触点接触电阻的动态检测

定时器、继电器等电器靠触点闭合来控制电器系统的电流、电压或定时时间。这时，触点闭合时的接触电阻对电器的电气性能有很大影响，因而触点接触电阻是这类电器的重要技术参数。目前，企业中仍普遍采用手工、静态、抽检法来测量这一参数。这不仅检测效率低，而且与动态使用状况不一致。我们研制了触点电阻动态检测系统，大大提高了检测效率，并使动态检测与使用状态一致，对保证定时器、继电器等的可靠性有重要意义。     

发动机故障的数值模拟及模式分析

针对发动机的邦联特点，提出了其工作状态过渡的非线性动态数学模型。利用随机模拟结果，对发动机的邦联特性进行了简单分析。     

空间对接机构技术及其研制

给出了空间对接机构的传动缓冲、捕获、连接密封、结构与附件，以及控制等子系统的组成和功能，阐述了对接和分离基本过程。以及其中的备份操作。分析了对接机构的总体设计、动力学仿真、部件研制和地面试验等关键技术。     

基于特征的雷达信号环境仿真

通过分析装备的试验需求,解析雷达信号环境的特征,提出了具有针对性、适应性、可扩展性和层次化的雷达信号环境仿真策略。对实践应用具有较强的参考性。     

Transient simulation of a differential piston warm gas self-pressurization system for liquid attitude and divert propulsion system

In order to obtain the dynamic characteristics of a differential piston warm gas selfpressurization system for liquid attitude and divert propulsion system, a transient model is developed using the modular modeling method. The system includes the solid start cartridge,pressure-amplified tank with liquid monopropellant, liquid regulator, gas generator, and pipes.The one-dimensional finite-element state-variable model is applied to the pipes and the lumped parameter method is adopted for the other modules. The variations of the system operation parameters over time during the startup, steady-state, and pulsing operational processes are obtained from the transient model, and the characteristics of starting time changing with different system parameters are also analyzed. It is shown that the system startup process can be divided into three distinct processes. The starting time monotonically changes with variations of the liquid regulator parameters, first decreasing and then increasing with the mass change of the solid propellant charge of the start cartridge, initial gas cavity volume of the pressure amplified tank and initial gas cushion of the propellant tank. The starting time can be reduced to less than 1.0 s(0.68–0.75 s for the current system). For meeting the deviation requirements of ±10% of the steady-state propellant tank pressure, the positive deviation requirement is assured by the self-locking pressure and the negative deviation can be assured within an allowable maximum propellant tank volume flowrate(1.6 times the design value for the proposed system) for downstream thrusters for a designed system. The results from the simulation are useful as a guide for further system design and testing.     

Motion prediction of a non-cooperative space target

Capturing a non-cooperative space target is a tremendously challenging research topic. Effective acquisition of motion information of the space target is the premise to realize target capture. In this paper, motion prediction of a free-floating non-cooperative target in space is studied and a motion prediction algorithm is proposed. In order to predict the motion of the free-floating non-cooperative target, dynamic parameters of the target must be firstly identified (estimated), such as inertia, angular momentum and kinetic energy and so on; then the predicted motion of the target can be acquired by substituting these identified parameters into the Euler’s equations of the target. Accurate prediction needs precise identification. This paper presents an effective method to identify these dynamic parameters of a free-floating non-cooperative target. This method is based on two steps, (1) the rough estimation of the parameters is computed using the motion observation data to the target, and (2) the best estimation of the parameters is found by an optimization method. In the optimization problem, the objective function is based on the difference between the observed and the predicted motion, and the interior-point method (IPM) is chosen as the optimization algorithm, which starts at the rough estimate obtained in the first step and finds a global minimum to the objective function with the guidance of objective function’s gradient. So the speed of IPM searching for the global minimum is fast, and an accurate identification can be obtained in time. The numerical results show that the proposed motion prediction algorithm is able to predict the motion of the target.     

沉淀硬化不锈钢的应用工艺探讨

阐述了沉淀硬化不锈钢（ＺＧｏＣｒ１６Ｎｉ４ＮｂＣｕ３）在铸造、热处理、无损探伤过程中易出现的问题及解决方法。     

两类激波捕捉格式的性能分析

考虑了两类典型的激波捕捉格式:特征形式的MUSCL(Monotone Upstream-centred Schemes for Conservation Laws)格式和WENO(Weighted Essentially Non-Oscillatory)格式.MUSCL格式在作特征变换时使用了局部线性化的思想,并且针对波系的性质施加相应的限制器;通过逐维重构实现有限体积法的WENO格式.针对一维、二维和三维Euler系统进行数值实验.在一维和二维的情况下,特征形式的MUSCL格式在接触间断的捕捉上具有较明显的优势,而对于激波的捕捉则差别不大.对于三维问题则是WENO格式对流场的分辨更精细.最后对上述结果给出解释,并且提出了可能的改进方法.     

主燃孔位置对基于RQL高温升燃烧室流动与燃烧特性影响的数值模拟

为将富油燃烧/快速淬熄/贫油燃烧（RQL）用于高温升燃烧室设计，以实现温升与排放的良好统一，对不同主燃孔位置下 的单头部矩形燃烧室流动、淬熄区气流混合、燃烧和排放特性进行数值模拟。结果表明：燃烧室中心回流区的长度和高度随着主 燃孔轴向距离的增大而增大。随着主燃孔轴向距离的增大，主燃孔射流深度增加，射流角度逐渐向下游偏转，导致淬熄区内气流 的混合效果减弱；随着主燃孔位置的后移，富油区内的当量比显著增大，导致CO和碳烟的生成量迅速增加，淬熄区内的沿程高温 区域面积逐渐缩小，燃烧效率逐渐降低。当X/H=0.7时，燃烧室沿程NO生成量始终处在较大值；而当X/H=0.9时，燃烧室沿程NO 生成量始终处于较小值，但CO的生成量增大。     

超细磨粒砂轮修整后表面轮廓特征的实验研究

本文以不同的修整条件修整砂轮,用表面粗糙度仪测量砂轮表面轮廓曲线数据,通过FFT软件分析其频谱变化.实验结果表明,当修整深度较小时,砂轮表面出现明显的修整特征频率;当修整深度增大时,修整特征频率不明显.而修整进给率较小时,修整特征频率不明显;当修整进给率较大时,砂轮表面出现明显的修整特征频率.