水下航行体减阻技术综述

空/水跨介质飞行器经空中飞抵目标水域后高速入水,对目标实施快速打击,具有隐蔽性好、突防能力强等特点。但在水下航行中,固/液界面阻力及绕流流场变化等问题严重影响了航行速度与稳定性。减小航行体表面阻力干扰、流场优化是保障水下高速稳定航行的关键。旨在探讨适用于水下高速航行体的表面减阻与流场优化方法,对表面微结构减阻、超疏水表面减阻、超空泡减阻和微气泡减阻4种最具代表性的固/液界面减阻技术进行论述,分析各种减阻技术的机理与应用可行性,探讨适用于水下高速航行体的减阻技术发展方向。     

航天铝基复合材料零部件超精密加工技术研究

针对航天高碳化硅铝基复合材料零部件采用聚晶金刚石PCD刀具进行了超精密车削加工试验，用原子力显微镜AFM和扫描电子显微镜对其进行了检测，分析了零部件表面粗糙度值的大小及影响因素、SiCw变形破坏机理、已加工表面微观结构及加工变质层特性。结果表明，超精密车削高碳化硅铝基复合材料零部件可以获得超精密级加工表面（如Ra11．5nm）；超精密车削过程中SiC，存在着三种主要变形破坏机理：直接剪断型、拔出型和压入型，且以直接剪断型为主。直接剪断的SiCw对表面粗糙度值影响最小，而后二者是影响表面粗糙度值达到超精密级的主要障碍；超精密加工零部件表面仍会产生很薄的加工变质层。     

Ti-22Al-25Nb合金剪切旋压过程中显微组织演化

通过剪切旋压试验,研究了旋压温度(910℃和1000℃)和减薄率(0、10%和30%)对Ti-22Al-25Nb合金显微组织的影响,探讨了旋压过程中的显微组织演化规律。结果表明:Ti-22Al-25Nb(原子数分数)合金旋压组织主要由α2相、B2相和O相组成,在旋压过程中,B2晶粒沿旋轮进给方向被拉长,且伴随有动态再结晶现象发生;温度主要影响Ti-22Al-25Nb合金中α2相与O相的尺寸和形貌,随着旋压温度的升高,O相片层逐渐变短并粗化,α2相趋向等轴化;变形量主要影响α2相体积分数与O相形貌,随着减薄率的增大,α2相体积分数逐渐减少,O相从片层状转变为短棒状。因此,Ti-22Al-25Nb合金剪切旋压过程中不仅发生晶粒变形与动态再结晶现象,更涉及复杂的相变行为,组织控制困难。     

Precipitation behavior and properties of extruded 7136 aluminum alloy under different aging treatments

In this work, the mechanical properties and electrical conductivity of the extruded 7136 aluminum alloy treated by single-stage aging treatment (T6), retrogression and re-aging treatment (RRA), and multiple retrogression and re-aging treatment have been investigated by means of hardness measurements, electrical conductivity tests and tensile tests. The results have shown that the properties of the 7136 alloy such as hardness, tensile strength and electrical conductivity were sensitive to retrogression time (within 90 min). With prolonging the retrogression time, the tensile strength was enhanced first and then decreased, yet the electrical conductivity was continuously increased. The 60 min-treated alloy performed the highest tensile strength (716 MPa), whereas the 90 min-treated alloy possessed the highest electrical conductivity (33.95%IACS). Compared with the T6-treated alloy, the tensile strength and electrical conductivity were improved by 3.3% and 18.9%, respectively. The electrical conductivity showed an obvious increase with repetitious times of the RRA treatment. After 3RRA60 treatment, a good combination of tensile strength (705 MPa) and electrical conductivity (33.20%IACS) can be obtained. Compared with the T6 condition, the tensile strength and electrical conductivity were improved by 1.7% and 16.3%, respectively. The mechanism of microstructure evolution under different aging treatments has been discussed in detail.     

