机载泵源系统的恒功率H∞镇定控制策略

以机载泵源系统的恒功率控制为目标,针对作业任务中系统负载随时间变化的情况,采用使液压系统输出功率保持恒定的控制方式来达到充分利用发动机功率的目的. 对于机载泵源控制系统的主要被控对象——轴向柱塞式变量泵,建立了其状态方程和流量输出方程,采用 H_∞ 鲁棒镇定控制策略实时调节泵的排量.仿真结果表明:当负载变化时,系统能根据压力的变化快速转换到恒功率工作曲线下对应的流量状态,所设计的 H_∞ 控制器能够减小干扰和模型参数不确定对系统稳定性的影响,具有良好的鲁棒性.表明该方法用于机载液压系统可以改善系统工作性能,提高系统功率的利用率.     

GEO卫星氢镍蓄电池在轨温度波动机理分析

在某地球静止轨道通信卫星平台布局的基础上,通过合理地简化和假设建立了南蓄电池舱作为热分析计算模型,对影响蓄电池在轨温度波动的机理进行分析。分析结果表明：在冬至,西板、对地+Y板和背地+Y板受照外热流的日变化会引起其内表面温度大幅度波动,通过舱内热辐射又会引起服务舱南板等结构板内表面温度波动,而服务舱南板通过导热将引起安装其上的蓄电池温度波动,这是导致蓄电池温度波动的根本原因。     

Severe disruption of the cytoskeleton and immunologically relevant surface molecules in a human macrophageal cell line in microgravity—Results of an in vitro experiment on board of the Shenzhou-8 space mission

During spaceflight the immune system is one of the most affected systems of the human body. During the SIMBOX (Science in Microgravity Box) mission on Shenzhou-8, we investigated microgravity-associated long-term alterations in macrophageal cells, the most important effector cells of the immune system. We analyzed the effect of long-term microgravity on the cytoskeleton and immunologically relevant surface molecules. Human U937 cells were differentiated into a macrophageal phenotype and exposed to microgravity or 1g on a reference centrifuge on-orbit for 5 days. After on-orbit fixation, the samples were analyzed with immunocytochemical staining and confocal microscopy after landing. The unmanned Shenzhou-8 spacecraft was launched on board a Long March 2F (CZ-2F) rocket from the Jiuquan Satellite Launch Center (JSLC) and landed after a 17-day-mission. We found a severely disturbed actin cytoskeleton, disorganized tubulin and distinctly reduced expression of CD18, CD36 and MHC-II after the 5 days in microgravity. The disturbed cytoskeleton, the loss of surface receptors for bacteria recognition, the activation of T lymphocytes, the loss of an important scavenger receptor and of antigen-presenting molecules could represent a dysfunctional macrophage phenotype. This phenotype in microgravity would be not capable of migrating or recognizing and attacking pathogens, and it would no longer activate the specific immune system, which could be investigated in functional assays. Obviously, the results have to be interpreted with caution as the model system has some limitations and due to numerous technical and biological restrictions (e.g. 23 °C and no CO₂ supply during in-flight incubation). All parameter were carefully pre-tested on ground. Therefore, the experiment could be adapted to the experimental conditions available on Shenzhou-8.     

一种基于航摄图像特性的H.263压缩算法的改进

研究了航摄视频图像的特性,并根据航摄视频图像的特性,从预测初始搜索点、搜索策略和半像素精度运动估值方面改进了H.263标准中的运动估计算法。实验结果表明,针对航摄图像特性改进的算法比全搜索算法和三步搜索算法具有更高的搜索效率。     

Sq(H) field variations at Sonmiani geomagnetic observatory,Pakistan for solar cycle 24

In this study, Sq(H) field results for Sonmiani geomagnetic observatory (SON), Pakistan are presented first time for solar cycle i.e., Solar Cycle 24. Sonmiani observatory was established in 2008 and was included in the list of INTERMAGNET Magnetic Observatory (IMO) in 2012. The analysis of Sq(H) field is performed to examine diurnal, annual and seasonal behaviour of Sq(H) field at Sonmiani along with Honolulu which is used as reference observatory. Both the observatories lie at the Equatorial Ionisation Anomaly (EIA) crest. In general strong dependency of Sq(H) field on solar cycle has been observed. First peak of SC24 was visible in Sq(H) field at both observatories. However, at HON maximum Sq(H) was observed in 2015 instead of 2014, a year later than the year of solar maximum. Prominent longitudinal difference has been noted between both observatories. At HON, maximum Sq(H) was observed during equinox while at SON it was noted during equinox and summer as a consequence of shift in latitude of Sq focus. Phase shift of Sq(H) at SON followed a general trend, that is maximum Sq(H) shifted to later hours in solar maximum as compared to solar minimum. Whereas, an opposite trend was noted at HON which might be due to coastal effect. In case of seasonal phase shift, at both observatories maximum Sq(H) occurred at later hours in summer than in winter which is opposite to the results obtained by many workers. These points need further investigation and geomagnetic as well as wind, and electric field data of other observatories situated at the EIA crest region is required to interpret the Sq(H) phase shift extensively.     

