数字通信系统中新型自动增益控制方法设计

设计了一个新型的自动增益控制(Automatic Gain Control,AGC)方法.针对某数字通信系统的需求,所设计的AGC可以充分利用ADC量化位数,并能够处理LTE多种传输模式(TM2和TM3)信号.仿真结果表明,本AGC能够同时适用于TM2和TM3信号,能够在充分利用ADC量化位数的同时避免过饱和现象,能够准确判断输入信号功率变化状态并迅速调整,从而对稳定功率的输入信号给出恒定的增益.     

固体火箭发动机流体喉部推力矢量特性

针对采用水作为二次流工质的流体喉部进行了冷流实验及数值模拟研究.研究了该种固体火箭发动机流体喉部的一般规律,包括不同二次流射流方式,不同二次流流量下流体喉部的扼流性能,推力偏角及推力效率,数值模拟及实验结果吻合较好.结果表明:扼流性能与二次流的注射位置、注射角度及流量比有关,且随二次流/主流流量比的增大而增大.喉部二次流喷射能有效的调节有效喉部面积进而调节推力大小,当流量比为0.4时,最大有效喉部面积比为0.8;扩张段二次流喷射能有效调节推力方向,当流量比为0.4时,最大推力偏角为20°;喉部二次流与扩张段二次流入射位置存在相位差可有效降低喉部与扩张段二次流干扰.      

基于网络编码的空间DTN中CGR改进算法

随着空间通信技术的发展,卫星节点的增多,以及容延迟容中断通信需求的不断提高,空间DTN (DelayTolerant Network,容延迟网络)环境中各通信节点间的路由技术日益重要,相继出现了多种适用于DTN的路由技术.基于空间DTN的结构与特点,对CGR(Contact Graph Routing,接触图路由)算法以及基于编码的路由算法进行了分析比较,然后针对空间DTN中CGR算法的缺点和不足,研究提出了基于NC(Network Coding,网络编码)的空间DTN中的CGR改进算法(NC-CGR),并通过仿真实验平台对算法性能进行了分析评估.仿真结果表明,相比于CGR算法,NC-CGR算法在链路传输时延、传输包裹数目、中继缓存大小、链路丢包率等不同条件下的适应性方面均表现出较大优势,更适用于具有复杂拓扑、带宽受限、高动态特性的空间DTN环境.     

不同冶炼工艺对1Cr18Ni10Ti钢夹杂物的影响

通过试验研究了1Cr18Ni10Ti不锈钢的4种冶炼工艺:真空感应+电渣重熔、真空感应(陶瓷过滤器)、真空感应(陶瓷过滤器)+电渣重熔、真空感应+真空自耗,得到钢锭中夹杂物的种类、大小以及数量的变化.对比试验结果可知,采用真空感应(陶瓷过滤器)冶炼工艺与真空感应+真空自耗之后的钢锭的夹杂物水平相当,D类夹杂物数量最少,大颗粒夹杂物占比也最小.     

分开排气式喷管喷流噪声预测及试验研究

为揭示涡扇发动机分开排气式喷管喷流噪声的频谱分布和指向特性,对喷管缩比模型远声场喷流噪声进行了预测及试验研究,并开展了全尺寸喷管基准型及锯齿型喷流噪声的预测工作。结果表明:采用Tam & Auriault方法可以预测出喷流噪声的声压级值和空间指向分布,喷流噪声具有明显的指向性。与基准型喷管相比,锯齿型喷管具有良好的降噪效果;内外涵锯齿型喷管在中低频段的降噪效果优于内涵锯齿型喷管,在高频段的降噪效果差于内涵锯齿型喷管;在本文研究参数范围内,指向角小于88°时内外涵锯齿型喷管总声压级(OASPL)值高于内涵锯齿型喷管。     

扩展酉矩阵束算法实现稀疏可重构天线阵的优化设计

针对方向图可重构天线阵列的稀疏布阵问题,提出一种基于扩展酉矩阵束算法的优化设计算法。首先建立以阵元位置和多组激励为变量的多方向图联合稀疏优化模型,并利用期望方向图采样数据构建Hankel块矩阵。然后通过centro-Hermitian化处理和酉变换将采样矩阵从复数域转换到实数域,舍弃实矩阵中较小的奇异值对可重构线阵进行稀疏。最后通过对等价矩阵束的广义特征值分解估计稀布阵元位置,进而得到每个方向图对应的激励。仿真验证了该方法能够以阵元非均匀稀疏分布的阵列形式有效实现多个方向图的精确重构。     

