纤维增强塑料/钢筋混凝土复合构件的强度分析

基于平截面假设和ERP／RC复合截面各组份材料的强度理论，推导并给出FRP包覆RC截面的抗压，抗拉，抗弯，抗剪强度计算公式，为实验研究与工程实用提供了理论依据。     

A thermal activation based constitutive model for the dynamic deformation of AA5083 processed by large-scale equal-channel angular pressing

Aluminum alloy 5083 (AA5083) processed by large-scale Equal-channel angular pressing (ECAP) is an excellent engineering material with great prospects for industrial applications. An accurate assessment of the underlying constitutive relationships with easily determined material constants is critical for the predictive design and informed processing of such structural materials. To develop such a design framework, uniaxial dynamic compressive tests over a wide range of temperatures (293–573 K) were carried out for an ECAP-processed AA5083 alloy. Additionally, the microstructure before and after dynamic loading was characterized by SEM and TEM. Based on the experimental results, a new dynamic constitutive model, based on thermal activation theory, was established to describe the plastic flow behavior of the AA5083 alloy that incorporates the effects of plastic strain, temperature, and strain rate. The input parameters of the new model were determined using a particle swarm optimization (PSO) method. The model predictions show excellent agreement with experimental results, which suggests that the current predictive constitutive model is highly effective in reproducing the dynamic deformation behavior of the large-scale ECAP-processed AA5083.     

Cutting force model and damage formation mechanism in milling of 70wt% Si/Al composite

High-mass fraction silicon aluminium composite(Si/Al composite) has unique properties of high specific strength, low thermal expansion coefficient, excellent wear resistance and weldability. It has attracted many applications in terms of radar communication, aerospace and automobile industry. However, rapid tool wear resulted from high cutting force and hard abrasion, and damaged machined surfaces are the main problem in machining Si/Al composite. This work aims to reveal the mechanisms of milli...     

Effect of blank quenching on shear spinning forming precision of 2219 aluminum alloy complex thin-walled components

The quenching-spinning (Q-S) process, i.e., shear spinning after blank quenching, has been increasingly utilized to form 2219 aluminum alloy complex thin-walled components. However, the changes in material property, shape and stress of the blanks after quenching will affect the spinning forming precision. In this study, the rules and mechanisms of these effects are investigated based on a combined finite element (FE) model including blank quenching and component spinning process. The results indicate that the increase of material strength and the existence of distortion of the quenched blank lead to a notable increase in the non-uniformity of the circumferential compressive stress in the spinning area and the increase of the flange swing height during spinning. These changes result in an increase in the wall thickness and component-mandrel gap of the components. The quenching residual stress has little effect on wall thickness and roundness but can noticeably reduce the component-mandrel gap. This is because that the existence of quenching residual stress of the blank can lead to the decrease of the maximum circumferential compressive stress of the workpiece in spinning and an obvious drop in the maximum compressive stress after reaching the stress peak. Quenching distortion is the main factor affecting the roundness. Moreover, the optimized installation way of the blank for spinning is obtained.     

双损耗Al2O3基多孔吸波材料的制备及其吸波性能

基于片状Al₂O₃陶瓷互锁结构强度高的特点,制备出夹杂石墨的高气孔率的Al₂O₃多孔陶瓷,并通过原位还原在多孔骨架中制备出Ni微粒,形成一种轻质的双损耗陶瓷基吸波材料。通过XRD、FE-SEM和EDS研究了还原温度对多孔吸波材料的组成、微观形貌、元素分布和吸波性能的影响。结果表明,还原温度升温至700 ℃可将多孔网络中Ni完全还原,形成以堆叠互锁Al₂O₃为基,夹杂片状石墨和孔表面覆盖Ni微粒的双损耗轻质吸波材料。当复合材料厚度为6.5 mm时,最小反射损耗为-35.01 dB,有效吸收带宽达到1.75 GHz。片状Al₂O₃锁定的石墨片构筑的导电网络,Ni微粒与基体之间的极化效应等共同促进复合材料良好的微波吸收性能。     

