空军移交修理企业应急作战条件下战场抢修组织体系建设研究

介绍了在现今条件下,空军移交修理企业通过建立高效能的军、企联合战场抢修领导机构和战场抢修办公室,组建一支由多个抢修分队构成,配备高素质复合型技能人才的飞机战场抢修队的情况。     

口语大赛背景下的高职英语口语教学现状调查研究

通过问卷调查与访谈的方式对口语大赛背景下的高职英语口语教学现状进行调合研究．及时分析从口语大赛中反映出来的高职英语口语教学问题：如传统英语学习文化的负面影响、口语课时严重不足、优秀口语教材欠缺、高素质英语口语教师缺乏、学生心珲素质欠佳、口语教学机制不健全等。针对以上问题积极探索相应的对策与措施，以期更好地发挥口语大赛对高职英语口语教学的启示与导向作用．从而更有效地提高学生英语口语表达能力。     

Advanced multiple response surface method of sensitivity analysis for turbine blisk reliability with multi-physics coupling

To reasonably implement the reliability analysis and describe the significance of influencing parameters for the multi-failure modes of turbine blisk, advanced multiple response surface method(AMRSM) was proposed for multi-failure mode sensitivity analysis for reliability. The mathematical model of AMRSM was established and the basic principle of multi-failure mode sensitivity analysis for reliability with AMRSM was given. The important parameters of turbine blisk failures are obtained by the multi-failure mode sensitivity analysis of turbine blisk. Through the reliability sensitivity analyses of multiple failure modes(deformation, stress and strain) with the proposed method considering fluid–thermal–solid interaction, it is shown that the comprehensive reliability of turbine blisk is 0.9931 when the allowable deformation, stress and strain are3.7*10~(-3)m, 1.0023*10~9 Pa and 1.05*10~(-2)m/m, respectively; the main impact factors of turbine blisk failure are gas velocity, gas temperature and rotational speed. As demonstrated in the comparison of methods(Monte Carlo(MC) method, traditional response surface method(RSM), multiple response surface method(MRSM) and AMRSM), the proposed AMRSM improves computational efficiency with acceptable computational accuracy. The efforts of this study provide the AMRSM with high precision and efficiency for multi-failure mode reliability analysis, and offer a useful insight for the reliability optimization design of multi-failure mode structure.     

芯子宽厚比对铝蜂窝夹层结构平压强度的影响

用正六边形代替实际蜂芯,推导了夹层结构的平压强度与芯子宽厚比的关系,并对八种规格的芯子平压强度进行统计,统计结果虽然与推导的结果有偏差,但规律却是一致的,即蜂窝夹层结构的平压强度随着芯子宽厚比d/t_s增大呈负指数减小。     

Automatic orbital docking with tumbling target using sliding mode control

The present study aimed to propose translational and rotational control of a chaser spacecraft in the close vicinity docking phase with a target subjected to external disturbances. For this purpose, two sliding mode controls (SMC) are developed to coordinate the relative position and attitude of two spacecraft. The chaser is guided to the tumbling target by the relative position control, approaching in the direction of the target docking port. At the same moment, the relative attitude control coordinates the chaser attitude so that it can be aligned with the target orientation. These control systems regulate the relative translational and rotational velocities to be zero when two spacecraft are docking. The robustness of the closed-loop system in the presence of external disturbances, measurement noises and uncertainties is guaranteed by analyzing and calculating the control gains via the Lyapunov function. The simulations in different scenarios indicated the effectiveness of the controller scheme and precise maneuver regarding the accuracy of docking conditions.     

基于滑模控制的剖面跟踪制导律

针对高超声速飞行器滑翔段的高精度制导问题，考虑复杂多约束条件以及干扰和不确定因素的影响，设计了一种基于全局积分滑模控制的剖面跟踪制导方法。首先，将多重约束转化为阻力加速度-速度（D-V）平面内的再入走廊；然后，以终端精度和总吸热量为性能指标，采用分段函数的形式优化设计出一条标准D-V剖面；再基于简化的动力学模型，推导得到关于阻力加速度微分和速度的二阶非线性模型；最后，基于滑模控制理论，设计全局积分滑模面和指数趋近律，获得控制量幅值大小，并结合侧向方位误差走廊确定控制量符号，从而实现对标准剖面的有效跟踪。采用CAV-H滑翔再入模型进行数值仿真，分析验证了提出的基于滑模控制的剖面跟踪制导律具有较好的跟踪性能和精度。     

