Abnormal Shape Mould Winding

为解决网格化芯模的缠绕问题,本文提出了复合材料面片缠绕机理;接着详细分析了面片缠绕过程中的芯模凹曲面上纤维滑线和架空现象,应用微分几何曲面理论和空间几何理论,提出判据及其解决方案;最后,针对飞机发动机进气道的缠绕成型,编制缠绕控制程序并进行相应的实验,验证了面片缠绕方法的可行性。     

利用试验设计法建立翼型气动特性的人工神经网络模型

建立了翼型气动特性预测的BP(Back Propagation)神经网络模型,重点研究了3种选取训练样本的试验设计(DOE)法:完全析因法、正交设计法和均匀设计法,对BP神经网络预测精度的影响,利用所建立的BP神经网络对FX63-137翼型几何型线进行了优化设计。研究结果表明:在因素数和水平数较少时,完全析因法、正交设计法及均匀设计法的平均测试误差分别为0.002%、0.029%、0.023%;在因素和水平数较多时,完全析因法的样本规模太大而不再适合,正交设计法和均匀设计法的平均测试误差分别为0.42%和0.15%,均匀设计法的预测精度更高,更适合于翼型气动特性预测的人工神经网络模型。优化后翼型的升阻比在迎角为0°~18°范围内均高于原始翼型,在迎角为1°、4°和15°时升阻比分别提高了4.38%、1.38%和5.51%。该研究方法及成果可以应用于翼型的多参数优化设计。     

Initial ground experiments of silkworm cultures living on different feedstock for provision of high quality animal protein for human in space

Silkworm could be an alternative to provide edible animal protein in Controlled Ecological Life Support System (CELSS) for long-term manned space missions. Silkworms can consume non-edible plant residue and convert plant nutrients to high quality edible animal protein for astronauts. The preliminary investigation of silkworm culture was carried out in earth environment. The silkworms were fed with artificial silkworm diet and the leaves of stem lettuce (Lactuca sativa L. var. angustana Irish) separately and the nutritional structure of silkworm was investigated and compared, The culture experiments showed that: (1) Stem lettuce leaves could be used as food of silkworm. The protein content of silkworm fed with lettuce leaves can reach 70% of dry mass. (2) The protein content of silkworm powder produced by the fifth instar silkworm larvae was 70%, which was similar to the protein content of silkworm pupae. The powder of the fifth instar silkworm larvae can be utilized by astronaut. (3) The biotransformation rate of silkworm larvae between the third instar and the fifth instar could reach above 70%. The biotransformation cycle of silkworm was determined as 24 days. (4) Using the stem lettuce leaves to raise silkworm, the coarse fiber content of silkworm excrements reached about 33%. The requirements of space silkworm culture equipment, feeding approaches and feeding conditions were also preliminarily designed and calculated. It is estimated that 2.2 m³ of culture space could satisfy daily animal protein demand for seven astronauts.     

A proposal on the test of general relativity by clock transportation experiments

We propose a test of the gravitational time dilation in general relativity by long term clock comparison between two stations separated in height. The geopotential difference between the two National time keeping centers in China, Lintong (A)$(A)$ and Beijing (B)$(B)$ is around 4000 geopotential unit, which corresponds to the height difference of 400 m. Two clocks _CA$C_A$ and _CB$C_B$ are fixed at stations A and B, respectively, which are synchronized at beginning by a portable clock C in a short time period with go-back synchronization approach. After one month, the clock C is again transported between A and B  , comparing the records of the keeping time by clocks _CA$C_A$ and _CB$C_B$, respectively. Calculations show that, after one month, the difference of the time durations between the clocks _CA$C_A$ and _CB$C_B$ is around 121 ns, if general relativity is correct.     

考虑FDR的测试性测定试验及其相关方法

针对装备研制过程中,缺乏试验手段测定产品测试性水平,确定其与规定要求间的差距的情况,界定了测试性试验和测试性测定试验的概念,在仅考虑测定故障检测率(FDR,Fault Detection Rate)的情况下,研究给出了基于功能相关特征矩阵和重要度特征的故障特征建模方法,构建了二元组故障特征模型,用于测定FDR试验的试验样本选取.在该种试验样本选取方法中,为了减少进行故障注入试验时,注入不同故障样本的工作量和复杂度,充分考虑了试验样本间的等效关系,定义了等价集合和等效样本的概念,并在此基础上给出了考虑等效样本存在的试验结果评估方法.该研究在某型导弹飞控系统中取得了很好的应用.      

旋翼式火星无人机技术发展综述

火星表面稀薄的大气环境为旋翼式无人机在火星低空飞行提供了必要的条件。概述了火星无人机的研究背景、飞行环境与研制难点；整理了世界范围内各研究机构研制的旋翼式火星无人机的技术特点；梳理旋翼式火星无人机研究在气动特性理论、低气压飞行控制、系统集成等方面的关键技术；总结旋翼式火星无人机的仿真研究与实验研究成果；对火星无人机未来的发展趋势进行展望。     

基于Kriging模型的翼型多目标气动优化设计研究

在翼型气动优化设计中引入Kriging代理模型,发展了一套高效、稳定的气动优化设计程序。采用拉丁超立方试验设计方法在设计空间内构造一系列样本点,通过求解二维可压缩的雷诺平均NS方程（RANS）得到其响应值来建立初始Kriging模型。优化设计采用Hicks-henne函数对翼型几何外形进行参数化表示,以阻力极小化为设计目标,考虑面积、升力、力矩等约束条件,通过算例证明,发展的优化设计方法不仅可行,而且具有高效稳定的特性。与传统的优化设计方法比较,大大减少了设计时间。     

冲角对涡轮低压导向器气动特性影响的实验研究

本文实验研究了通过前置可调导叶改变来流气流方向对涡轮低压导向器环形叶栅损失的产生与分布的影响, 以及在沿叶高不同分布的冲角下模型叶栅气动特性的变化。在不同的沿叶高分布的进气冲角下, 详细地测量了导向器出口流场和叶栅表面静压分布, 得出导向器总流动损失随平均冲角的变化, 从而确定了对应最小流动损失的冲角范围, 对导向器的变工况性能做出了评价。      

浅谈数学实验与物理教学的关系

本文从数学实验的角度着手，以傅立叶级数和曲线族的包络实验为例，从一个侧面探讨数学教学与物理教学之间的关系。为高校的教学改革提供了新的视角。     

k-ω SST两方程湍流模型中参数影响的初步分析

Menter的k-ωSST两方程湍流模型在流体力学计算中有良好表现。利用均匀试验设计方法对k-ωSST模型中八个参数在小攻角亚声速、跨声速和大攻角三种典型的翼型绕流流场计算中的影响规律进行了分析。分析结果表明在附着流中参数a1是对流场的影响最大的参数;而在分离流中,参数a1对流场的影响与湍流产生与耗散等项的作用相当,模型中的四个参数:σω2、β2、β*和a1的取值都会对计算结果有较大的影响。