高超声速气动热预测技术及发展趋势

高超声速气动热预测技术是高超声速飞行器发展的关键技术之一。对高超声速气动热预测技术的发展情况进行了分析探讨。首先,简要回顾了国内外高超声速气动热理论预测及地面实验技术的发展历程;在此基础上,结合典型外形的计算与风洞试验结果的比较,重点介绍分析了气动热工程计算方法、数值模拟方法、气动热风洞试验设备的模拟能力及目前实验测试技术的研究水平;最后,对气动热预测技术的发展趋势进行了讨论,提出了气动热预测技术应研究解决的问题。     

飞机液压系统动态油温计算方法优化

分析了动态油温计算方法的不足,将此方法中的液压油箱计算模型加以优化得到改进的动态油温计算方法,基于功率损失法给出了飞机液压系统中四种典型液压附件的温度计算方程。以某航空液压泵地面试验系统为计算实例,将改进方法计算的结果与试验结果、改进前方法的计算结果进行对比分析,结果表明改进的动态油温计算方法相比改进前的方法具有更高的准确度。     

一种减少失速保护虚警率的混合滤波方法

针对飞机失速保护设计过程中易出现虚警的情况,提出一种基于FIR和传统滤波器相结合的混合滤波方法。结合飞机本体的运动特征,对参与失速保护逻辑运算的两个重要参数,即侧向加速度和迎角信号进行频率分析,基于信号的特征设计混合滤波器,然后采用Simulink滤波工具箱设计滤波器对信号进行滤波处理。仿真结果表明该方法能够减少虚警率的发生,特别是大背景噪声下的虚警率能够得到较好抑制,验证了滤波器设计正确性,从而提高失速保护功能对适航条款符合性。该滤波器设计方法,不但可以有效解决本文提到的问题,对于其他涉及信号处理的系统设计同样具有借鉴意义。     

Numerical analysis and optimization of boundary layer suction on airfoils

Numerical approach of hybrid laminar flow control(HLFC) is investigated for the suction hole with a width between 0.5 mm and 7 mm. The accuracy of Menter and Langtry’s transition model applied for simulating the flow with boundary layer suction is validated. The experiment data are compared with the computational results. The solutions show that this transition model can predict the transition position with suction control accurately. A well designed laminar airfoil is selected in the present research. For suction control with a single hole, the physical mechanism of suction control, including the impact of suction coefficient and the width and position of the suction hole on control results, is analyzed. The single hole simulation results indicate that it is favorable for transition delay and drag reduction to increase the suction coefficient and set the hole position closer to the trailing edge properly. The modified radial basis function(RBF) neural network and the modified differential evolution algorithm are used to optimize the design for suction control with three holes. The design variables are suction coefficient, hole width, hole position and hole spacing. The optimization target is to obtain the minimum drag coefficient. After optimization,the transition delay can be up to 17% and the aerodynamic drag coefficient can decrease by 12.1%.     

Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding

Nanoparticles with the anti-wear and friction reducing features were applied as cooling lubricant in the grinding fluid. Dry grinding, flood grinding, minimal quantity of lubrication（MQL）, and nanoparticle jet MQL were used in the grinding experiments. The specific grinding energy of dry grinding, flood grinding and MQL were 84, 29.8, 45.5 J/mm³, respectively. The specific grinding energy significantly decreased to 32.7 J/mm³ in nanoparticle MQL. Compared with dry grinding, the surface roughness values of flood grinding, MQL, and nanoparticle jet MQL were significantly reduced with the surface topography profile values reduced by 11%, 2.5%, and 10%,respectively, and the ten point height of microcosmic unflatness values reduced by 1.5%, 0.5%,and 1.3%, respectively. These results verified the satisfactory lubrication effects of nanoparticle MQL. MoS₂, carbon nanotube（CNT）, and ZrO₂ nanoparticles were also added in the grinding fluid of nanoparticle jet MQL to analyze their grinding surface lubrication effects. The specific grinding energy of MoS₂ nanoparticle was only 32.7 J/mm³, which was 8.22% and 10.39% lower than those of the other two nanoparticles. Moreover, the surface roughness of workpiece was also smaller with MoS₂ nanoparticle, which indicated its remarkable lubrication effects. Furthermore,the role of MoS₂ particles in the grinding surface lubrication at different nanoparticle volume concentrations was analyzed. MoS₂ volume concentrations of 1%, 2%, and 3% were used.Experimental results revealed that the specific grinding energy and the workpiece surface roughness initially increased and then decreased as MoS₂ nanoparticle volume concentration increased.Satisfactory grinding surface lubrication effects were obtained with 2% MoS₂ nanoparticle volume concentration.     

