缠绕角度对碳/环氧厚壁管件轴压性能影响的有限元分析

建立厚壁缠绕管件的轴压有限元模型,分析相同压缩载荷条件下不同缠绕角度对管件轴压模量,径向形变和剪应力的影响,并对厚壁缠绕管件在轴压载荷下的破坏模式和部位进行了预测分析。结果表明:受轴压管件的缠绕角度宜控制在20°以内,对管件端头进行环向缠绕加强可以提高管件的轴压强度和刚度。     

韩国高性能C/C刹车盘的开发

介绍了韩国国防开发署与大宇重工合作开发的飞机C/C刹车盘的制造工艺和动力矩试验结果。韩国使用专门设计的预形体通过沥青浸渍和化学气相沉积工艺制备了具有要求的摩擦磨损性能、密度、热性能及机械性能的C/C刹车盘,在无损检测、机械加工、金属夹组装和防氧化处理等工序之后进行鉴定试验。包括动力矩试验和服役寿命试验的全部鉴定试验根据MIL—W—5013规范和洛克希德公司的GD16ZL001B规范在惯性动力仪上进行。全部鉴定试验结果显示新的刹车装置与已鉴定过的现役C/C刹车盘相比具有良好的刹车性能,达到了全部要求。     

SN 1987A and SN 1993J: Testing stellar evolution theory?

Nearby supernovae like SN 1987A and SN 1993J provide valuable constraints on the late evolution of massive stars. For this purpose, we review evolutionary models for the progenitor of SN 1987A and confront them with five observational/theoretical tests we devised. We show that single-star models (with the possible exception of rapid-rotation models) fail at least two of these tests, while two binary models (accretion and merger models) are consistent with all available constraints. We conclude that it is most likely that the progenitor of SN 1987A had a binary companion, either at the time of the explosion or at least in the not-too-distant past, and that SN 1987A should therefore not be used to calibrate single stellar evolution theory. For SN 1993J, we infer from the presupernova photometry and the early light curve that its progenitor was a 15M star that lost almost all of its hydrogen-rich envelope prior to the supernova. This seems to require that the progenitor underwent stable case C mass transfer. We discuss future observational tests of binary models for both supernovae.     

检定结果A类标准不确定度的评定方法

介绍了检定工作中检定结果A类标准不确定度的评定方法及一些应用中的问题。     

一种用于逐次逼近ADC的低电压高准确度比较器

设计了一种用于逐次逼近结构ADC中的低电压比较器,比较器由前置开关预放器和动态锁存器组成。前置放大器完成对输入信号进行放大,其高增益提高了比较器的准确度,动态锁存器的正反馈提高了比较器的速度。采用了0.6μm CMOS工艺设计,工作于2.5 V单电源电压,通过详细的电路原理分析和软件SMATSPICE的仿真,得到的分析和仿真结果说明该比较器具有速度快、准确度高、功耗小的特点,适用于逐次逼近结构中的低电压模数转换器。     

1/f波动数据的产生及其舒适感分析

为了获得使人感到舒适的自然风,提出了对风扇转速进行1/f控制的方案,详细论述了1/f波动数据的生成和对风扇电机电压的控制方法,并用单因素方差分析的方法将1/f波动控制产生的舒适感的效果与白噪和1/f 2波动控制方式的情况进行比较,证明了1/f波动控制方式对于提高人的舒适感的有效性.     

One-up on L1: Can X-rays provide longer advanced warning of solar wind flux enhancements than upstream monitors?

Observations of strong solar wind proton flux correlations with ROSAT X-ray rates along with high spectral resolution Chandra observations of X-rays from the dark Moon show that soft X-ray emission mirrors the behavior of the solar wind. In this paper, based on an analysis of an X-ray event observed by XMM-Newton resulting from charge exchange of high charge state solar wind ions and contemporaneous neutral solar wind data, we argue that X-ray observations may be able to provide reliable advance warning, perhaps by as much as half a day, of dramatic increases in solar wind flux at Earth. Like neutral atom imaging, this provides the capability to monitor the solar wind remotely rather than in situ.     

钽喷丝头的熔盐阳极氧化

采用在高温熔盐中阳极氧化的方法处理或制喷丝头，使表面生成一层硬质膜。将该种带膜钽喷丝头用于化学纤维纺丝中，取得了良好的效果。     

尖楔和半锥引起的激波／边界层干扰中相关特性研究

本文对于由尖楔和半锥等引起的后掠激波/边界层干扰中相关特性进行了实验研究。实验雷诺数Re=2.4×10~7/m,自由流马赫数Ma_∞=1.79,2.04和2.50。相关性研究的结果表明:在锥形干扰区域内,上游影响线和主分离线的斜率仅仅依赖于无粘激波强度,而无粘激波形状及湍流边界层特性对其影响不大。即在锥形干扰区域内,激波上游的流动特性主要依赖于无粘激波强度。     

军用飞机,发动机战技性能评估研究

飞机、发动机战技性能的评估,无论对于改型论证工作,或者对于新机论证和初步设计都有极其重要的意义。本文介绍了由北航研究发展的飞机/发动机一体化评估系统(简称为AEAS),以及利用AEAS对军用飞机/发动机(涡喷或涡扇发动机)组合方案战技性能评估研究的一些结果。还讨论了利用AEAS具有的优选功能,根据飞机飞行任务和战技性能要求,分别或同时对飞机/发动机系统主要设计变量(如飞机起飞推重比,翼载,机翼外形几何参数和发动机循环参数等)的各种组合进行优选,求得最佳方案的算例。使用AEAS的初步经验表明,计算结果合理,计算精度和所需CPU时间适合于飞机/发动机系统方案论证和初步设计阶段工作的需要。