工艺模型驱动的物料动态精准配送技术

针对飞机装配车间传统“领料式”物料配送存在的弊端,提出了一种工艺模型驱动的物料动态精准配送方法,构建了飞机装配车间物料精准配送管理系统,阐述了系统构建涉及的关键技术难点,采用基于模型的三维可视化消耗式BOM重构方式,建立与设计了模型动态同步精准的MBOM工艺模型,利用RFID技术的优点实时获取物料信息,通过iGPS系统引导AGV物料运输平台来实现装配站位物料的高精度配送。     

火星车转移坡道柔顺性优化设计及动力学分析

对一种抽展式火星车转移坡道开展柔顺性优化设计和动力学分析。首先，分析火星车与存在异面角的坡道的挤压几何原理。然后，设计坡道的间隙机构和限位机构，并计算出机构关键设计参数的最优值，以自适应调整两侧坡道的距离，〖JP2〗减小火星车与坡道护栏之间的相互作用力。最后，对坡道下落过程和火星车在坡道上的行驶过程进行动力学仿真，验证坡道柔顺性优化设计的效果。结果表明：优化后的坡道柔顺性大幅提高，坡道可以自适应调整两侧的距离；使用优化后的坡道，可以有效降低火星车与坡道护栏的作用力，实现火星车在坡道上的安全行驶。     

A new modeling scheme for powered parafoil unmanned aerial vehicle platforms: Theory and experiments

A novel framework is established for accurate modeling of Powered Parafoil Unmanned Aerial Vehicle (PPUAV). The model is developed in the following three steps: obtaining a linear dynamic model, simplifying the model structure, and estimating the model mismatch due to model variance and external disturbance factors. First, a six degree-of-freedom linear model, or the structured model, is obtained through dynamic establishment and linearization. Second, the data correlation analysis is adopted to determine the criterion for proper model complexity and to simplify the structured model. Next, an active model is established, combining the simplified model with the model mismatch estimator. An adapted Kalman filter is utilized for the real-time estimation of states and model mismatch. We finally derive a linear system model while taking into account of model variance and external disturbance. Actual flight tests verify the effectiveness of our active model in different flight scenarios.     

Robust model predictive control for satellite formation keeping with eccentricity/inclination vector separation

This study presents model predictive formation control based on an eccentricity/inclination vector separation strategy. Alternative collision avoidance can be accomplished by using eccentricity/inclination vectors and adding a simple goal function term for optimization process. Real-time control is also achievable with model predictive controller based on convex formulation. Constraint-tightening approach is address as well improve robustness of the controller, and simulation results are presented to verify performance enhancement for the proposed approach.     

Predictive fault-tolerant control of an all-thruster satellite in 6-DOF motion via neural network model updating

The problem of controlling an all-thruster spacecraft in the coupled translational-rotational motion in presence of actuators fault and/or failure is investigated in this paper. The nonlinear model predictive control approach is used because of its ability to predict the future behavior of the system. The fault/failure of the thrusters changes the mapping between the commanded forces to the thrusters and actual force/torque generated by the thruster system. Thus, the basic six degree-of-freedom kinetic equations are separated from this mapping and a set of neural networks are trained off-line to learn the kinetic equations. Then, two neural networks are attached to these trained networks in order to learn the thruster commands to force/torque mappings on-line. Different off-nominal conditions are modeled so that neural networks can detect any failure and fault, including scale factor and misalignment of thrusters. A simple model of the spacecraft relative motion is used in MPC to decrease the computational burden. However, a precise model by the means of orbit propagation including different types of perturbation is utilized to evaluate the usefulness of the proposed approach in actual conditions. The numerical simulation shows that this method can successfully control the all-thruster spacecraft with ON-OFF thrusters in different combinations of thruster fault and/or failure.     

