值精度改进方案采用了Harten的亚单元分辨过程来定位和锐化激波,并在精确激波位置附近的网格点处采用了单边测试滤波.     

一种新的基于ANSYS的机翼挠曲变形建模方法

针对传递对准中机翼挠曲变形建模方法适用性差的问题,提出了一种基于有限元分析的不同挂点处弹载子惯导系统的机翼挠曲变形建模方法。以柔性较大的大展弦比机翼为研究对象,建立了薄蒙皮、双翼梁、多肋板式机翼模型。通过绕流分析得到的机翼上、下表面压力分布云图,在此基础上对机翼结构进行气动载荷的加载。根据ANSYS瞬态动力学分析,获取了机翼挠曲变形角的随机过程序列,并利用AR(n)模型代替ARMA(p,q)模型进行建模。采用一种改良卡尔曼滤波算法对模型参数进行估计,并利用信息准则对模型的适应性进行检验。根据参数辨识的结果,最终得到了机翼的挠曲变形模型。     

平台式重力仪航空重力测量数据后处理技术研究

针对航空重力测量对数据后处理的要求,结合平台式重力仪系统的组成与工作原理,在重力异常信号的频域特征基础上,设计出一套有严格频域规范的航空重力数据后处理流程,并对某海域实测数据进行了处理。结果表明,重力异常值内符合精度为12条东西测线达到0.43mGal/140s和0.84mGal/100s,4条南北测线达到0.39mGal/140s和0.79mGal/100s;以同测线GT-2A单次测量结果为标准值统计标准差,12条东西测线为0.72mGal/140s和0.98mGal/100s,4条南北测线为1.41mGal/140s和1.53mGal/100s。结果表明,设计的航空重力测量数据后处理方法可以实现重力异常信号的高精度提取。