一种地空3D-Massive MIMO信道模型

为了研究地空3D-Massive MIMO系统信道特性,提出一种基于三维单跳同心圆环散射体的地空3D-Massive MIMO信道模型。相比传统地空3D MIMO信道模型有两方面改进,首先是建立了基于单跳圆环散射体3D几何精确位置关系的球面波天线阵元相位偏移模型,其次采用生灭过程对Massive MIMO阵列上的非平稳特性进行建模。推导了该模型的信道统计特征函数,通过对特征函数理论推导值与蒙特卡洛统计值进行仿真对比,验证了理论推导正确性。此外,对所提信道模型与基于平面波的传统地空3D MIMO信道模型的空间相关性进行了分析及仿真对比,结果表明:在远场环境下,两者基本一致;在近场环境下,传统平面波模型不再适用,两者存在差异。最后,对若干组表征信道特征的仿真结果与公开文献中地空信道实际测试数据进行对比分析。表明本模型作为普遍适用性模型,可以根据信道的测试条件、测试环境和测试结果来优化参数配置以趋近于实际信道,以对特定信道进行精确建模。     

混合场积分方程在开放结构散射分析中的应用

针对复合开放闭合结构电磁散射问题的矩量法求解,通过修改混合场积分方程的建立方式,将混合场积分方程扩展应用到这类开放结构,大大提高了求解效率,数值算例证明了该方法的精度和效率。     

直升机目标的雷达特性分析

为了研究直升机目标的雷达特性,采用了理论分析、统计分析和性能指标体系分析的方法,对直升机与固定翼飞机、不同直升机之间目标的雷达特性进行了对比分析;建立了直升机的雷达特性统计模型,对统计特性结果进行了分析;采用性能指标体系分析的方法对旋翼调制特性进行了分析,得到了直升机目标的雷达特性影响因素和分布规律。其方法和结果可以作为直升机系统、防空武器系统和直升机靶标的设计参考。     

Detection of volcanic gases and particles by satellite

In this paper the detection of components of volcanic eruption has been carried out investigating, in appropriate bands of the electromagnetic spectrum (6.25, 8.7, 10.8, 12 μm), the values of the brightness temperature. The analysis has been performed in the Thermal Infrared Region (TIR) studying both the absorption–emission and scattering phenomena related to the interactions between electromagnetic radiation and volcanic emissions. The results have been achieved by means of a combined use of numerical simulations, devoted to examining the behaviour of the atmosphere gases and volcanic components, and remotely sensed satellite images. The proposed methodologies allow an estimate of the amount of gaseous and solid components, of the size of the emitted particles, of the height of the volcanic plume and of the distance of the volcanic components from the crater. The processed images come from the Spinning Enhanced Visible and InfraRed Imager (SEVIRI) sensor on board the geo-stationary satellite Meteosat Second Generation (MSG) and take into consideration an eruption of the Etna volcano as a study case (1st of April 2012, 04:30 and 05:30 UTC). The procedures are general and may therefore be extended to any other similar case.     

台阶目标电磁散射特性研究

 通过系列雷达散射截面（RCS）测试,研究了单台阶板随台阶高度变化的规律,分析了多台阶板电磁散射与其高度、间距、极化方式之间的变化关系,并将台阶板散射结果与金属平板结果进行比较,定量总结了各参数对台阶板散射的影响。试验结果表明,台阶高度增加导致散射增强;多台阶间距增大引起曲线振荡增强,说明台阶间耦合作用加强,但RCS均值相对于平板均值增幅不变;多台阶散射表现为各台阶在不同相位上相互叠加的结果。     

反舰导弹自控终点散布和命中精度估算中均匀设计的应用

通过分析影响反舰导弹自控终点精度和命中精度的因素,阐述了采用均匀设计方法制定导弹飞行试验方案,以及数据处理和结果分析的方法,介绍了在反舰导弹作战使用范围内的自控终点散布和命中精度的计算方法,最后给出了结论。     

Forest biomass monitoring with GNSS-R: Theoretical simulations

GNSS-Reflectometry (GNSS-R) is a remote sensing technique which performs bistatic measurements of the earth surface scattering. This paper presents some theoretical simulations of the specular scattering coefficient of a forested area, with the aim of demonstrating the potentiality of GNSS-R in monitoring forest biomass. The study is performed by means of an electromagnetic model developed in the past years and tested over several vegetation covered sites in its active and passive version. Here, after showing a comparison between model results and measurements over a forest site in the monostatic configuration, and after summarizing other previous validations, the extension to the specular configuration, typical of GNSS-R systems, will be presented. Namely, simulations are carried out at circular polarization and a sensitivity analysis of the received power in the specular configuration to some soil and forest parameters is shown.     

测量表面粗糙度参数的反散射计算研究

用光的角散射分布技术测量工件表面的粗糙度参数是近几年来发展起来的新的测量技术。它具有分辨力高、非接触、区域平均和快速测量等优点,可获得多个表面粗糙度参数。采用该技术测量的实验装置角分辨力为0.1°,测量范围为0.6328μm<λ_s(空间平均波长)<40μm,0.0001<△_a(轮廓的算术平均斜率)<0.0088,2nm相似文献   

局部涂敷RAM复杂目标的电磁散射特性计算

给出了平行和垂直极化平面波投射到物体时散射场的通用表达式,阐述了确定目标主要回波源位置的方法,提出选取吸波材料涂敷区域的有效方法,同时分析了局部涂敷吸波材料(RAM)的复杂目标电磁散射特性的计算,最后给出计算结果,并经验证.这种方法提高了复杂目标雷达散射截面计算的精度,适用于工程应用.     

外挂设备对飞行器电磁散射特性的影响

外挂设备会造成飞机外形的变化,从而影响隐身性能,为了研究其带来的不同角度、频率时的电磁散射特性变化趋势和规律,以有、无外挂设备飞行器电磁模型为基础,采用物理光学法,数值模拟不同频率、不同俯仰角下的RCS曲线,分析两种模型RCS曲线分布特性、俯仰角特性,其中引入RCS相对增量概念分析外挂设备影响。结果表明:头向角域,不同俯仰角下有外挂模型算术均值呈"W"型分布,而无外挂模型为倒"V"分布;周向角域,有外挂模型呈倒"V"分布;头向角域相对增量呈"W"分布,相对增量为10~25dB;周向震荡分布,为7~17dB。