Surface Roughness Effects on Vortex Torque of Air Supported Gyroscope

In order to improve the drift precision of air supported gyroscope, effects of surface roughness magnitude and direction on vortex torque of air supported gyroscope are studied. Based on Christensen’s rough surface stochastic model and consistency transformation method, Reynolds equation of air supported gyroscope containing surface roughness information is established. Also effects of mathematical models of main machining errors on vortex torque are established. By using finite element method, the Reynolds equation is solved numerically and the vortex torque in the presence of machining errors and surface roughness is calculated. The results show that surface roughness of slit has a significant effect on vortex torque. Transverse surface roughness makes vortex torque greater, while longitudinal surface roughness makes vortex torque smaller. The maximal difference approaches 11.4% during the range analyzed in this article. However surface roughness of journal influences vortex torque insignificantly. The research is of great significance for designing and manufacturing air supported gyroscope and predicting its performance.     

发动机喷流对飞行器底部流动影响数值模拟

针对发动机燃气喷流对底部流动的影响开展研究。建立冷喷与热喷计算方法,与经典的高压空气尾喷管喷流试验数据进行了对比,验证了本文建立的三维喷流方法的可靠性。对本文选用的飞行器外形采用冷喷与热喷方法开展了对比计算并与飞行试验值进行比较,分析了两种方法结果的差异。采用热喷方法对来流马赫数 2.5 ,不同飞行高度及喷管进口总压开展计算,研究飞行高度及喷管进口总压对发动机喷流及底部流场的影响。结果表明,保持飞行高度、来流马赫数不变,喷管进口总压增加,底部压力系数逐渐提高。燃气质量浓度最大值位于底部空腔的壁面处,且保持一个恒定值。保持喷管进口总压、来流马赫数不变,飞行高度增加,喷流高速区向后移动且中心区最大马赫数增加。在一定飞行高度下,底部压力系数由负转正,即飞行器底部会出现正推力,这对飞行器的射程会产生重要影响,需要提前评估。     

轻型高强Al-Si/SiC复合材料反射镜的制备与性能

文章采用反应烧结工艺制备 Si/SiC 材料,然后通过真空扩散渗铝工艺制备了 Al-Si/SiC 复合材料。通过精确调控浸渗合金的铝浓度使制备的Al-Si/SiC复合材料具有可控的热膨胀系数,利用该工艺制备出热膨胀系数连续可调（4.6×10-6K-1~8.7×10-6K-1,0~40℃）的 Al-Si/SiC 复合材料,其力学性能优异,经检测密度为2.86g/cm3,弹性模量为236GPa,断裂韧性为6.1MPa＆#183;m1/2,可采用线切割、铣磨、钻孔、攻丝等手段加工,相比SiC陶瓷材料更易于高精度机械加工。扫描电子显微镜分析表明,制备的Al-Si/SiC复合材料均匀、致密,光学抛光后表面粗糙度均方根值达到1.017 nm。各项测试数据表明, Al-Si/SiC复合材料作为反射镜可以满足空间光学的应用。     

涡轮排气液化循环发动机的能量分析

对涡轮排气液化循环发动机液化水的处置进行了研究。通过热力学分析获得了发动机性能的理论解,并利用热力计算进行验证。分析表明液态水直接排出发动机将导致约2%的比冲损失。分析了发动机各环节的能量传递,获得了燃烧室中心燃烧区焓增的理论表达式,可作为燃烧室性能的详细分析的基础。     

考虑刀具偏心的微铣削加工表面粗糙度预测模型研究

基于微铣削刀具轨迹建立了考虑刀具偏心、最小切削厚度的塑性材料微铣削底面粗糙度的预测模型,预测结果表明粗糙度表面形貌呈锯齿状,刀具偏心会影响表面粗糙度的形貌周期和高度,并进行微铣削加工实验,对粗糙度预测模型进行了验证。采用回归统计方法,建立了脆性材料微铣削加工表面粗糙度预测模型,对加工表面形貌进行观察,利用响应曲面法得到了各铣削用量对表面粗糙度的影响规律。     

Numerical simulation of a rotary engine primary compressor impacted by bird

In order to examine the process of a rotary engine primary compressor impacted by bird, a finite element model of a bird impacted on plate is developed with the explicit code PAM-CRASH. The smooth particles hydrodynamic (SPH) method is used to simulate the bird because of the SPH method showing no signs of instability and correctly modeling the breaking-up of the bird into particles. Good agreement between the simulation results and experimental results indicates that the numerical method of bird strike used in the present paper is reasonable. Then a rotary engine primary compressor impacted by three different configurations bird named straight-ended cylinder bird, quadrangular bird, hemispherical-ended bird are investigated using the numerical simulation method. It is found that the whole process of bird strike sustained about 3.5 ms and the bird is slashed by blade during the strike. The geometry configuration of bird affected the displacement and von Mises stress of some blades severely, just because the breaking bird’s mass is affected by the bird’s configuration. In the event of bird striking on the site of"up"some blades may develop plastic deformation and it is very adverse for the safety work of the engine.     

Detonation engine fed by acetylene–oxygen mixture

The advantages of a constant volume combustion cycle as compared to constant pressure combustion in terms of thermodynamic efficiency has focused the search for advanced propulsion on detonation engines. Detonation of acetylene mixed with oxygen in various proportions is studied using mathematical modeling. Simplified kinetics of acetylene burning includes 11 reactions with 9 components. Deflagration to detonation transition (DDT) is obtained in a cylindrical tube with a section of obstacles modeling a Shchelkin spiral; the DDT takes place in this section for a wide range of initial mixture compositions. A modified ka-omega turbulence model is used to simulate flame acceleration in the Shchelkin spiral section of the system. The results of numerical simulations were compared with experiments, which had been performed in the same size detonation chamber and turbulent spiral ring section, and with theoretical data on the Chapman–Jouguet detonation parameters.     

推广使用REM37BY电嘴

在我院使用的活塞发动机飞机中,点火系统故障率居高不下,其中又以电嘴积铅带来的发动机抖动故障居多。本文通过对比分析,以及实际监控使用的具体情况,证明了REM37BY电嘴能使这一故障大大减少,并且能节约成本,缩短工时,具有较大的推广价值。     

一种非接触光外差轮廓仪

介绍了一种纳米级非接触超高精度光外差轮廓仪。该量仪是基于普通光路的外差干涉仪,两束具有微小频差的激光束照射到制件表面:其中一束光被会聚后作为测量光针扫瞄制件表面;另一束光则被用作参考光束。这两束光经反射后形成干涉,所得信号的光程差与制件表面高度变化成正比。量仪的横向分辩力小于2μm,垂直分辩力小于1nm。制件不需要进行大的调整。制件表面同时亦被作为测量参考面。经光电转换后,信号由微机处理,从而快速完成测量、计算、显示与打印各种参数与图形。     

Multi-channel discharge characteristics cutting by ultra-fine wire-EDM

Compared with a copper wire electrode, molybdenum wire with a poor conductor is usually used as the electrode in high speed wire-cut electrical discharge machining(HSWEDM), so the resistance of an ultra-fine wire cannot be ignored. To study the differences of discharge characteristics between the ultra-fine wire and the conventional diameter wire, the continuous discharge waveform of two kinds of wire electrodes was compared. It was found that there was a multichannel discharge phenomenon in the...