燃气涡轮无气膜冷却动叶参数化设计系统应用

为进行燃气涡轮冷却结构的设计,在考虑总的温度分布系数(OTDF)及不考虑OTDF两种情况下,采用一套设计方法,完成了燃气涡轮第一级动叶冷却结构的整体设计。通过设计表明:采用管网计算,并通过三维导热计算进行热分析,最后通过气热耦合计算能够快速地设计出较佳的冷却结构;不考虑OTDF设计时,第一腔流量为16.9g/s,第二腔流量为40.8g/s,最大无量纲温度0.700,采用双进口蛇形通道,换热效果较佳,且结构设计较为简单;考虑OTDF时,为达到设计要求,第一腔流量为18.2g/s,第二腔流量为25.4g/s,第三腔流量为5.3g/s,最大无量纲温度0.752。通过多方案设计,得出在无气膜情况下,采用三个冷气进口多回转通道能够达到较好的冷却效果。     

某飞机多舱燃油箱洗涤惰化的工程计算

为研究某飞机多舱燃油箱洗涤惰化过程,将洗涤气分为与燃油发生传质部分和未发生传质部分,通过理论计算获得洗涤气与燃油发生传质并向气相空间逸出的氧气量.未发生传质的部分用于气相冲洗,其余与液相洗涤逸出量相结合,建立模型进行工程计算.由此将整个洗涤惰化过程转化为有逸出的气相冲洗过程.结果表明:这种将洗涤惰化转化为有逸出的冲洗模型是可行的,其结果与实验值基本吻合.随着时间的增长,气相氧体积分数一般经历先增长后下降的过程,最终趋向于洗涤气体积分数.多舱飞机燃油箱的各舱氧体积分数值变化快慢与进气出气口位置和各舱体积有关.      

基于非线性气动力的飞机飞行载荷计算

为了研究气动力非线性对飞机静气动弹性特性及飞行载荷的影响,发展了一种基于非线性气动力的飞机静气弹及飞行载荷计算方法。通过引入CFD计算结果,实现对线性方法中的气动力影响系数矩阵的非线性修正,采用模态法求解静气弹配平方程得到飞机非线性的气弹变形及飞行载荷。以某翼身组合体构型为计算算例,分别针对刚性模型和柔性模型,基于非线性气动力完成了飞机静气动弹性分析及载荷计算,并与线性结果进行了对比分析。结果表明,非线性方法可对大迎角范围内飞机静气弹变形及飞行载荷做出较合理的预测。     

一种临近空间升浮一体飞行器气动布局设计研究

应用理论方法和数值模拟方法开展升浮一体太阳能无人机气动布局设计研究,通过优化选形设计获得高升阻比气动布局,对比两种方法的计算结果以及分析存在差别的原因;应用张线天平支撑风洞试验测试技术,对设计布局开展实验验证研究,建立大展弦比的双机身气动布局风洞试验测试方法,分析了不同雷诺数下实验模型的纵向和横向气动特性影响。研究结果表明:风洞试验结果与设计结果吻合良好,验证了设计结果的可靠性,获得了对总体设计具有指导意义的结论和试验数据结果。     

S形进气道锤击波荷载特性分析

利用基于改进的延迟分离涡模拟（IDDES）方法,对亚声速和超声速来流条件下某S形模型进气道进行了非定常计算,研究了发动机喘振所产生的瞬时高压波形对锤击波传播规律的影响.结果表明:锤击波产生后沿进气道迅速向前传播,运动过程中锤击波的运动速度基本保持不变,但强度不断增强.同时受气流离心力的影响,S形进气道弯曲段半径较大一侧壁面受到的锤击波气动荷载值更大.发动机喘振所产生的瞬时高压的加载梯度增加使得锤击波传播速度及强度增强,而压力卸载方式对锤击波强度的影响不明显.在亚声速和超声速来流条件下,增加瞬时高压峰值均使得锤击波荷载强度显著增强,并近似符合二次函数分布规律,而且超声速来流条件下锤击波强度较亚声速来流更强.