石墨填料对浸渗热解-熔融浸渗方法制备的C/SiC复合材料结构和性能的影响

采用石墨树脂浆料浸渍三维针刺碳毡增强体,热解后得到C/C多孔体,并采用反应熔体浸渗法制备C/SiC复合材料.研究了石墨填料对C/C多孔体的结构以及C/SiC复合材料力学性能的影响.结果 表明,石墨树脂浆料浸渍时树脂填充束间小孔形成结构致密的亚结构单元,而石墨可以有效填充胎网层等大孔隙,一次浸渍热解后碳产率有效提高.所得...     

Selective laser melting of Al–8.5Fe–1.3V–1.7Si alloy: Investigation on the resultant microstructure and hardness

This article presents the microstructure and hardness variation of an Al–8.5Fe–1.3V–1.7Si(wt%, FVS0812) alloy after selective laser melting(SLM) modification. Three zones were distinguished across the melting pool of the SLM-processed FVS0812 alloy: the laser melted zone(LMZ), the melting pool border, and the heat affected zone(HAZ) in the previously deposited area around the melting pool. Inside the LMZ, either an extremely fine cellular-dendritic structure or a mixture zone of the a-Al matrix and nanoscale Al_(12)(Fe,V)_3Si particles appeared. With a decreased laser beam scanning speed, the cellular-dendritic structure zone within the LMZ shrank significantly while the mixture zone expanded. The a-Al and Al_(12)(Fe,V)_3Si mixture zone was also observed in the HAZ, but another phase, submicron h-Al_(13)Fe_4 particles with rectangular or hexagonal shapes,formed along the melting pool border. Microhardness tests indicated that the hardness of the SLM-processed FVS0812 samples far exceeded that of the as-cast FVS0812 alloy.     

二次时效对微合金化的Al-Cu-Li 微观组织及力学性能的影响

通过常规力学性能、扫描电镜、透射电镜等测试分析方法研究了T8I6二次时效制度对Mg、Ag和Zn复合微合金化的Al-3.48Cu-1.44Li合金微观组织和力学性能的影响.结果表明,与单级时效相比,二次时效合金强度提高,而塑性略降;合金强度随第三级时效时间的延长进一步提高.最优的合金其抗拉强度(UTS)、屈服强度(YS)和延伸率分别为613.7、564.9 MPa和6.8％.合金的强化相主要为T1相,另有少量的θ'相和S'相.二次时效促进强化相,特别是T1相的二次沉淀,提高合金的强度,同时几乎不损失塑性.     

热等静压对激光选区熔化成形GH4169合金持久性能的影响

采用激光选区熔化(SLM)成形技术制备了GH4169合金,运用金相显微镜(OM)、扫描电子显微镜(SEM)、电子背散射衍射(EBSD)和透射电镜(TEM)等分析手段分析了热等静压对SLM成形GH4169合金组织及持久性能的影响规律。结果表明:沉积态合金组织中,沿沉积方向的晶粒为柱状晶,晶粒内枝晶组织细小,枝晶间分布大量Laves相;热等静压处理可有效消除组织中气孔缺陷,溶解大部分Laves相,促使组织晶粒等轴化,并减少后续980℃固溶处理过程中δ相在晶内的析出;热等静压处理能提高合金的持久寿命,但会降低合金的持久塑性。     

退火温度对Al-Mg 合金拉伸性能和显微组织的影响

通过硬度、拉伸性能测试和金相组织观察,研究了不同退火温度对含和不合Sc的Al-Mg合金组织和性能的影响.结果表明:添加Sc明显提高了Al-Mg合金的强度,抑制了合金形变组织的再结晶,高温退火后1570合金中仍弥散分布的Al3( Sc,Zr)粒子质点造成其较高的再结晶温度及拉伸性能.     

激光增材制造低合金超高强度钢的组织与力学性能研究进展

激光增材制造技术可以实现超高强度钢大型复杂关键重载构件的高性能精确成形,同时还可用于损伤零件的快速修复,在航空航天等领域的应用日益广泛.介绍了激光增材制造低合金超高强度钢的成形特性,评述了激光增材制造过程中热累积对低合金超高强度钢显微组织的影响规律,探讨了显微组织和热处理对激光增材制造低合金超高强度钢力学性能的作用机理...