Precipitation behavior and properties of extruded 7136 aluminum alloy under different aging treatments

In this work, the mechanical properties and electrical conductivity of the extruded 7136 aluminum alloy treated by single-stage aging treatment (T6), retrogression and re-aging treatment (RRA), and multiple retrogression and re-aging treatment have been investigated by means of hardness measurements, electrical conductivity tests and tensile tests. The results have shown that the properties of the 7136 alloy such as hardness, tensile strength and electrical conductivity were sensitive to retrogression time (within 90 min). With prolonging the retrogression time, the tensile strength was enhanced first and then decreased, yet the electrical conductivity was continuously increased. The 60 min-treated alloy performed the highest tensile strength (716 MPa), whereas the 90 min-treated alloy possessed the highest electrical conductivity (33.95%IACS). Compared with the T6-treated alloy, the tensile strength and electrical conductivity were improved by 3.3% and 18.9%, respectively. The electrical conductivity showed an obvious increase with repetitious times of the RRA treatment. After 3RRA60 treatment, a good combination of tensile strength (705 MPa) and electrical conductivity (33.20%IACS) can be obtained. Compared with the T6 condition, the tensile strength and electrical conductivity were improved by 1.7% and 16.3%, respectively. The mechanism of microstructure evolution under different aging treatments has been discussed in detail.     

Stationary non-Gaussian random vibration control: A review

This paper presents a review of the various methods for the stationary non-Gaussian random vibration control. Random vibration tests can be divided, according to the number of exciters, in single-shaker tests and multiple-shaker tests. In the stationary non-Gaussian random vibration test, the time and frequency domain characteristics of the responses should be controlled independently and simultaneously. Skewness and kurtosis are usually selected as the non-Gaussian time control references (targets) while power spectral density is the frequency domain control procedure before it recalls the concepts of non-Gaussianity. Then, the generation of a one frame stationary non-Gaussian random signal for both the single and multiple shakers are reviewed. The commonly used methods for the single non-Gaussian random signal generation in the random vibration test are memoryless nonlinear transformation, phase modification and Filtered Poisson process. For the multiple-shaker case, the sequential phase modification and memoryless nonlinear transformation are used to generate one frame coupled multi-channel non-Gaussian random signal. In order to obtain a stationary and consecutive dynamic input, the time domain randomization procedure is introduced with high computational efficiency and its influences on the skewness and kurtosis are analyzed. Finally, two existing problems in the non-Gaussian random vibration control are addressed.     

导弹动力系统最佳预防维修周期的数字仿真

导弹武器系统中有很多是多次使用的可修复杂系统。对于这种复杂系统，尤其是其寿命周期，预防维修时间及事后维修时间为离散分布时，其最佳预防维修周期难以用一般方法求得。针对这种情况，本文利用蒙特卡罗随机模拟法建立了系统计算模型，并通过模拟计算，得出了最佳预防维修周期的数字仿真结果。此结果可为制定导弹武器最佳修复策略提供依据。     

Noise analysis of continuous GPS coordinate time series for CMONOC

The Crustal Movement Observation Network of China (CMONOC) is one of the major scientific infrastructures, mainly using Global Positioning System (GPS) measurements, to monitor crustal deformation in the Chinese mainland. In this paper, decade-long coordinate time series of 26 continuous GPS sites of CMONOC are analyzed for their noise content using maximum likelihood estimation (MLE). We study the noise properties of continuous GPS time series of CMONOC for the unfiltered, filtered solutions and also the common mode signals in terms of power law plus white noise model. In the spatial filtering, we remove for every time series a common mode error that was estimated from a modified stacking of position residuals from other sites within ∼1000 km of the selected site. We find that the common mode signal in our network has a combination of spatially correlated flicker noise and a common white noise with large spatial extent. We demonstrate that for the unfiltered solutions of CMONOC continuous GPS sites the main colored noise is a flicker process, with a mean spectral index of ∼1. For the filtered solutions, the main colored noise is a general power law process, indicating that a major number of the filtered regional solutions have a combination of noise sources or local effects. The velocity uncertainties from CMONOC continuous GPS coordinate time series may be underestimated by factors of 8–16 if a pure white noise model is assumed. In addition, using a white plus flicker noise model, the median values of velocity errors for the unfiltered solutions are 0.16 (north), 0.17 (east) and 0.58 (vertical) mm/yr, and the median values for the filtered solutions are 0.09 (north), 0.10 (east) and 0.40 (vertical) mm/yr.     

