一个基于WINDOWS环境的网络连接服务

该文介绍了在校园网环境及WINDOWS平台，采用TCP/IP协议设计并开发PING网络连接服务和客户机/服务器功能的VC^ 程序。     

机翼/外挂系统的颤振主动抑制研究

 本文对颤振主动抑制控制律进行了研究。研究对象为一小展弦比带外侧导弹的机翼颤振模型,模型具有外侧后缘控制面。依据该模型的全部动力特性和刚度特性,以最优控制为基础,采用动态补偿器方法,设计了两阶控制律。对该控制律进行了风洞实验验证。实验结果表明:颤振临界速度提高了14％以上。理论计算结果与实验结果一致。     

基于MOTOROLA D15手机模块的无线发送模块的设计

应用Motorola D15手机模块设计GPS系统中的无线发射部分，在硬件设计部分介绍了手机模块与微处理器的连接关系，而在软件部分介绍了AT指令、编码过程和发送过程。     

网上考试系统的设计与实现

本文讨论了一种新的考试方法———网上考试 ,并讨论了一种基于B/S系统实现网上考试的思路和设计方法 ,并对实现网上考试系统的部分关键技术进行了分析     

民机数据总线信号综合测试仪

介绍的民机数据总线信号测试仪综合了当前民机上主要采用的ARINC429、ARINC419、CSDB和RS232等数字式航空数据总线规范的接口，具有和这些总线接口设备通讯的能力，可以灵活方便地应用于机载设备检测，装机交联实验当中。     

TiAl合金不同钛铝比层片组织的稳定性

对钛铝比为１．１７４、１．１０５和１．０４１的（ＴｉＡｌ）－２．５Ｖ－１Ｃｒ（ａｔ％）合金层片组织在１３２３Ｋ热暴露中的组织变化进行了观察和分析。发现钛铝比对ＴｉＡｌ合金层片组织的稳定性和失稳分解机理有重要影响，钦铝比适当大于１：１（如１．１０５）的合金可以得到稳定性更好的层片组织。     

基于Solid Works和Cosmos的模具结构三维设计及有限元分析

复杂结构注塑模具的设计和强度、刚度分析是注塑行业的重要难题。利用Solid Works三维设计软件实现了注塑模具的三维实体建模，并运用COSMOS／Works软件对注塑模具的典型部件进行了有限元分析，验证设计的零件是否符合实际工作情况是实现注塑模具现代化设计的重要途径。通过GearTrax2001Plus、Toolbox等外挂、内挂插件的使用．大大地简化了建模过程，克服了原有设计方法的不足．为解决较复杂的结构设计和理论分析问题提供了一种新的途径。     

基于FW-H方程的旋翼气动声学计算研究

由流体力学N S方程导出的非齐次波动方程———FfowcsWilliams Hawkings方程(简称FW H方程),可以精确地描述在静止流体中运动的物体与流体相互作用的发声问题。以FW H方程为理论模型,将旋翼桨叶运动发声问题等效为包含桨叶的任意运动控制面(声源面)的声辐射问题,并在旋翼绕流Euler方程数值模拟的基础上,在时域内计算了悬停旋翼和前飞旋翼的声场。应用于UH 1H和AH 1/OLS两种旋翼模型的气动声学计算表明:计算结果与噪声实验值符合良好;所研制的程序不仅能够较准确地计算单极子噪声和偶极子噪声,而且具有较强的跨音速四极子噪声预测能力。     

Deep Impact: Working Properties for the Target Nucleus – Comet 9P/Tempel 1

In 1998, Comet 9P/Tempel 1 was chosen as the target of the Deep Impact mission (A’Hearn, M. F., Belton, M. J. S., and Delamere, A., Space Sci. Rev., 2005) even though very little was known about its physical properties. Efforts were immediately begun to improve this situation by the Deep Impact Science Team leading to the founding of a worldwide observing campaign (Meech et al., Space Sci. Rev., 2005a). This campaign has already produced a great deal of information on the global properties of the comet’s nucleus (summarized in Table I) that is vital to the planning and the assessment of the chances of success at the impact and encounter. Since the mission was begun the successful encounters of the Deep Space 1 spacecraft at Comet 19P/Borrelly and the Stardust spacecraft at Comet 81P/Wild 2 have occurred yielding new information on the state of the nuclei of these two comets. This information, together with earlier results on the nucleus of comet 1P/Halley from the European Space Agency’s Giotto, the Soviet Vega mission, and various ground-based observational and theoretical studies, is used as a basis for conjectures on the morphological, geological, mechanical, and compositional properties of the surface and subsurface that Deep Impact may find at 9P/Tempel 1. We adopt the following working values (circa December 2004) for the nucleus parameters of prime importance to Deep Impact as follows: mean effective radius = 3.25± 0.2 km, shape – irregular triaxial ellipsoid with a/b = 3.2± 0.4 and overall dimensions of ∼14.4 × 4.4 × 4.4 km, principal axis rotation with period = 41.85± 0.1 hr, pole directions (RA, Dec, J2000) = 46± 10, 73± 10 deg (Pole 1) or 287± 14, 16.5± 10 deg (Pole 2) (the two poles are photometrically, but not geometrically, equivalent), Kron-Cousins (V-R) color = 0.56± 0.02, V-band geometric albedo = 0.04± 0.01, R-band geometric albedo = 0.05± 0.01, R-band H(1,1,0) = 14.441± 0.067, and mass ∼7×10¹³ kg assuming a bulk density of 500 kg m⁻³. As these are working values, {i.e.}, based on preliminary analyses, it is expected that adjustments to their values may be made before encounter as improved estimates become available through further analysis of the large database being made available by the Deep Impact observing campaign. Given the parameters listed above the impact will occur in an environment where the local gravity is estimated at 0.027–0.04 cm s⁻² and the escape velocity between 1.4 and 2 m s⁻¹. For both of the rotation poles found here, the Deep Impact spacecraft on approach to encounter will find the rotation axis close to the plane of the sky (aspect angles 82.2 and 69.7 deg. for pole 1 and 2, respectively). However, until the rotation period estimate is substantially improved, it will remain uncertain whether the impactor will collide with the broadside or the ends of the nucleus.     

自适应直角切割网格民机增升装置绕流数值模拟

提出并介绍了基于直角切割网格的分区面搭接技术,采用变长宽比网格方法,成功地进行了存在外形间断(剪刀叉)的民机增升装置的网格生成和绕流Euler方程数值模拟.根据外形的特点,运用"根"网格分区算法,降低了整个网格的生成难度;通过基于外形的自适应网格加密技术,详细地描述了外形上的大量缝道和凹槽,提高了网格质量;在分区交界面上,利用重叠面积切割和面搭接算法实现了两侧网格间的流场信息传递,并保证了通量守恒;采用中心有限体积方法,结合双时间推进算法,完成流场的Euler方程数值模拟,计算结果与实验数据吻合良好,说明所述方法的正确性.