Study of seasonal and long-term vertical deformation in Nepal based on GPS and GRACE observations

Lithospheric deformation signal can be detected by combining data from continuous global positioning system (CGPS) and satellite observations from the Gravity Recovery and Climate Experiment (GRACE). In this paper, we use 2.5- to 19-year-long time series from 35 CGPS stations to estimate vertical deformation rates in Nepal, which is located in the southern side of the Himalaya. GPS results were compared with GRACE observations. Principal component analysis was conducted to decompose the time series into three-dimensional principal components (PCs) and spatial eigenvectors. The top three high-order PCs were calculated to correct common mode errors. Both GPS and GRACE observations showed significant seasonal variations. The observed seasonal GPS vertical variations are in good agreement with those from the GRACE-derived results, particularly for changes in surface pressure, non-tidal oceanic mass loading, and hydrologic loading. The GPS-observed rates of vertical deformation obtained for the region suggest both tectonic impact and mass decrease. The rates of vertical crustal deformation were estimated by removing the GRACE-derived hydrological vertical rates from the GPS measurements. Most of the sites located in the southern part of the Main Himalayan Thrust subsided, whereas the northern part mostly showed an uplift. These results may contribute to the understanding of secular vertical crustal deformation in Nepal.     

A robust star identification algorithm with star shortlisting

A star tracker provides the most accurate attitude solution in terms of arc seconds compared to the other existing attitude sensors. When no prior attitude information is available, it operates in “Lost-In-Space (LIS)” mode. Star pattern recognition, also known as star identification algorithm, forms the most crucial part of a star tracker in the LIS mode. Recognition reliability and speed are the two most important parameters of a star pattern recognition technique. In this paper, a novel star identification algorithm with star ID shortlisting is proposed. Firstly, the star IDs are shortlisted based on worst-case patch mismatch, and later stars are identified in the image by an initial match confirmed with a running sequential angular match technique. The proposed idea is tested on 16,200 simulated star images having magnitude uncertainty, noise stars, positional deviation, and varying size of the field of view. The proposed idea is also benchmarked with the state-of-the-art star pattern recognition techniques. Finally, the real-time performance of the proposed technique is tested on the 3104 real star images captured by a star tracker SST-20S currently mounted on a satellite. The proposed technique can achieve an identification accuracy of 98% and takes only 8.2?ms for identification on real images. Simulation and real-time results depict that the proposed technique is highly robust and achieves a high speed of identification suitable for actual space applications.     

对失控航天器在轨服务的自适应滑模控制器设计

为实现对自由翻滚的失控目标航天器进行在轨服务,基于二阶滑模控制算法设计了相对位置与姿态耦合的自适应控制器。考虑相对转动对相对平动的耦合作用,建立了两航天器对接端口间相对位置与姿态耦合的动力学模型,并在此基础上设计了自适应Super twisting控制器,以减弱已知界限的有界干扰所产生的震颤效应,使闭环系统在有限时间内收敛到平衡点。利用李雅普诺夫方法证明了有界干扰下的闭环系统稳定性,并对收敛时间的上界进行了估计。仿真结果表明,与Super twisting算法相比,所设计的自适应二阶滑模控制器对参数不确定性及线性增长有界干扰具有较强的鲁棒性,且控制精度满足在轨服务的任务需求。     

飞机垂尾抖振响应的飞行试验研究

介绍了国内外垂尾抖振试飞的最新进展情况,并就抖振试飞中可以采用的试飞方法,从理论上进行了分析。飞行试验采用收敛转弯的试飞方法,通过在左、右垂尾上加装的振动加速度传感器,得到了不同马赫数下垂尾的抖振响应情况。在对数据进行均方根分析、时频分析和自功率谱密度分析等方法的基础上建立起抖振响应和迎角、频率的关系后发现：垂尾抖振响应主要集中在垂尾低阶模态频率上;垂尾的抖振响应随迎角、马赫数的增加而增加,其中受迎角的影响大于受马赫数的影响;且飞机在超过初始抖振迎角以后,随迎角的继续增加,垂尾翼尖后缘处的抖振响应显著大于垂尾翼尖前缘位置。