新型免抬式电动刀架的研究

本文介绍了一种ＣＮＣ机床新型免抬式电动刀架的机械结构及控制电路。该电动刀架采用梯形螺柱螺套副升降机构，可使刀架转位分度时无需抬起上刀体。刀架转位分度采用机－ 电结合的方法，即先在控制电路中使用霍尔元件进行粗定位，再在机械上采用三齿盘实现精定位。     

Load distribution strategy for multi-lift system with helicopters based on power consumption and robust adaptive game control

It is of great significance to reasonably distribute the slung load to each helicopter while considering difference in power consumption, relative position and interaction comprehensively. Therefore, the load distribution strategy based on power consumption and robust adaptive game control is proposed in this paper. The study is on a “2-lead” multi-lift system of four tandem helicopters carrying a load cooperatively. First, based on the hierarchical control, the load distribution problem is divided into two parts: the calculation of expected cable force and the calculation of the anti-disturbance cable force. Then, aimed at minimizing the maximum equivalent power of helicopter, an optimization problem is set up to calculate the expected cable force. Specially, the agent power model is trained by BP neural network, the safe distance constraint between helicopters is set to 2.5 rotor diameters to reduce aerodynamic interference, and the helicopters with different performance can be considered by introducing the equivalent power factor into the objective function. Next, considering the difference and interaction between helicopters, the robust adaptive differential game control is proposed to calculate the anti-disturbance cable force. Particularly, to solve the coupled Hamiltonian equations, an adaptive solving method for value function is proposed, and its stability is proved in the sense of Lyapunov. The simulation results indicate that the proposed load distribution method based on power consumption is applicable to the entire flight trajectory even there are differences between helicopters. The game control can consider interaction between helicopters, can deal with different objective functions, and has strong robustness and small steady-state error. Based on the entire strategy, the cable force can be reasonably allocated so as to resist disturbance and improve the flight performance of the whole system.     

双燃式冲压发动机中超燃燃烧室冷态流场数值模拟

采用Ｍａｃ Ｃｏｒｍ ａｃｋ 矢通分裂格式, 求解雷诺平均的Ｎ－Ｓ方程组, 采用Ｂａｌｄｗ ｉｎ－Ｌｏ－ｍ ａｘ 代数湍流模型和混合长度模型, 模拟超燃燃烧室内两股平行超声速来流的冷态流场, 取得了与试验相一致的结果, 计算表明回流区和射流流动参数对超燃燃烧室流场内波系的变化有着较大的影响。     

发烟机动力装置的试验研究

简要介绍了发烟机及其动力装置,研究并改进了ＷＱＪ－１型小型航空发动机,使之成为满足发烟要求的动力装置。确定了该发动机在新状态下的参数及结构,进行了发烟机的雾油发烟实验,得到了雾油发烟对发动机的影响及影响程度。实验结果表明：将ＷＱＪ－１型小发动机改为发烟机动力装置是可行的。对发烟机的型号研制和扩展小型航空发动机的使用范围有积极促进作用。     

某直升机专用交流地面电源车PSPICE模型仿真分析

针对某直升机专用交流地面电源车系统,建立了PSPICE软件的仿真模型,且进行了系统仿真,研究了基于独立源及受控源的SPWM波产生方法,分析了滤波器参数分布对于系统性能的影响。仿真结果表明该电源系统对于雷达、吊声类冲击性负载有较好的适应性。     

一种空间超大型可展开柔性聚光器

面向空间太阳能电站（SSPS）对大口径太阳能聚光器的应用需求,提出一种超大型、轻量化、高精度的空间可展开柔性聚光器的新构型。采取理论建模、计算仿真、优化设计相结合的方法对其抛物面构型原理、展开机构折展原理、展开态结构稳定性、动态聚焦精度等问题进行研究,并完成大口径可展开柔性聚光器的设计。提出了基于多层弹性花瓣镜体复合结构的大口径柔性聚光器优化创新设计方法。由于采用薄板柔索结构,本聚光器具有精度高、展收体积比大、质量轻、在线控制简单等优点,为空间太阳能电站千米级聚光器提供一种创新设计方法。