Day-to-day variability of equatorial anomaly in GPS-TEC during low solar activity period

The ionospheric total electron content (TEC) in the northern hemispheric equatorial ionization anomaly (EIA) crest region is investigated by using dual-frequency signals of the Global Positioning System (GPS) acquired from Rajkot (Geog. Lat. 22.29°N, Geog. Long. 70.74°E; Geom. Lat. 14.21°N, Geom. Long. 144.90°E), India. The day-to-day variability of EIA characteristics is examined during low solar activity period (F10.7∼83 sfu). It is found that the daily maximum TEC at EIA crest exhibits a day-to-day and strong semi-annual variability. The seasonal anomaly and equinoctial asymmetry in TEC at EIA is found non-existent and weaker, respectively. We found a moderate and positive correlation of daily magnitude of crest, Ic with daily F10.7 and EUV fluxes with a correlation coefficient of 0.43 and 0.33, respectively indicating an existence of a short-term relation between TEC at EIA and the solar radiation even during low solar activity period. The correlation of daily Ic with Dst index is also moderate (r = −0.35), whereas no correlation is found with the daily Kp index (r = 0.14) respectively. We found that the magnitude of EIA crest is moderately correlated with solar flux in all seasons except winter where it is weakly related (0.27). The magnitude of EIA crest is also found highly related with EEJ strength in spring (r = 0.69) and summer (r = 0.65) than autumn (0.5) and winter (r = 0.47), though EEJ is stronger in autumn than spring.     

Geostationary orbit determination using SATRE

A new strategy of precise orbit determination (POD) for GEO (Geostationary Earth Orbit) satellite using SATRE (SAtellite Time and Ranging Equipment) is presented. Two observation modes are proposed and different channels of the same instruments are used to construct different observation modes, one mode receiving time signals from their own station and the other mode receiving time signals from each other for two stations called pairs of combined observations. Using data from such a tracking network in China, the results for both modes are compared. The precise orbit determination for the Sino-1 satellite using the data from 6 June 2005 to 13 June 2005 has been carried out in this work. The RMS (Root-Mean-Square) of observing residuals for 3-day solutions with the former mode is better than 9.1 cm. The RMS of observing residuals for 3-day solutions with the latter mode is better than 4.8 cm, much better than the former mode. Orbital overlapping (3-day orbit solution with 1-day orbit overlap) tests show that the RMS of the orbit difference for the former mode is 0.16 m in the radial direction, 0.53 m in the along-track direction, 0.97 m in the cross-track direction and 1.12 m in the 3-dimension position and the RMS of the orbit difference for the latter mode is 0.36 m in the radial direction, 0.89 m in the along-track direction, 1.18 m in the cross-track direction and 1.52 m in the 3-dimension position, almost the same as the former mode. All the experiments indicate that a meter-level accuracy of orbit determination for geostationary satellite is achievable.     

粘弹性材料非局域声阻抗模型及参数优化

针对敷设粘弹性材料的刚体声散射问题提出了一种利用等效非局域阻抗基本代数模型计算表面声阻抗矩阵的方法.并以敷设粘弹性材料的球体为例,采用全局收敛移动近似算法(GCMMA, Globally Convergent Method of Moving Asymptotes)对非局域声阻抗代数模型的参数进行了优化,使其声散射计算结果与使用有限元得到的结果一致.研究表明:等效非局域阻抗基本代数模型可以应用于表面敷设粘弹性材料球体声散射的数值计算,为研究潜艇等复杂水下目标的声散射提供了有效的途径.     

三维四向编织复合材料改进模型弹性性能计算

针对三维四向编织复合材料,在改进的矩形截面单胞模型的基础上,考虑了相邻纤维束之间的界面粘结效应,推导了单胞的几何特性与编织工艺参数之间的数学关系,并且采用ANSYS软件建立了实体有限元模型,得到了等效弹性性能参数;之后,分析了各工艺参数对弹性模量的影响规律.通过有限元计算的材料弹性性能常数与试验数据符合较好,较为真实地模拟了该材料的细观结构,对三维编织复合材料的设计和工艺具有一定的参考价值.