Sliding mode control design for oblique wing aircraft in wing skewing process

When the wing of Oblique Wing Aircraft (OWA) is skewed, the center of gravity, inertia and aerodynamic characteristics of the aircraft all significantly change, causing an undesirable flight dynamic response, affecting the flying qualities, and even endangering the flight safety. In this study, the dynamic response of an OWA in the wing skewing process is simulated, showing that the three-axis movements of the OWA are highly coupled and present nonlinear characteristics during the wing skewing. As the roll control efficiency of the aileron decreases due to the shortened control arm in an oblique configuration, the all-moving horizontal tail is used for additional roll and the control allocation is performed based on minimum control energy. Given the properties of pitch-roll-yaw coupling and control input and state coupling, and the difficulty of establishing an accurate aerodynamic model in the wing skewing process due to unsteady aerodynamic force, a multi-loop sliding mode controller is formulated by the time-scale separation method. The closed-loop simulation results show that the asymmetric aerodynamics can be balanced and that the velocity and altitude of the aircraft maintain stable, which means that a smooth transition is obtained during the OWA’s wing skewing.     

基于新陈代谢GM（1,1）模型的导弹遥测故障预测算法

在人工监视遥测关键参数是否超出阈值范围以判断导弹故障的传统模式基础上,对GM（1,1）预测模型进行了改进,研究了基于新陈代谢的GM（1,1）预测算法对遥测参数实时预测效果.该算法能不断去掉最老的信息,充分利用最新的信息,避免了预测模型老化的现象;由于用于预测的数列维度较少,便于计算,能够保证算法的实时性.用MATLAB编程实现算法,比对实测数据的预测值与实际值,并进行误差分析.结果表明,该算法对遥测参数的预测精度较高,可为及时发现导弹故障提供科学的依据.     

Stall flutter prediction based on multi-layer GRU neural network

The modeling of dynamic stall aerodynamics is essential to stall flutter, due to the flow separation in a large-amplitude pitching oscillation process. A newly neural network based Reduced Order Model (ROM) framework for predicting the aerodynamic forces of an airfoil undergoing large-amplitude pitching oscillation at various velocities is presented in this work. First, the dynamic stall aerodynamics is calculated by solving RANS equations and the transitional SST-γ model. Afterwards, the stall flutter bifurcation behavior is calculated by the above CFD solver coupled with structural dynamic equation. The critical flutter speed and limit-cycle oscillation amplitudes are consistent with those obtained by experiments. A newly multi-layer Gated Recurrent Unit (GRU) neural network based ROM is constructed to accelerate the calculation of aerodynamic forces. The training and validation process are carried out upon the unsteady aerodynamic data obtained by the proposed CFD method. The well-trained ROM is then coupled with the structure equation at a specific velocity, the Limit-Cycle Oscillation (LCO) of stall flutter under this flow condition is predicted precisely and more quickly. In order to predict both the critical flutter velocity and LCO amplitudes after bifurcation at different velocities, a new ROM with GRU neural network considering the variation of flow velocities is developed. The stall flutter results predicted by ROM agree well with the CFD ones at different velocities. Finally, a brief sensitivity analysis of two structural parameters of ROM is carried out. It infers the potential of the presented modeling method to depict the nonlinearity of dynamic stall and stall flutter phenomenon.     

航空发动机全飞行包线稳态划分方法研究

航空发动机在鲁棒控制器设计过程中存在飞行包线区域难以系统划分的问题,为此,提出基于推力耗油率特性和基于动压耗油率特性的航空发动机飞行包线划分法。根据某型涡扇发动机在全包线范围内稳态工作时的推力、耗油率及动压特性,结合大气条件的客观规律,通过两种划分方法将飞行包线划分为65 个区域,用每个区域对应标称点的参数代替其周围小偏差区域和边界点参数。通过对该发动机全包线内各区域标称点与边界点参数的对比,证明两种方法均对全飞行包线划分有效,可为后续航空发动机控制器设计提供理论基础。     

柔性航天器的动力学建模问题

首先简单介绍了关于柔性航天器动力学建模的一些综述论文,指出了柔性航天器动力学建模的困难所在。然后,分别对柔性体变形运动的描述模型,浮动参考架的选择、动力学方程的建立和模型降阶等问题进行了探讨。