Interconnected Ni（OH）2 and polyether amine on carbon fiber surface for simultaneously improving interfacial adhesion of epoxy composites and electrochemical properties

Interconnected Ni（OH）₂ nanoflakes and polyether amine（PEA） were deposited on carbon fiber tows via a facial and effective process of chemical bath deposition and dip coating. Based on this, a win–win benefit of simultaneously improvements in interfacial shear strength（IFSS） of carbon fiber/epoxy composites and the electrochemical activity has been achieved. Compared with CF and CF-Ni（OH）₂ composites, the IFSS of CF-Ni（OH）₂-PEA/epoxy composite respectively increas...     

典型激波针减阻降热特性及流动机理

为研究激波针对超/高超声速钝头飞行器进行减阻降热的相关特性,采用数值模拟方法对6种典型激波针构型的流动特征开展系统研究。给出了激波针长度、来流马赫数对流动特征的影响规律,并对其形成机理进行了探讨。结果显示:马赫数较低时,头部有扰流物的5种激波针在回流区即将分裂时减阻率最大;马赫数较高时,减阻率在回流区分裂前后出现局部峰值,但最大减阻率将出现在回流区分裂后更长的激波针长度下。马赫数为3时,6种构型减阻率达最大时的相对长度在0.8~1.2之间,相比而言,球型、半球型和双锥型的减阻效果最好,最大减阻率为45%~50%;圆锥型最差,为20%~25%,明显低于头部有扰流物的构型。相同的激波针长度下,头部有扰流物构型的减阻率随马赫数增大而增大,圆锥型则相反。流场回流区、分离激波、弓形激波、局部膨胀流动等导致的压力分布变化是构型整体阻力变化的主要成因。      

航空发动机双层结构金属机匣的弹道试验

为研究航空发动机双层结构金属机匣在受叶片冲击时的包容性问题,利用滑膛炮试验系统对双层钛合金带不同间隙叠层靶板进行打靶弹道试验。通过28次有效的弹道试验发现:对比内层（迎弹面）、外层靶板厚度相同带间隙组合的试验结果,间隙越大靶板抗侵彻能力越差;对比不带间隙组合试验结果,内层较薄组合的抗侵彻能力强于内、外层厚度相同组合。采用商业有限元软件ANSYS/LS-DYNA对打靶试验进行了数值仿真,有限元仿真与试验结果吻合较好,并发现内层较薄组合的抗侵彻能力强于内层较厚组合,且两者均强于内、外层厚度相同组合;各个组合在没有间隙的情况下,弹道极限随叶片攻角增加而增加,但是速度曲线突增的攻角有所不同。无量纲靶厚决定了叶片冲击双层靶板的破坏模式。      

弯曲壁面流动分离及再附的尺度解析模拟

为准确预测弯曲壁面发生的流动分离及再附现象,基于模拟应力混合思想构建了新的RANS/LES混合框架,涡黏系数和湍动能耗散项中的长度尺度同步切换、涡解析区动态确定亚过滤尺度模型系数、采用混合过滤尺度匹配动态模型,并据此构造了k-ω基动态应力混合模型。首先利用槽道湍流检验了基准的亚过滤尺度模型和近壁RANS模型,前者解析获得了正确的湍流脉动近壁行为和相干结构,后者以很小代价捕捉到了雷诺应力分量的各向异性和松弛效应。随后利用周期性山算例考核了动态应力混合模型对分离再附湍流的预测精度,并与DDES,IDDES及SAS模型进行了对比。结果表明,三项改进使得动态应力混合模型具有近壁模拟能力且不存在对数律不匹配问题,涡解析能力优于DES类隐含的准代数模型,能够更好地捕捉压力梯度诱导的流动分离和再附,获得更为准确的壁面剪切应力、摩擦系数、压力系数、回流区,分离剪切层相干结构的分辨率更高。     

互换协调方案决策的探讨

论述了飞机制造互换协调方案决策中应注意的几个问题,即各种基本的互换协调方法的合理应用,“一次性”决策的原则,注意接口的协调性等。