Cross-sectional deformation of H96 brass double-ridged rectangular tube in rotary draw bending process with different yield criteria

Different yield criterion has great difference in predicting the deformation of tube with different material. In order to improve the prediction accuracy of the cross-sectional deformation of the double-ridged rectangular tube (DRRT) during rotary draw bending (RDB) process, Mises isotropic yield criterion, Hill’48 and Barlat/Lian anisotropic yield criteria commonly used in practical engineering are introduced to simulate RDB of DRRT. The inverse method combining uniaxial tensile test of whole tube and response surface methodology was proposed to identify the parameters of Hill’48 and Barlat/Lian yield criteria of small-sized H96 brass extrusion DRRT as well. Then based on ABAQUS/Explicit platform, the FE models of RDB process of DRRT considering Mises, Hill’48 and Barlat/Lian yield criteria were built. The results show that: The variation trend of cross-sectional deformation ratio is same when using different yield criteria. The cross-sectional deformation ratio by using Mises yield criterion is close to that by using Hill’48 yield criterion. However, there is a quite difference between by using Barlat/Lian yield criterion and by using Mises or Hill’48 yield criteria. The prediction values of cross-sectional height deformation by using three yield criteria all underestimate the experiment ones, and the prediction values of cross-sectional width deformation overestimate the experiment ones. By comparing the simulation results of cross-sectional deformation of the DRRT with different yield criteria and experiment ones, Barlat/Lian yield criterion is found to be suitable for describing the RDB process of DRRT.     

卫星变轨对航天扫描式TDICCD相机系统参数的影响

文章主要介绍和分析卫星变轨对TDICCD相机系统的MTF、扫描周期的影响,最后分析卫星变轨对卫星覆盖范围的影响。     

不同金属基体上W-C:H 溅射薄膜的摩擦学性能

采用非平衡磁控溅射技术在40Cr、9Cr18、GCr15、TC4及LY12等5种金属基体上沉积了钨掺杂含氢类金刚石(W-C:H)薄膜。采用Raman光谱仪、扫描电子显微镜、纳米硬度计及纳米划痕仪分别测试了薄膜的微结构、厚度、硬度及附着力,采用球-盘摩擦试验机及光学轮廓仪分别在干摩擦和PFPE脂润滑条件下评价了5种金属材料基体上薄膜的摩擦磨损性能。薄膜性能测试结果显示,该厚度为1μm的薄膜具有典型的类金刚石结构,硬度与弹性模量分别为11.56和128.34 GPa,附着力为645 m N;摩擦试验结果显示,在干摩擦条件下几种金属基体表面W-C:H薄膜的摩擦因数和磨损率差别比较显著,而在脂润滑条件下基体材料的影响较小;与干摩擦条件相比,脂润滑条件下薄膜的磨损可减少60%~75%;在干摩擦与脂润滑条件下,9Cr18与40Cr基体上的W-C:H薄膜摩擦体系分别具有最小的磨损率1.71×10-7mm3/(N·m)及4.55×10-8mm3/(N·m)。     

H.264快速帧间编码模式选择算法

为了减少H.264/AVC帧间编码模式选择的计算复杂度,利用编码模式之间的相关性以及视频序列时空域的相关性,提出了有选择性的小块搜索技术和有选择性的帧内编码模式搜索技术.模拟结果表明,该算法在保持率失真性能的前提下可以大幅度减少模式选择的计算复杂度,有利于H.264的实时应用.     

不同环境因素 对H62铜合金极化曲线的影响分析

H62铜合金的腐蚀机理可利用极化曲线研究,通过设计正交试验和单一因素影响试验,研究温度、NaCl质量分数、pH值3个因素在3种水平下对H62铜合金极化曲线的影响。采用极差分析对正交试验结果中3种因素影响大小进行讨论,基于控制变量法对单因素影响下的极化曲线进行分析,结果均表明NaCl质量分数是影响极化曲线的最大因素。