我国BPL时号的频率控制系统及结果分析

根据我国现行ＢＰＬ时号的频率控制系统,分析ＴＢＰＬ时号频率控制系统的缺陷,对目前ＢＰＬ时号的频率稳定性进行了评价,提出了一种新的频率控制方案。     

空间稳定型捷联惯导系统静态误差分析

定量分析空间稳定型捷联惯导系统的误差传播特性,以便实现惯导系统对战术技术指标及元部件对自身精度指标的设定要求.首先设计了一种用于地球表面导航的船用空间稳定型捷联惯导系统方案,然后通过求解静基座状态下的该种捷联惯导系统误差方程,分析了陀螺常值漂移以及加速度计零偏对空间稳定型捷联惯导系统的影响.理论分析以及实物试验表明陀螺常值漂移会造成经度误差随时间线性增长,其它导航信息按舒勒频率和地球频率等幅振荡传播.     

基于Ansys Icepak 的负载器热设计与热分析

基于热设计的基础理论与负载器的工作原理,应用Ansys Icepak仿真软件对供配电负载器工作过程中内部散热情况进行仿真,找出负载器内部温度最高部位,指导实际测试,避免实际测试的盲目性。另外,通过优化负载器散热孔设计,降低负载器温升值。     

两种质量多元诊断理论(英文)

工厂中,多工序、多指标系统是常见的。在该系统中推行质量控制与诊断必须考虑下列两点：上工序对下工序的影响以及指标间的相关性。由于这两点是同时存在的,使得问题更加复杂。我们需要应用张公绪教授在１９９６年提出的两种质量多元诊断理论来解决此复杂问题。本文介绍了其基本原理和具体应用,实际应用结果与理论是一致的。     

The Crab pulsar seen with AquEYE at Asiago Cima Ekar observatory

We are developing fast photon-counter instruments to study the rapid variability of astrophysical sources by time tagging photon arrival times with unprecedented accuracy, making use of a Rubidium clock and GPS receiver. The first realization of such optical photon-counters, dubbed AquEYE (the Asiago Quantum Eye), was mounted in 2008 at the 182 cm Copernicus Observatory in Asiago. AquEYE observed the Crab pulsar several times and collected data of extraordinary quality that allowed us to perform accurate optical timing of the Crab pulsar and to study the pulse shape stability on a timescale from days to years with an excellent definition. Our results reinforce the evidence for decadal stability of the inclination angle between the spin and magnetic axis of the Crab pulsar. Future realizations of our instrument will make use of the Galileo Global Navigation Satellite System (GNSS) time signal.     

GRACE gravity field modeling with an investigation on correlation between nuisance parameters and gravity field coefficients

The GRACE (Gravity Recovery And Climate Experiment) monthly gravity models have been independently produced and published by several research institutions, such as Center for Space Research (CSR), GeoForschungsZentrum (GFZ), Jet Propulsion Laboratory (JPL), Centre National d’Etudes Spatiales (CNES) and Delft Institute of Earth Observation and Space Systems (DEOS). According to their processing standards, above institutions use the traditional variational approach except that the DEOS exploits the acceleration approach. The background force models employed are rather similar. The produced gravity field models generally agree with one another in the spatial pattern. However, there are some discrepancies in the gravity signal amplitude between solutions produced by different institutions. In particular, 10%–30% signal amplitude differences in some river basins can be observed. In this paper, we implemented a variant of the traditional variational approach and computed two sets of monthly gravity field solutions using the data from January 2005 to December 2006. The input data are K-band range-rates (KBRR) and kinematic orbits of GRACE satellites. The main difference in the production of our two types of models is how to deal with nuisance parameters. This type of parameters is necessary to absorb low-frequency errors in the data, which are mainly the aliasing and instrument errors. One way is to remove the nuisance parameters before estimating the geopotential coefficients, called NPARB approach in the paper. The other way is to estimate the nuisance parameters and geopotential coefficients simultaneously, called NPESS approach. These two types of solutions mainly differ in geopotential coefficients from degree 2 to 5. This can be explained by the fact that the nuisance parameters and the gravity field coefficients are highly correlated, particularly at low degrees. We compare these solutions with the official and published ones by means of spectral analysis. It is found that our solutions are, in general, consistent with others in the spatial pattern. The water storage variations of the Amazon, Chari and Ganges river basins have also been computed. The variations computed with the NPARB approach are closer to those produced by JPL and DEOS solutions, while the variations produced with the NPESS approach are in good agreement with those produced by the CSR and GFZ solutions. A simulation study is implemented with considering realistic noise and low-frequency error. The two approaches are used to recover the true model. The NPESS solution appears closer to the true one. Therefore we are inclined to estimate the nuisance parameters simultaneously with the geopential coefficients.     

基于电阻法的工艺液位传感器测量系统及其校准装置的研制

介绍了一种基于电阻法的工艺液位传感器测量系统的设计与实现,该传感器测量系统包括利用液位传感器、点式液位传感器、耗尽关机液位传感器与剩余液位传感器及对应的变送器。设计了相应的半自动校准系统对传感器的精度进行标定,分析了测量结果的不确定度。经过测试,所有传感器各项指标均满足设计要求。该传感器的研制解决了现有容积计量及液压试验系统不能对贮箱各不同部位进行容积和高度监测的问题。     

A two-step weighted least-squares method for joint estimation of source and sensor locations: A general framework

It is well known that the Two-step Weighted Least-Squares(TWLS) is a widely used method for source localization and sensor position refinement. For this reason, we propose a unified framework of the TWLS method for joint estimation of multiple disjoint sources and sensor locations in this paper. Unlike some existing works, the presented method is based on more general measurement model, and therefore it can be applied to many different localization scenarios.Besides, it does not have the initialization and local convergence problem. The closed-form expression for the covariance matrix of the proposed TWLS estimator is also derived by exploiting the first-order perturbation analysis. Moreover, the estimation accuracy of the TWLS method is shown analytically to achieve the Cramér-Rao Bound(CRB) before the threshold effect takes place. The theoretical analysis is also performed in a common mathematical framework, rather than aiming at some specific signal metrics. Finally, two numerical experiments are performed to support the theoretical development in this paper.     

50吨级氢氧火箭发动机的设计与研制

系统性地回顾了长征五号运载火箭芯一级50t级氢氧火箭发动机YF-77的设计与研制历程。通过分析氢氧发动机的特点以及国内外氢氧发动机的发展现状,阐述了国内新一代运载火箭研发的技术路线和50t级氢氧火箭发动机的研制背景;对50t级氢氧火箭发动机的总体技术方案及其特点进行了分析与总结,并在此基础上对发动机主要组件的技术方案及其特点开展分析;对发动机热试车情况、可靠性验证情况和故障排除情况进行了分析;对50t级氢氧火箭发动机的研制情况、技术特点进行了总结,并对国内氢氧发动机和液氧/甲烷发动机的发展进行了展望。