Improvement and application of Y2O3 directional solidification crucible

In order to satisfy the drastic temperature change and high chemical activity in directional solidification of Nb–Si based alloys, Y_2O_3 crucible is demanded to possess high thermal shock resistance and erosion resistance. This paper improved the sintering degree and density of Y_2O_3 crucible by optimizing the sintering temperature and time, and its practical application performance was investigated. Y_2O_3 grains gathered with the increase of sintering temperature and time, and the contact area enlarged, resulting in the open pores being changed into closed pores.The higher density caused the improvement of erosion resistance of Y_2O_3 crucibles. However, excessive density weakened the thermal shock resistance. Considering high-temperature strength, erosion resistance, thermal shock resistance and costs, optimum sintering temperature and time of Y_2O_3 directional solidification crucible were 1800 °C and 120 min, respectively, and the porosity was20%. Improved Y_2O_3 crucible has been successfully applied to directional solidification of Nb–Si based alloys, and significantly reduced the oxygen contamination. Slight interaction occurred between Hf and Y_2O_3, but no obvious dissolution, penetration or erosion was found, showing good erosion resistance and thermal shock resistance.     

Hot-cracking susceptibility and shear fracture behavior of dissimilar Ti6Al4V/AA6060 alloys in pulsed Nd:YAG laser welding

Laser welding of dissimilar titanium/aluminum alloys has been employed at an increasing rate, particularly in the aerospace industry, owing to its advantages in terms of current design flexibility and fuel/cost savings. The major problem with dissimilar Ti/Al welds arises from the difference in the thermal expansion and contraction of the two metals, which leads to hot-cracking susceptibility and the mitigation of the mechanical property after welding. In the present study, pulsed Nd:YAG laser welding of Ti6Al4V and AA6060 has been addressed. Hot-cracking susceptibility in the heat affected zone and the shear fracture behavior of the lap joints were investigated through microstructural characterization and mechanical tests. The results indicate that the hot cracking tendency can be reduced by increasing the pulse peak power (7.5–8.5 kW) and the laser point diameter (0.8–1.0 mm) with specific pulse duration and overlap. An alternative control strategy for less hot cracks in the Ti/Al lap joint can be to increase the weld width and decrease the cooling rate during solidification. The shear fracture of the Ti/Al lap joint is likely to occur along the lower side path of the weld interface with decreasing weld surface collapsed amount and increasing aluminum base metal melt depth.     

统一系统载波捕获方法研究

介绍了现代统一系统中载波频率快速捕获的几种方法,并提出了统一系统载波快速捕获的一种算法。最后,通过对几种不同方法的计算时间与识别精度的比较,验证了该算法的高效性。     

Classification of multitemporal Sentinel-2 data for field-level monitoring of rice cropping practices in Taiwan

Cadastral information of rice fields is important for monitoring cropping practices in Taiwan due to official initiatives. Remote sensing based rice monitoring has been a challenge for years because the size of rice fields is small, and crop mapping requires information of crop phenology, relating to spatiotemporal resolution of satellite data. This study aims to develop an approach for mapping rice-growing areas at field level using multi-temporal Sentinel-2 data in Taiwan. The data were processed for 2018, following four main steps: (1) construct time-series Enhanced Vegetation Index (EVI) and Land Surface Water Index (LSWI), (2) noise filtering of the time-series data using wavelet transform, (3) rice crop classification using information of crop phenology, and (4) parcel-based accuracy assessment of the mapping results. The parcel-to-parcel comparisons between mapping results and ground reference data indicated satisfactory results. These findings were confirmed by close agreement between satellite-derived rice area and government’s statistics. Although some factors, including mixed-pixel issues and cloud-cover effects, lowered the mapping accuracies of townships along the coastline, this study has demonstrated the efficacy of using multitemporal Sentinel-2 data to create a reliable database of rice-growing areas over a large and heterogeneous region. Such a quantitative information was important for updating rice crop maps and monitoring cropping practices.     

飞机技术出版物在飞机海外复装中的应用

以西锐SR2X飞机海外标准复装为例,初步探索了飞机技术出版物在通用飞机复装中的使用,明确了通用飞机复装的技术依据和作业流程,为未来通用飞机制造商或代理商复装飞机提供了工程经验。     

Earthquake induced dynamics at the ionosphere in presence of magnetic storm

The modifications induced in the dynamics of the ionosphere by the major Japan earthquake (EQ) of March 11, 2011 (epicenter at 38.322°N, 142.369°E, M = 8.9) in presence of a magnetic storm are examined by mapping latitudinal variations of F-layer ionization density (NmF2) from 22 stations covering the epicenter zone. The changes forced into the Total Electron Content (TEC) by the major EQ in the magnetic storm ambiance are also examined from the GPS data collected at Guwahati (26° 10′ N, 91° 45’ E), situated in the major fault system of East Asia. The contributions of pre-seismic electric field as well as of magnetic storm time electric field in the observed density variations are brought into the ambit of discussion. The influence of lower atmosphere in shaping TEC features during the study case is highlighted. The effects of solar activity on density variations during such complex ambiances are also addressed.     

Resistance Spot Welding Method for Metal-Based Fiber Bragg Grating Sensors

Aiming at the requirements of installation and work environment of metal-based fiber Bragg grating(FBG)sensor,a resistance spot welding method is presented.Firstly,the effect of welding parameters on welding quality is discussed theoretically,and a suitable resistance spot welding method for the metal-based FBG sensor is proposed for the first time.Then through serial resistance spot welding tests,the feasibility and practicability of the method are verified,and optimal welding parameters for two different tested metals are obtained.Fatigue performance test validates FBG sensors installed by the proposed method with good fatigue properties and long-term stable measurement performance.The research results can provide technical guidance for engineering structure long-term safety monitoring.     

Ionospheric response to the storm-time disturbance of 29 May, 2010

The Ionospheric F2-layer peak parameters response to a magnetic storm had been investigated over Ilorin, Nigeria (Lat. 8:53°N, Long. 4.5°E, dip angle, −2.96°), Jicamarca, Peru (11.95°S, 76.87°W, dip angle, 0.8°) and Hermanus, South Africa (34.42°S, 19.22°E, dip angle, −60.77°), using percentage enhancement/depletion values. Our results showed an enhancement in NmF2 at all of these stations. Averagely, pre-noon and post-noon peaks are highest at Ilorin during quiet time. The similar pattern observed for quiet condition between Ilorin and Jicamarca was due to their latitudinal positions. For disturbed NmF2 condition, Jicamarca and Ilorin recorded higher peaks at nighttime than during the daytime for the storms main phase, and the reverse over Hermanus. The nighttime and daytime increases were observed respectively at Ilorin and Hermanus during the recovery period. The hmF2 variation recorded higher enhancement at Jicamarca during the daytime and at Hermanus at nighttime during the main phase. During the recovery phase, the highest enhancement was recorded during the daytime at Jicamarca, and over Hermanus at nighttime. These observations find their explanation in the magnetospheric current, solar wind and E × B drift.     

考虑J_2摄动影响的零射程线计算方法研究

考虑到地球扁率J_2摄动的影响,在非正交分解法的基础上,利用自由段弹道地心距迭代解析解,给出了一种弹道飞行器零射程线的计算方法。数值仿真结果表明,该方法具有很高的精度,且计算速度较快,在闭路制导能量耗散和多弹头进攻弹道设计中具有较高的应用价值。     

某空空导弹发动机喷管制造技术

探讨了用不锈钢15-5PH焊接制造某空空导弹发动机喷管时的工艺路线、必要的工装及具体的控制变形的加工方法,保证了零件的质量.