液冷模块的热仿真分析

运用基于CFD的热仿真软件Flotherm对液冷模块进行了热仿真分析,分别研究了在不同环境温度,不同冷却液流量以及不同冷却液温度条件下,液冷模块内部温度场的变化规律。仿真分析结果表明,环境温度对液冷模块的温度场影响非常小;液冷模块冷却液流量的增幅与元器件温度的降幅并非正比关系;元器件温度的升幅与冷却液温度的增幅相同。     

Comparison of model and experimental ionospheric parameters at high latitudes

Modern use and study of the auroral region needs to attract a wider class of models for describing conditions of radio wave propagation in the ionosphere. In this paper the possibilities of the International Reference Ionosphere model, well-proven and widespread in the mid-latitudes, are investigated in the high latitude zone. Model and measured values of the critical frequency foF2 for two mid-latitude stations (Juliusruh and Goosebay) and four high-latitude ones (Loparskaya, Sodankyla, Sondrestrom, Thule) are compared. Deviations of medians, variations from day to day and solar activity trends seemed to be similar for both areas. This similarity is irrespective of the RZ12 index. Special attention is paid to the TEC parameter and its determination using 6 versions of models, a new version of the model IRI2010 (IRI-Plas) among them. It is shown that the IRI-Plas model significantly improves the definition of TEC in contrast to the versions of IRI2007 and the new model NeQuick. The use of the median of the experimental equivalent slab thickness, together with the current values of the TEC, increases by a factor of two the agreement between calculated and measured foF2 values as compared with the variations from day to day. This allows foF2 to be defined in near-real time.     

航空发动机总温热电偶校检问题

由于航空总温热偶气动构件的复杂性，校验问题一直悬而未决。制成后的电偶热电特性迁移，及配套特性变化强调了配套校验是必要的。本文在着重分析了以上问题后，介绍了自行研制的已获国家专利的ＳＴＴ－１Ａ系列总温热电偶校验器。     

沉淀硬化不锈钢的应用工艺探讨

阐述了沉淀硬化不锈钢（ＺＧｏＣｒ１６Ｎｉ４ＮｂＣｕ３）在铸造、热处理、无损探伤过程中易出现的问题及解决方法。     

Longitudinal behaviors of the IRI-B parameters of the equatorial electron density profiles retrieved from FORMOSAT-3/COSMIC radio occultation measurements

The electron density profiles in the bottomside F₂-layer ionosphere are described by the thickness parameter B0 and the shape parameter B1 in the International Reference Ionosphere (IRI) model. We collected the ionospheric electron density (N_e) profiles from the FORMOSAT-3/COSMIC (F3/C) radio occultation measurements from DoY (day number of year) 194, 2006 to DoY 293, 2008 to investigate the daytime behaviors of IRI-B parameters (B0 and B1) in the equatorial regions. Our fittings confirm that the IRI bottomside profile function can well describe the averaged profiles in the bottomside ionosphere. Analysis of the equatorial electron density profile datasets provides unprecedented detail of the behaviors of B0 and B1 parameters in equatorial regions at low solar activity. The longitudinal averaged B1 has values comparable with IRI-2007 while it shows little seasonal variation. In contrast, the observed B0 presents semiannual variation with maxima in solstice months and minima in equinox months, which is not reproduced by IRI-2007. Moreover, there are complicated longitudinal variations of B0 with patterns varying with seasons. Peaks are distinct in the wave-like longitudinal structure of B0 in equinox months. An outstanding feature is that a stable peak appears around 100°E in four seasons. The significant longitudinal variation of B0 provides challenges for further improving the presentations of the bottomside ionosphere in IRI.     

有限元法在光学侧窗热防护设计中的应用

光学侧窗热环境极为严酷,可采用液体对流内冷却技术对光学侧窗进行热防护。以有限元法对光学侧窗温度场进行了分析研究,研究结果表明:该方法计算精度可靠;液体对流内冷却技术能有效起到降温的作用。同时还定量的给出了冷却液用量对结构温度场的影响,为设计的经济可行性提供了保障。     

5A06铝合金超快变换极性VPTIG焊接工艺

研发了一种适用于铝合金材料的新型超快速变换变极性焊接工艺,以5A06为焊接对象,通过X射线探伤、拉伸试验、金相分析以及扫描电镜等手段对超快变换VPTIG焊接工艺进行了试验研究.试验结果表明,超快变换变极性,11G焊接工艺能够显著改善和提高5A06铝合金的焊接质量.     

主燃孔位置对基于RQL高温升燃烧室流动与燃烧特性影响的数值模拟

为将富油燃烧/快速淬熄/贫油燃烧（RQL）用于高温升燃烧室设计，以实现温升与排放的良好统一，对不同主燃孔位置下 的单头部矩形燃烧室流动、淬熄区气流混合、燃烧和排放特性进行数值模拟。结果表明：燃烧室中心回流区的长度和高度随着主 燃孔轴向距离的增大而增大。随着主燃孔轴向距离的增大，主燃孔射流深度增加，射流角度逐渐向下游偏转，导致淬熄区内气流 的混合效果减弱；随着主燃孔位置的后移，富油区内的当量比显著增大，导致CO和碳烟的生成量迅速增加，淬熄区内的沿程高温 区域面积逐渐缩小，燃烧效率逐渐降低。当X/H=0.7时，燃烧室沿程NO生成量始终处在较大值；而当X/H=0.9时，燃烧室沿程NO 生成量始终处于较小值，但CO的生成量增大。     

23NiCo钢的氢脆敏感性研究

采用电解充氢和三点慢弯曲试验方法研究了２３ＮｉＣｏ钢的淬火态以及２００℃、４５０℃、４８２℃和６００℃回火处理的试样的氢脆敏感性。结果表明，２３ＮｉＣｏ钢的氢脆抗力与组织中奥氏体的形态、分布有关。４８２℃回火，在马氏体板条边界形成薄膜状的逆转奥氏体，钢的氢脆抗力有大幅度的提高。此时，延长充氢时间（４～１０ｈ）对断裂行为没有影响。     

球载高能天文望远镜的超视距自动跟踪

本文在HAPI-4原有系统的基础上，利用80C196超16位单片机，首次实现了球载姿态指向控制系统的数字化；借助于全球卫星定位系统GPS，实现了气球位置的高精度定位和时间的绝对定标；采用小型高密度磁带机作为球载数据流存储器，利用海事卫星实现超视距测控，形成了新一代的球载高能望远镜控制系统．