航天运载器结构先进材料及工艺技术应用与发展展望

先进结构是支撑航天运载器研制及航天任务实施的基础,而先进材料与工艺技术则是先进航天运载器结构研制的重要基石.本文在简要论述航天运载器结构特点及我国发展趋势的基础上,综述了我国航天运载器结构金属材料、复合材料和智能材料的应用与发展需求,最后从超大型结构制造、整体高精高性能制造、复合材料结构制造、增材制造和绿色制造五个方面...     

夜间成像光测数字图像增强技术研究

分析夜间成像的光测数字图像灰度范围、对比度和信息量等主要特点,为图像增强的策略选择和效果评价提供依据。针对夜间成像光测数字图像灰度范围较窄等特点,提出局部灰度修正的增强方法适当增强图像对比度,又避免细节损失,同时,利用拉普拉斯锐化突出目标轮廓和边缘,并利用人眼对彩色敏感的特点,采用伪彩色增强提高对图像中模糊目标的分辨能力。通过上述3种增强技术,提高了对夜间成像暗图像的目标识别能力,有利于后续判读处理。     

Development of secondary flow field under rotating condition in a straight channel with square cross-section

The developing secondary flow fields in the entrance section of a rotating straight channel were experimentally investigated using Particle Image Velocimetry (PIV). The effects of streamwise position, Reynolds number and rotation number on the development of the secondary flow fields were revealed. The results show that the absolute values of vorticity flux of the trailing side roll cells increase with increasing radius of the measured plane and rotation number. When the absolute value of vorticity flux exceeds a critical value, the merging of the trailing side roll cells appears. Moreover, when the number of the trailing side vortex pairs is even, the absolute values of vorticity flux of the leading side vortices increase along streamwise direction. Otherwise, the absolute values decrease along the streamwise direction. By the circulation analysis, this phenomenon was found to have relationship with the merging of the trailing side roll cells, and further concluded that the secondary flow field in a rotating channel has to be treated as a whole. At last, the increase of the Reynolds number was found to be able to induce the merging position moves upstream.     

全数字宽带接收机的并行结构

介绍了一种FFT并行结构的全数字宽带接收机，接收机中包括载波恢复，定时恢复和匹配滤波器三个主要功能部分。其特点是信号处理速率比输入Nyquist采样速率低得多，而且其中的匹配滤波器和定时校正恢复可以在频域上有效地实现，这种结构特别适合于卫星通信中每秒几百兆比特速率的高速数据传输应用。     

基于边缘相似性的异源图像匹配

异源图像匹配是视觉导航、多源图像融合分析的关键步骤之一。对于成像机理差别较大的异源图像,如SAR图像和可见光图像,采用传统的异源图像匹配算法难以得到满意结果。本文提出一种基于边缘相似性的异源图像匹配方法,首先分别提取待匹配图像的边缘特征点集;然后计算基准图的边缘距离场;最后基于边缘相似性模型,通过实时图边缘图和基准图边缘距离场计算边缘相似度,寻找相似度最大的变换参数即为最终匹配参数。采用SAR与可见光图对方法进行了测试,结果表明,这种方法能够快速可靠地实现异源图像匹配。     

遥测软件标准化复用库系统的设计与实现

利用软件复用技术充分提取遥测处理的共性,构建脱离具体任务和操作系统,符合C编码规范的遥测软件标准化复用件,并形成复用库。遥测软件标准化复用库适用于多任务和多系统平台,可以充分提高软件的开发效率和质量,降低程序维护的工作量和难度,并对各测控单位开展测控应用软件标准化复用库系统的建设起到借鉴作用。     

A reflectance spectra-based approach to mapping salt fields using PCA-fused Landsat TM data

In this paper a method based on in situ measured reflectance spectra was developed for accurately mapping salt fields in the Taibei Salt Farm in Lianyungang City of East China. After radiometric correction and geometric rectification, six multispectral ETM+ bands were fused with the panchromatic band via principal components analysis (PCA). The fused data were used to map salt fields in the farm. Salt fields were mapped 91.95% correctly in comparison with ground statistics from raw multispectral bands. This accuracy level rose to 96.4% with the use of the panchromatic band (15 m resolution). However, PCA-fused data produced the highest accuracy of 98.8%. At the zone level, coarse resolution data resulted in an accuracy of 98.93% for crystallization ponds, but only 82.68% for condensation ponds. Use of the panchromatic band alone improved the accuracy for condensation ponds but decreased the accuracy for crystallization and evaporation ponds. Results derived from PCA-fused data are highly consistent with the ground statistics at a discrepancy between 0.35% for evaporation zone and 1.80% for condensation zone. It is concluded that a fine spectral resolution is important to separation of ponds of a varying salt content while a fine spatial resolution is important to their mapped area. Ponds of a lower salt content can be mapped more accurately from fused data than from raw spectral bands.     

Quality assessment by region in spot images fused by means dual-tree complex wavelet transform

This work is motivated in providing and evaluating a fusion algorithm of remotely sensed images, i.e. the fusion of a high spatial resolution panchromatic image with a multi-spectral image (also known as pansharpening) using the dual-tree complex wavelet transform (DT-CWT), an effective approach for conducting an analytic and oversampled wavelet transform to reduce aliasing, and in turn reduce shift dependence of the wavelet transform. The proposed scheme includes the definition of a model to establish how information will be extracted from the PAN band and how that information will be injected into the MS bands with low spatial resolution. The approach was applied to Spot 5 images where there are bands falling outside PAN’s spectrum. We propose an optional step in the quality evaluation protocol, which is to study the quality of the merger by regions, where each region represents a specific feature of the image. The results show that DT-CWT based approach offers good spatial quality while retaining the spectral information of original images, case SPOT 5. The additional step facilitates the identification of the most affected regions by the fusion process.     

基于Rician分布的SAR图像MRG目标提取算法

针对SAR图像特有的乘性噪声和非恒虚警统计特性很难正确提取目标的问题,本文提出了MRG算法对SAR目标进行检测。首先用MRF-ICM算法对SAR图像进行后向散射系数的复原,再在复原后的幅度上叠加相位信息后引入Rician分布寻找自适应的最佳局域Gabor滤波器参数对SAR图像进行目标提取。和以往的算法相比,MRG算法充分利用了SAR图像幅度和相位中所携带的信息,能更准确地提取目标。实验表明:该方法能取得很好的目标检测效果,后期提取出的目标更符合实际目标形态,具有较强的通用性。     

Initial design of laboratories for sustainable habitation

An effective and self-sustainable artificial habitat design is essential for human spaceflight and expansion of mankind into orbit or towards other celestial bodies. There are two approaches that need to be implemented in future sustainable habitats: the use of re-cycling technologies in order to gain experience in closed-loop processes and the primary production of resource materials using In Situ Resource Utilisation (ISRU) principles. Various products will be provided and, where applicable, recycled in such a system taking into account basic human factors requirements such as crew work load capacity, safety and well-being, namely: